Manual

ManualsBrandsDitch Witch ManualsSpecial machineryRT115

RT115 Tier 3 - SUPPORT 1

SERIAL NUMBER RECORD

RT115 Tier 3 - SUPPORT 1

SERIAL NUMBER RECORD

SUPPORT

SERIAL NUMBER RECORD

Record serial numbers and date of purchase in spaces provided.

Tractor (1) and engine serial numbers (2) are located as shown.

Date of Manufacture:

Date of Purchase:

Tractor Serial Number:

Front Attachment Serial Number:

Rear Attachment Serial Number:

Trailer Serial Number:

Engine Serial Number:

SUPPORT

SERIAL NUMBER RECORD

Record serial numbers and date of purchase in spaces provided.

Tractor (1) and engine serial numbers (2) are located as shown.

Date of Manufacture:

Date of Purchase:

Tractor Serial Number:

Front Attachment Serial Number:

Rear Attachment Serial Number:

Trailer Serial Number:

Engine Serial Number:

Summary of content (252 pages)

PAGE 1
RT115 Tier 3 - SUPPORT 1 RT115 Tier 3 - SUPPORT 1 SERIAL NUMBER RECORD SERIAL NUMBER RECORD SUPPORT SUPPORT SERIAL NUMBER RECORD SERIAL NUMBER RECORD Record serial numbers and date of purchase in spaces provided. Tractor (1) and engine serial numbers (2) are located as shown. Record serial numbers and date of purchase in spaces provided. Tractor (1) and engine serial numbers (2) are located as shown.
PAGE 2
RT115 Tier 3- SUPPORT SUPPORT PROCEDURE RT115 Tier 3 - SUPPORT SUPPORT PROCEDURE SUPPORT PROCEDURE SUPPORT PROCEDURE Notify your dealer immediately of any malfunction or failure of Ditch Witch equipment. Notify your dealer immediately of any malfunction or failure of Ditch Witch equipment. Always give model, serial number, and approximate date of equipment purchase. This information should be recorded and placed on file by owner at time of purchase.
PAGE 3
RT115 Tier 3 - FOREWORD 3 RT115 Tier 3 - FOREWORD FOREWORD FOREWORD This manual is an important part of your equipment. It provides safety information and operation instructions to help you use and maintain your Ditch Witch equipment. This manual is an important part of your equipment. It provides safety information and operation instructions to help you use and maintain your Ditch Witch equipment. Read this manual before using your equipment.
PAGE 4
RT115 Tier 3- FOREWORD RT115 Tier 3 - FOREWORD RT115 Tier 3 RT115 Tier 3 Operator's Manual Operator's Manual Issue Number 1.1/OP-6/08 Issue Number 1.1/OP-6/08 Part Number 053-1214 Part Number 053-1214 Copyright 2007, 2008 Copyright 2007, 2008 by The Charles Machine Works, Inc., by The Charles Machine Works, Inc.
PAGE 5
RT115 Tier 3 - CONTENTS CONTENTS 5 RT115 Tier 3 - CONTENTS CONTENTS SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Serial Number Record . . . . . . . . . . . . . . . . . . . . . . . . . 1 Serial Number Record . . . . . . . . . . . . . . . . . . . . . . . . . 1 Support Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Support Procedure . . . . . . . . . .
PAGE 6
RT115 Tier 3- CONTENTS 6 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Underground Hazards . . . . . . . . . . . . . . . . . . . . . . . . 46 Underground Hazards . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
RT115 Tier 3 - CONTENTS 7 RT115 Tier 3 - CONTENTS TRENCHER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . 81 TRENCHER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . 81 Trencher Controls Overview . . . . . . . . . . . . . . . . . . . 81 Trencher Controls Overview . . . . . . . . . . . . . . . . . . . . 81 Trencher Control Descriptions . . . . . . . . . . . . . . . . . . 82 Trencher Control Descriptions . . . . . . . . . . . . . . . . . . 82 Setup . . . . . . . . . . . . . . . . . .
PAGE 8
