Owner manual
Table Of Contents
- Overview
- Foreword
- Contents
- Safety
- Controls
- Operation Overview
- Prepare
- Drive
- Transport
- Conduct a Bore
- Systems and Equipment
- Complete the Job
- Service
- Specifications
- Support
- Warranty
- Service Record
Manual Prepare - 63
Check Supplies and Prepare Equipment
CMW
Check Supplies and Prepare Equipment
Check Supplies
• receiver/transmitter or tracker with spare batteries
• beacons with new and spare batteries
• two-way radios with new and spare batteries
• quick wrench (see page 114)
• transition sub
• anchoring equipment and accessories
• bits, screens, nozzles (see page 109)
• adapters, pipe, beacon housings
• marking flags or paint
• water and additional hoses
• fuel (Use low sulfur or ultra low sulfur fuel only.)
• drilling fluid additives (see page 101)
• spare fuses
• keys
• backreamers, swivels, pulling devices (see page 109)
• wash down hose and spray gun
• duct tape
• spray lubricant
• tool joint compound (see page 130)
• electrically insulating boots and gloves
• personal protective equipment, such as hard hat and safety glasses
• notepad and pencil