User's Manual

AlarmDock Prem UI V1.9
Alarm Setting Sequence
Display sequence for setting the alarms
Accessible when speaker is ON or Standby
Buttons Used:
Set Button Press
Set Button - Rotary Function
Power Button
Hour digits will begin to flash instantly.
(Digits will flash after 3 s have elapsed,
not when the user releases button)
Minute digits will begin to flash instantly
Turn rotary button to change minutes
(track skip buttons can
also be used instead of rotary button)
Turn rotary button to change hour digit
(If clock is set to 12h - digits will cycle from 01-12 with AM
then 01-12 with PM showing)
(if 24h was set - digits will cycle from 00-23)
(Track skip buttons can
also be used instead of rotary button)
Days will begin to flash immediately.
Use the rotary button to scroll through 3 options:
1.All Week: All days will flash
2.Weekdays: Mo - Fr will flash
3.Weekends: Sa - Su will flash
Seperate Days can only be set through app
and then synced
(track skip buttons can
also be used instead of rotary button)
iPod icon will begin to flash immediately.
Use the rotary button to scroll through 3 wake up method:
1. iPod
2. FM
3. BUZZ
(track skip buttons can
also be used instead of rotary button)
No Activity for 5s
Returns to previous mode
Exits Sequece
Alarm Button pressed (long)
Set Button or Alarm button pressed (short/long)
To set alarm 1, Alarm 1 icon must be illuminated ONLY
To set alarm 2, Alarm 2 icon must be illuminated ONLY
Set Button or Alarm button pressed (short/long)
Set Button or Alarm button pressed (short/long)
Page 9 of 24