RT115 Tier 3- CONTENTS 8 SAW ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 SAW ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Saw Controls Overview . . . . . . . . . . . . . . . . . . . . . . 115 Saw Controls Overview . . . . . . . . . . . . . . . . . . . . . . 115 Saw Control Descriptions . . . . . . . . . . . . . . . . . . . . 116 Saw Control Descriptions . . . . . . . . . . . . . . . . . . . . 116 Setup . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
RT115 Tier 3 - CONTENTS 9 RT115 Tier 3 - CONTENTS SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Approved Coolant. . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Approved Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Welding Precaution . . . . . . . . . . . . . . . . . . . . . . . . . 151 Welding Precaution . . . . . . . . . . . . . . . . . . . . .
PAGE 10
RT115 Tier 3- CONTENTS 10 RT115 Tier 3 - CONTENTS
PAGE 11
RT115 Tier 3 - OVERVIEW 11 RT115 Tier 3 - OVERVIEW OVERVIEW 11 OVERVIEW The RT115 Tier 3 tractor is designed for installation of service lines. It can be fitted with a trencher, vibratory plow, saw, backhoe or combo plow/trencher attachment. Optional enclosed cab, work lights, air conditioning, cruise control, rear and coordinated steering, drilling attachment, and reel carriers are also available. All rear-mounted attachments feature a new side plate frame mounting system.
PAGE 12
RT115 Tier 3- OVERVIEW 12 The H910 trencher for the RT115 Tier 3 tractor cuts a trench with maximum depth of 94” (2.4 m). Maximum trench width for the H910 is 24” (610 mm). The H910 trencher for the RT115 Tier 3 tractor cuts a trench with maximum depth of 94” (2.4 m). Maximum trench width for the H910 is 24” (610 mm). The H911 trencher for the RT115 Tier 3 tractor cuts a trench with maximum depth of 94” (2.4 m). Maximum trench width for the H911 is 24” (610 mm).
PAGE 13
RT115 Tier 3 - CONTROLS 13 RT115 Tier 3 - CONTROLS CONTROL CONSOLE OVERVIEW CONTROL CONSOLE OVERVIEW CONTROLS CONTROL CONSOLE OVERVIEW CONTROLS CONTROL CONSOLE OVERVIEW 1. Voltmeter 7. Drilling attachment control* 1. Voltmeter 7. Drilling attachment control* 2. Fuel gauge 8. Ignition switch 2. Fuel gauge 8. Ignition switch 3. Tachometer/ hourmeter/diagnostic gauge 9. Auxiliary power outlet 3. Tachometer/ hourmeter/diagnostic gauge 9. Auxiliary power outlet 4.
PAGE 14
RT115 Tier 3- CONTROLS CONTROL CONSOLE OVERVIEW CONTROL CONSOLE OVERVIEW (CONT) RT115 Tier 3 - CONTROLS CONTROL CONSOLE OVERVIEW CONTROL CONSOLE OVERVIEW (CONT) 13. Operator presence indicator 19. Low speed indicator 13. Operator presence indicator 19. Low speed indicator 14. Attachment speed/direction indicator 20. High speed indicator 14. Attachment speed/direction indicator 20. High speed indicator 15. Ground drive indicator 16. Cruise control indicator 17.
PAGE 15
RT115 Tier 3 - CONTROLS 15 RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Voltmeter Voltmeter This gauge displays electrical system voltage. Reading should show 12 to 15 volts with engine running. If not, stop engine and investigate. This gauge displays electrical system voltage. Reading should show 12 to 15 volts with engine running. If not, stop engine and investigate.
PAGE 16
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Tachometer/Hourmeter/ Diagnostic Gauge Tachometer/Hourmeter/ Diagnostic Gauge This gauge displays engine rpm, diagnostic codes, and records engine operating time. This gauge displays engine rpm, diagnostic codes, and records engine operating time. To view information, press the selection switch. To view information, press the selection switch.
PAGE 17
RT115 Tier 3 - CONTROLS 17 RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Engine Oil Pressure Gauge Engine Oil Pressure Gauge This gauge shows oil pressure. Normal operating pressure is 15-50 psi (105-345 kPa). This gauge shows oil pressure. Normal operating pressure is 15-50 psi (105-345 kPa). Alarm will sound if engine oil pressure is low. Alarm will sound if engine oil pressure is low. If pressure is low: If pressure is low: • Check oil level.
