User's Manual

《User Guide》_V1.0
Proprietary & Confidential -7-
5 Call Functions
5.1 Making a Call
When you want a call, in idle mode, select to open dialpad, input the area code and
phone number. Press “Options”, select “Save to phonebook” or “Call”.
Press * key until character “+” appears, and then you can dial an international number. (The
‘+’ stands for international dial code.) Then select
to dial the number. If the number is stored
with a name, it appears on the display when you dial the number.
Only in GSM system coverage, you can make an emergency call, even though the phone is
locked, without SIM card, or cannot enroll to the system.
 Quick making a call
i) In DialingScreen, select
, find the required number in phonebook;
ii) In DialingScreen, select
, select Missed calls, Dialed calls, Received calls and all
calls list.
5.2 Photo Contact
In idle mode, select
you can set 8 quick dial numbers. Press the number, add the name,
number and caller picture. Press “Options” to save or add detail. Then show the picture and name,
you can press the picture and operate.
5.3 Answering a Call
When somebody calls you, the phone rings. If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is displayed.
※Note: To answer a call, the function of call forwarding should be disabled, nor is unconditional
divert.
※
5.4 H-Free/H-Held
When you are driving, you can enable the phone hands free function during a call. The
phone sound will be heard from the speaker. During a call, select “H-Free”, then the speaker is
enabled. To disable the hands free function, select “H-Held”, then the receiver is enabled.
※Note：The speaker sound volume maybe loud, so please not use the speaker beside
ear.
※
5.5 Call Waiting
You can answer an incoming call while you have a call in progress, if this service is
supported by the network and you have set the Call Waiting menu option to activate. You will be
notified of an incoming call by a call waiting tone.
5.6 Call Options
5.6.1 During a call
Call with one party, select <Options> to select:
 Hold/Retrieve single call: pause the call, the caller will not be heard the sound. If
you want to retrieve the call, select “Retrieve”.
 End single call: Disconnect the call.
 Phonebook: enter phonebook menu.
 Call history: enter the call history menu.
 Messaging: enter message menu.
 Mute: turn on/off microphone.