Instruction Manual

JT2020 Mach 1 Operator’s Manual Controls - 29
Left Control Console
CMW
5. Wrench control To clamp front wrench, move
to right.
To unclamp front wrench,
move to left.
To clamp and rotate rear
(rotating) wrench, push.
To unclamp rear (rotating)
wrench, pull.
6. Pipe lift switch To raise, press top.
To lower, press bottom.
7. Pipe shuttle switch To move toward pipe box,
press top.
To move toward spindle,
press bottom.
8. Two-speed rotation
switch
To rotate at low speed, high
torque, press right.
To rotate at high speed, low
torque, press left.
Item Description Notes