PAGE 18
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Ignition Switch Ignition Switch This three-position switch starts or stops engine. This three-position switch starts or stops engine. • Insert key and turn all the way clockwise to start engine. • Insert key and turn all the way clockwise to start engine. • Release when engine starts. • Release when engine starts. • Key will return to on position. • Key will return to on position.
PAGE 19
RT115 Tier 3 - CONTROLS 19 RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Hydraulic Motor Control Hydraulic Motor Control This switch allows operator to select high or low hydraulic motor speed. This switch allows operator to select high or low hydraulic motor speed. • Press left to select high speed. High speed indicator will light. • Press left to select high speed. High speed indicator will light. • Press right to select low speed.
PAGE 20
RT115 Tier 3- CONTROLS CONTROL CONSOLE DESCRIPTIONS Operator Presence Indicator Operator Presence Indicator This indicator lights when operator is in seat. This indicator is part of the start interlock system. This indicator lights when operator is in seat. This indicator is part of the start interlock system. IMPORTANT: All four start interlock indicators must be on to start engine. IMPORTANT: All four start interlock indicators must be on to start engine.
PAGE 21
RT115 Tier 3 - CONTROLS 21 RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Ground Drive Indicator Ground Drive Indicator Indicator lights when ground drive control is in neutral. Indicator lights when ground drive control is in neutral. Cruise Control Indicator Cruise Control Indicator Indicator lights when cruise control is operating. Indicator lights when cruise control is operating.
PAGE 22
RT115 Tier 3- CONTROLS CONTROL CONSOLE DESCRIPTIONS RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS Hydraulic Filter Restriction Indicator Hydraulic Filter Restriction Indicator This indicator lights when hydraulic filter is restricted. This indicator lights when hydraulic filter is restricted. Will also light in cold weather. Run tractor at low engine rpm until hyraulic fluid warms. Will also light in cold weather. Run tractor at low engine rpm until hyraulic fluid warms. c00ic045a.
PAGE 23
RT115 Tier 3 - CONTROLS 23 RT115 Tier 3 - CONTROLS CONTROL CONSOLE DESCRIPTIONS CONTROL CONSOLE DESCRIPTIONS Operator Alert Indicator Operator Alert Indicator This indicator alerts operator to Tier 3 engine fault conditions. This indicator alerts operator to Tier 3 engine fault conditions. • Light flashes when a "warning" fault is present. • Light flashes when a "warning" fault is present. • Light is steady when "engine shutdown" fault is present.
PAGE 24
RT115 Tier 3- CONTROLS CONTROL CONSOLE DESCRIPTIONS Engine Shutdown Indicator Engine Shutdown Indicator This indicator lights when a critical engine fault occurs. A fault code will be stored in the diagnostic gauge, and the engine will shut down within 30 seconds. This indicator lights when a critical engine fault occurs. A fault code will be stored in the diagnostic gauge, and the engine will shut down within 30 seconds.
PAGE 25
RT115 Tier 3 - CONTROLS 25 RT115 Tier 3 - CONTROLS DRIVE POSITION OVERVIEW DRIVE POSITION OVERVIEW DRIVE POSITION OVERVIEW DRIVE POSITION OVERVIEW 1. Parking brake 5. Tilt indicator 1. Parking brake 5. Tilt indicator 2. Gearbox control 6. Service brake 2. Gearbox control 6. Service brake 3. Attachment speed/ direction control 7. Ground drive hand control 3. Attachment speed/ direction control 7. Ground drive hand control 4. Steering wheel column tilt control 8.
