Instructions / Assembly

× 2 × 2 × 2 × 2

Lift assembled Privacy Screen up and place into your two

standalone bases.

Secure standalone base

to Privacy Screen with

supplied bolts, washers

and nuts.

Move entire assembled

Privacy Screen into final

location. Secure to floor

surface with appropriate

hardware. (Hardware

sold separately.)

ASSEMBLY INSTRUCTIONS

SURFACE MOUNT

Contents

IMPORTANT: READ BEFORE INSTALLATION

• Wood screws are sold separately.

• Ensure assembled parts are secured in place before leaving the structure

unattended.

V042103

Always wear safety goggles and gloves

throughout this project.

CAUTION

Visit www.distincthomeliving.com for additional assembly instructions

PAGE 1
SURFACE MOUNT ASSEMBLY INSTRUCTIONS Contents 2 ×2 ×2 ×2 ×2 Secure standalone base to Privacy Screen with supplied bolts, washers and nuts. 1 Lift assembled Privacy Screen up and place into your two standalone bases. 3 Move entire assembled Privacy Screen into final location. Secure to floor surface with appropriate hardware. (Hardware sold separately.) Visit www.distincthomeliving.com for additional assembly instructions Always wear safety goggles and gloves throughout this project.
PAGE 2
MONTAGE EN SURFACE INSTRUCTIONS D’ASSEMBLAGE Contents 2 ×2 ×2 ×2 ×2 Fixez chacune des bases autoportantes à l'écran d'intimité à l'aide des boulons, des rondelles et des écrous fournis. 1 Soulevez l'écran d'intimité assemblé et placez-le dans les deux bases autoportantes. 3 Déplacez l'écran assemblé là où il doit aller. Fixez à la surface du sol avec du matériel approprié. (Pièces de fixation vendues séparément) Rendez-vous à www.distincthomeliving.