Instruction Manual

JT2020 Mach 1 Operator’s Manual Service - 173
50 Hour
CMW
50 Hour
Drilling Unit
Change Fluid Pump Oil (Initial Service)
Change fluid pump oil after first 50 hours and every 1000 hours thereafter. Drain at plug (2) and fill with
NDO engine oil at plug (1). Maintain fluid level at fill plug.
Location Task Notes
DRILLING
UNIT
Change fluid pump oil Initial service, NDO
Check radiator
Change hydraulic filter Initial service
Check ground drive gearbox oil level 2 gearboxes, MPL
Check rotation gearbox oil level MPL
Lube rotation gearbox sliding output shaft EPS
Inspect thrust rollers