PAGE 26
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS Parking Brake (orange) Parking Brake (orange) This lever controls parking brake. This lever controls parking brake. • Push to disengage. • Push to disengage. • Pull to engage. • Pull to engage. Gearbox Control (yellow) Gearbox Control (yellow) This lever allows operator to select high or low gearbox setting.
PAGE 27
RT115 Tier 3 - CONTROLS 27 RT115 Tier 3 - CONTROLS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS Attachment Speed/Direction Control (yellow) Attachment Speed/Direction Control (yellow) This lever controls rear attachment speed and direction. This lever controls rear attachment speed and direction. • Push to rotate forward or to start plow vibrator box. • Push to rotate forward or to start plow vibrator box. • Pull to rotate backward. • Pull to rotate backward.
PAGE 28
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS Tilt Indicator Tilt Indicator Indicates tilt away from level. Indicates tilt away from level. Service Brake Service Brake This pedal stops tractor. This pedal stops tractor. • Press to stop tractor. • Press to stop tractor. • Release to move tractor. • Release to move tractor.
PAGE 29
RT115 Tier 3 - CONTROLS 29 RT115 Tier 3 - CONTROLS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS Ground Drive Hand Control (black) Ground Drive Hand Control (black) This lever controls unit speed and direction. This lever controls unit speed and direction. • Pull up on collar to unlock. • Pull up on collar to unlock. • Push forward to go forward. • Push forward to go forward. • Pull back to go backward. • Pull back to go backward.
PAGE 30
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS DRIVE POSITION DESCRIPTIONS DRIVE POSITION DESCRIPTIONS Ground Drive Foot Control Ground Drive Foot Control This pedal controls forward or backward tractor movement. This pedal controls forward or backward tractor movement. • Press top to increase forward speed. • Press top to increase forward speed. • Press bottom increase reverse speed. • Press bottom increase reverse speed. • Release to reduce speed in either direction.
PAGE 31
RT115 Tier 3 - CONTROLS 31 RT115 Tier 3 - CONTROLS WORK POSITION OVERVIEW WORK POSITION OVERVIEW WORK POSITION OVERVIEW WORK POSITION OVERVIEW 1. Rear steer adjustment selector* 2. Steer select control* 3. Frame tilt control* 4. Throttle 5. Diagnostic connector 6. Cruise control selector* 7. Cruise control RPM selector* 8. Trench Depth Meter* 9. Climate control selector* 10. Air conditioning control* 11. Fan speed control selector* 12. Auxiliary circuit pressure gauge 13.
PAGE 32
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS WORK POSITION DESCRIPTIONS WORK POSITION DESCRIPTIONS WORK POSITION DESCRIPTIONS Rear Steer Adjustment Selector Rear Steer Adjustment Selector This optional knob turns rear tires to right or left. Arrow indicates direction of tires. This optional knob turns rear tires to right or left. Arrow indicates direction of tires. • Turn knob counterclockwise to turn wheels to left.
PAGE 33
RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS Frame Tilt Control Frame Tilt Control This optional switch tilts frame left or right. This optional switch tilts frame left or right. • Press right side to tilt right. • Press right side to tilt right. • Press left side to tilt left. • Press left side to tilt left. c00ic070a.eps c00ic070a.eps Throttle (orange) Throttle (orange) This lever controls engine speed. This lever controls engine speed. • Move left to increase speed.
PAGE 34
