Owner manual
Table Of Contents
- Overview
- Foreword
- Contents
- Safety
- Controls
- Operation Overview
- Prepare
- Drive
- Transport
- Conduct a Bore
- Systems and Equipment
- Complete the Job
- Service
- Specifications
- Support
- Warranty
- Service Record
JT922 Operator’s Manual Drive - 67
Shut Down Unit
CMW
Shut Down Unit
1. Stop track movement.
2. Lower drill frame and stabilizer to the ground.
3. Run engine at low throttle for 3 minutes to cool.
4. Turn key to STOP.
5. Remove key.
IMPORTANT: If frame and stabilizer cannot be lowered, use cylinder locks or other suitable
material to block the tracks. Remove cylinder locks or chocks before driving unit.