User guide

JT25 Operator’s Manual Controls - 31
Left Control Console
5. Pipe lift switch To raise, press top.
To lower, press bottom.
6. Pipe lubricator switch To apply joint compound,
press.
7. Carve window control To increase carve window
range, turn clockwise.
To decrease carve window
range, turn counterclockwise.
See “Use AutoCarve” on page 98.
8. AutoCarve switch To enable autocarve, press
top.
To deactivate autocarve,
press bottom.
Two-speed thrust is not allowed in
autocarve mode.
9. Fluid flow control To increase flow, turn
clockwise.
To decrease flow, turn
counterclockwise.
Item Description Notes
c00ic616h.eps
c00ic609h.eps
c00ic608h.eps