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS WORK POSITION DESCRIPTIONS Diagnostic Connector Diagnostic Connector This connector allows manual reading of diagnostic codes. This connector allows manual reading of diagnostic codes. IMPORTANT: For more information about the diagnostic system and trouble codes see "Tier 3 Service Overview" in SERVICE. IMPORTANT: For more information about the diagnostic system and trouble codes see "Tier 3 Service Overview" in SERVICE.
PAGE 35
RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS Cruise Control RPM Selector Cruise Control RPM Selector This optional control adjusts engine rpm. This optional control adjusts engine rpm. • Turn knob clockwise to increase engine rpm. This typically decreases ground speed. • Turn knob clockwise to increase engine rpm. This typically decreases ground speed. • Turn knob counterclockwise to decrease engine rpm. This typically increases ground speed.
PAGE 36
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS WORK POSITION DESCRIPTIONS Air Conditioning Control Air Conditioning Control This optional switch activates cab air conditioning. This optional switch activates cab air conditioning. • Press top to turn air conditioning on. • Press top to turn air conditioning on. • Press bottom to turn air conditioning off. • Press bottom to turn air conditioning off.
PAGE 37
RT115 Tier 3 - CONTROLS WORK POSITION DESCRIPTIONS Auxiliary Circuit Pressure Gauge Auxiliary Circuit Pressure Gauge This gauge displays auxiliary system pressure. Maximum operating pressure is 2500 psi (172 bar). This gauge displays auxiliary system pressure. Maximum operating pressure is 2500 psi (172 bar). Axle Lock Control Axle Lock Control This switch locks rear axle. This switch locks rear axle. • Press top to lock axle. • Press top to lock axle. • Press bottom to unlock axle.
PAGE 38
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS SEAT ADJUSTMENT OVERVIEW SEAT ADJUSTMENT OVERVIEW 2 SEAT ADJUSTMENT OVERVIEW 1 4 t03om014a.eps SEAT ADJUSTMENT OVERVIEW 2 3 1 4 t03om014a.eps 3 1. Seat slide control 3. Seat pivot control 1. Seat slide control 3. Seat pivot control 2. Armrest adjustment control 4. Seat height adjustment lock (located on opposite side) 2. Armrest adjustment control 4.
PAGE 39
RT115 Tier 3 - CONTROLS 39 RT115 Tier 3 - CONTROLS SEAT ADJUSTMENT DESCRIPTIONS SEAT ADJUSTMENT DESCRIPTIONS SEAT ADJUSTMENT DESCRIPTIONS SEAT ADJUSTMENT DESCRIPTIONS Seat Slide Control Seat Slide Control This control slides operator’s seat forward or backward. This control slides operator’s seat forward or backward. Armrest Adjustment Control Armrest Adjustment Control These controls raise and lower armrests. These controls raise and lower armrests. To adjust: To adjust: • Remove knob.
PAGE 40
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS SEAT ADJUSTMENT DESCRIPTIONS SEAT ADJUSTMENT DESCRIPTIONS Seat Height Adjustment Lock Seat Height Adjustment Lock This control locks seat height. This control locks seat height. • Rotate clockwise to lock seat height. • Rotate clockwise to lock seat height. • Rotate counterclockwise to unlock seat height. • Rotate counterclockwise to unlock seat height.
PAGE 41
RT115 Tier 3 - CONTROLS 41 RT115 Tier 3 - CONTROLS OVERHEAD CONSOLE OVERVIEW OVERHEAD CONSOLE OVERVIEW OVERHEAD CONSOLE OVERVIEW OVERHEAD CONSOLE OVERVIEW 1. Windshield wiper switch* 1. Windshield wiper switch* 2. Warning flasher switch* 2. Warning flasher switch* 3. Light switch* 3.
PAGE 42
RT115 Tier 3- CONTROLS RT115 Tier 3 - CONTROLS OVERHEAD CONSOLE DESCRIPTIONS OVERHEAD CONSOLE DESCRIPTIONS OVERHEAD CONSOLE DESCRIPTIONS OVERHEAD CONSOLE DESCRIPTIONS Windshield Wiper Switch Windshield Wiper Switch This optional switch controls windshield wipers. This optional switch controls windshield wipers. • Press top to turn on. • Press top to turn on. • Press top to end to wash windshield. • Press top to end to wash windshield. • Press bottom to turn off.
