User guide

Service - 186 JT25 Operator’s Manual
As Needed
CMW
Change Fluid Pump Oil
Change fluid pump oil every 2000 hours.
To change:
1. Drain at plug (3). Ensure that magnetic drain
plug is cleaned of debris before reinstalling.
2. Add NDO at fill plug (2). Maintain fluid level at
fill plug (2). Inspect oil level at sight glass (1).
As Needed
Location Task Notes
DRILLING
UNIT
Change pipe auto lubricator TJC pail TJC
Change hydraulic filter Any time system is opened
Check pipeloader inserts
Check pipe guide inserts
Check fluid pump ball valve
Check track support slide pads
Change engine drive belt
Change air filter
Check wrench jaw inserts
Check SaverLok system
2
1
3
j37om024h.eps
j37om024h.eps