Manual

Systems and Equipment - 143 JT30 /JT30 All Terrain Operator’s Manual

Tracker Control

CMW

Tracker Control

Overview

This mode allows the Ditch Witch Tracker operator to disable hydraulic power to drilling unit thrust and

rotation.

Use tracker control any time you change downhole tools or during other times when the drill string is

exposed. Tracker control works by stopping communication between the tracker and the display. When

this happens, the green tracker control light on the drilling unit flashes and thrust and rotation are disabled.

Operation

Enable Thrust and Rotation

1. Start drilling unit.

2. Turn off tracker remote display.

3. Press and hold DOWNLOAD (1) while turning on

tracker remote display until a four-digit code (2)

appears.

Incorrect procedures could result in death, injury, or property damage.

Learn to use equipment correctly.

IMPORTANT: This mode does not disable thrust and rotation immediately. Functions are disabled within

16 seconds. Thrust and rotation are disabled when green light on drilling unit is flashing.

j07om023c.eps

SEL

OFF