PAGE 43
RT115 Tier 3 - CONTROLS 43 RT115 Tier 3 - CONTROLS OVERHEAD CONSOLE DESCRIPTIONS OVERHEAD CONSOLE DESCRIPTIONS Light Switch Light Switch This optional switch controls lights. This optional switch controls lights. • Press top to turn on. • Press top to turn on. • Press bottom to turn off. • Press bottom to turn off.
PAGE 44
RT115 Tier 3- CONTROLS OVERHEAD CONSOLE DESCRIPTIONS RT115 Tier 3 - CONTROLS OVERHEAD CONSOLE DESCRIPTIONS
PAGE 45
RT115 Tier 3 - SAFETY 45 RT115 Tier 3 - SAFETY SAFETY SAFETY Follow these guidelines before operating any jobsite equipment: Follow these guidelines before operating any jobsite equipment: • Complete proper training and read operator’s manual before using equipment. • Complete proper training and read operator’s manual before using equipment.
PAGE 46
RT115 Tier 3- SAFETY RT115 Tier 3 - SAFETY ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES Fire Extinguisher Fire Extinguisher If required, a fire extinguisher should be mounted near the power unit but away from possible points of ignition. The fire extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory requirements. If required, a fire extinguisher should be mounted near the power unit but away from possible points of ignition.
PAGE 47
RT115 Tier 3 - SAFETY 47 RT115 Tier 3 - SAFETY 47 EMERGENCY PROCEDURES EMERGENCY PROCEDURES EMERGENCY PROCEDURES EMERGENCY PROCEDURES Before operating any equipment, review emergency procedures and check that all safety precautions have been taken. Before operating any equipment, review emergency procedures and check that all safety precautions have been taken. EMERGENCY SHUTDOWN - Turn ignition switch to stop position or push remote engine stop button.
PAGE 48
RT115 Tier 3- SAFETY RT115 Tier 3 - SAFETY EMERGENCY PROCEDURES EMERGENCY PROCEDURES If an Electric Line is Damaged If an Electric Line is Damaged If you suspect an electric line has been damaged and you are on tractor, DO NOT MOVE. Remain on tractor and take the following actions. The order and degree of action will depend upon the situation. If you suspect an electric line has been damaged and you are on tractor, DO NOT MOVE. Remain on tractor and take the following actions.
PAGE 49
RT115 Tier 3 - SAFETY 49 RT115 Tier 3 - SAFETY 49 EMERGENCY PROCEDURES EMERGENCY PROCEDURES If a Gas Line is Damaged If a Gas Line is Damaged If you suspect a gas line has been damaged, take the following actions. The order and degree of action will depend on the situation. If you suspect a gas line has been damaged, take the following actions. The order and degree of action will depend on the situation. • Immediately shut off engine(s), if this can be done safely and quickly.
PAGE 50
RT115 Tier 3- SAFETY RT115 Tier 3 - SAFETY JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION Inspecting Jobsite Inspecting Jobsite • Follow U.S. Department of Labor regulations on excavating and trenching (Part 1926, Subpart P) and other similar regulations. • Follow U.S. Department of Labor regulations on excavating and trenching (Part 1926, Subpart P) and other similar regulations.
PAGE 51
RT115 Tier 3 - SAFETY 51 RT115 Tier 3 - SAFETY JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION Selecting a Classification Selecting a Classification Jobsites are classified according to underground hazards present. Jobsites are classified according to underground hazards present. If working . . . then classify jobsite as . . . If working . . . then classify jobsite as . . .
PAGE 52
