Manual

JT30 /JT30 All Terrain Operator’s Manual Service - 230
As Needed
CMW
Change Drive Belt
Change engine drive belt as needed.
JT Units:
1. Turn off engine and remove key.
2. Use a 1/2” drive rachet at pulley (1) to remove
tension.
3. Remove belt (2).
4. Install new belt.
All Terrain Units:
1. Turn off engine and remove key.
2. Remove snap ring (3) from groove and slide
pump coupler collar (4) back.
3. Use a 1/2” drive rachet at pulley (1) to remove
tension.
4. Remove belt (2).
5. Install new belt.
6. Slide pump coupler collar back into position
and reinstall snap ring.