User guide

Service - 182 JT25 Operator’s Manual
1000 Hour
CMW
1000 Hour
Drilling Unit
Change Hydraulic Fluid and Filters
Change hydraulic fluid and filters every 1000
hours.
To change:
1. Drain hydraulic fluid at drain (3).
2. Change hydraulic filters. See “Change
Hydraulic Filters (Normal Conditions)” on
page 180.
3. Add THF at fill (1) until level is at halfway point
on sight glass (2)..
Location Task Notes
DRILLING
UNIT
Change hydraulic fluid and filters THF
Change ground drive gearbox oil 2 gearboxes, MPL
Change rotation gearbox oil MPL
Lube SaverLok connection EPG
Change heavy-duty anchor gearbox oil 2 gearboxes, MPL
IMPORTANT: Change oil and filter every 500
hours if jobsite temperature exceeds 100°F
(38°C) more than 50% of the time.
2
1
3
j37om054h.eps
j37om054h.eps