RT115 Tier 3- SAFETY RT115 Tier 3 - SAFETY JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION Applying Precautions Applying Precautions Once classified, precautions appropriate for jobsite must be taken. Once classified, precautions appropriate for jobsite must be taken. Electric Jobsite Precautions Electric Jobsite Precautions Use one or both of these methods. Use one or both of these methods. • Expose line by careful hand digging or soft excavation.
PAGE 53
RT115 Tier 3 - SAFETY 53 RT115 Tier 3 - SAFETY 53 JOBSITE CLASSIFICATION JOBSITE CLASSIFICATION Crystalline Silica (Quartz) Dust Precautions Crystalline Silica (Quartz) Dust Precautions Follow OSHA or other guidelines for exposure to crystalline silica when trenching, sawing or drilling through material that might produce dust containing crystalline silica (quartz).
PAGE 54
RT115 Tier 3- SAFETY SAFETY ALERT CLASSIFICATIONS RT115 Tier 3 - SAFETY SAFETY ALERT CLASSIFICATIONS SAFETY ALERT CLASSIFICATIONS SAFETY ALERT CLASSIFICATIONS These classifications and the icons defined on the following pages work together to alert you to situations which could be harmful to you, jobsite bystanders or your equipment. When you see these words and icons in the book or on the machine, carefully read and follow all instructions. YOUR SAFETY IS AT STAKE.
PAGE 55
RT115 Tier 3 - SAFETY 55 RT115 Tier 3 - SAFETY SAFETY ALERTS SAFETY ALERTS SAFETY ALERTS SAFETY ALERTS 55 Turning shaft will kill you or crush arm or leg. Stay away. Turning shaft will kill you or crush arm or leg. Stay away. Electric shock. Contacting electric lines will cause death or serious injury. Know location of lines and stay away. Electric shock. Contacting electric lines will cause death or serious injury. Know location of lines and stay away. Deadly gases.
PAGE 56
RT115 Tier 3- SAFETY SAFETY ALERTS RT115 Tier 3 - SAFETY SAFETY ALERTS Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Crushing weight could cause death or serious injury.
PAGE 57
RT115 Tier 3 - SAFETY 57 RT115 Tier 3 - SAFETY 57 SAFETY ALERTS SAFETY ALERTS Explosion possible. Serious injury or equipment damage could occur. Follow directions carefully. Explosion possible. Serious injury or equipment damage could occur. Follow directions carefully. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly.
PAGE 58
RT115 Tier 3- SAFETY SAFETY ALERTS RT115 Tier 3 - SAFETY SAFETY ALERTS Fire or explosion possible. Fumes could ignite and cause burns. No smoking, no flame, no spark. Fire or explosion possible. Fumes could ignite and cause burns. No smoking, no flame, no spark. Moving traffic - hazardous situation. Death or serious injury could result. Avoid moving vehicles, wear high visibility clothing, post appropriate warning signs. Moving traffic - hazardous situation. Death or serious injury could result.
PAGE 59
RT115 Tier 3 - SAFETY 59 RT115 Tier 3 - SAFETY SAFETY ALERTS SAFETY ALERTS Flying objects may cause injury. Wear hard hat and safety glasses. Flying objects may cause injury. Wear hard hat and safety glasses. Hot parts may cause burns. Do not Hot parts may cause burns. Do not touch until cool. touch until cool. Exposure to high noise levels may cause hearing loss. Wear hearing protection. Exposure to high noise levels may cause hearing loss. Wear hearing protection. Fall possible.
PAGE 60
RT115 Tier 3- SAFETY SAFETY ALERTS RT115 Tier 3 - SAFETY SAFETY ALERTS
PAGE 61
RT115 Tier 3 - TRACTOR 61 RT115 Tier 3 - TRACTOR DAILY INSPECTION DAILY INSPECTION TRACTOR TRACTOR DAILY INSPECTION DAILY INSPECTION For safe and efficient use of your machine, do the following before each day’s work. For safe and efficient use of your machine, do the following before each day’s work. • Check general appearance of tractor and attachments. Look for loose, worn, or damaged parts and fluid leaks. • Check general appearance of tractor and attachments.
PAGE 62
RT115 Tier 3- TRACTOR RT115 Tier 3 - TRACTOR START UP START UP START UP START UP Before operating tractor, read engine manufacturer’s starting and operating instructions. Follow instructions for new engine break-in. Before operating tractor, read engine manufacturer’s starting and operating instructions. Follow instructions for new engine break-in. Explosion possible. Serious injury or equipment damage could occur. Follow directions carefully.
PAGE 63
RT115 Tier 3 - TRACTOR 63 RT115 Tier 3 - TRACTOR 63 START UP START UP Rollover possible. If machine rolls over, you could be thrown from seat and killed or crushed. Wear seat belt. sf1011 Rollover possible. If machine rolls over, you could be thrown from seat and killed or crushed. Wear seat belt. sf1011 NOTICE: NOTICE: • Read operator’s manual before operating equipment. Follow instructions carefully. Contact Ditch Witch dealership for operation information or demonstration.
PAGE 64
RT115 Tier 3- TRACTOR RT115 Tier 3 - TRACTOR START UP START UP 5. Turn ignition switch to start tractor. Warning alarm will sound. Indicators will light. 5. Turn ignition switch to start tractor. Warning alarm will sound. Indicators will light. If engine does not crank, check start interlock display. See CONTROLS for start interlock information. If engine turns but does not start within 10 seconds, allow starter to cool before trying to start again.
PAGE 65
RT115 Tier 3 - TRACTOR 65 RT115 Tier 3 - TRACTOR OPERATION OPERATION OPERATION OPERATION EMERGENCY SHUTDOWN: Turn ignition switch to STOP. 65 EMERGENCY SHUTDOWN: Turn ignition switch to STOP. 1. Turn on lights and warning flasher, as needed. 1. Turn on lights and warning flasher, as needed. 2. Tilt steering wheel column down. 2. Tilt steering wheel column down. 3. Raise backfill blade and all attachments. 3. Raise backfill blade and all attachments. 4.
PAGE 66
RT115 Tier 3- TRACTOR RT115 Tier 3 - TRACTOR SHUTDOWN SHUTDOWN SHUTDOWN SHUTDOWN 1. When job is complete, move ground drive control to neutral. 1. When job is complete, move ground drive control to neutral. 2. Tilt steering wheel column up. 2. Tilt steering wheel column up. 3. Engage parking brake and verify parking brake indicator is on. 3. Engage parking brake and verify parking brake indicator is on. 4. Lower all attachments to ground. 4. Lower all attachments to ground. 5.
PAGE 67
RT115 Tier 3 - TRANSPORTATION 67 RT115 Tier 3 - TRANSPORTATION 67 LIFT LIFT TRANSPORTATION TRANSPORTATION LIFT LIFT Lifting Points Lifting Points Lifting points are identified by lifting decals. Lifting at any other point is unsafe and can damage machinery. Lifting points are identified by lifting decals. Lifting at any other point is unsafe and can damage machinery. Tractor Tractor Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight.
PAGE 68
RT115 Tier 3- TRANSPORTATION RT115 Tier 3 - TRANSPORTATION LIFT Crushing weight. If load falls or moves, it could kill or crush you. Use proper procedures and equipment or stay away. LIFT Crushing weight. If load falls or moves, it could kill or crush you. Use proper procedures and equipment or stay away. Centerline Trencher Centerline Trencher Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Before lifting, check SPECIFICATIONS.
PAGE 69
RT115 Tier 3 - TRANSPORTATION 69 RT115 Tier 3 - TRANSPORTATION 69 LIFT LIFT Traversing Trencher Traversing Trencher Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Plow Plow t03om080a.eps Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. t03om080a.eps Before lifting, check SPECIFICATIONS.
PAGE 70
RT115 Tier 3- TRANSPORTATION LIFT Combo t03om011h.eps RT115 Tier 3 - TRANSPORTATION LIFT Combo t03om011h.eps Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Saw Saw t03om081a.eps t03om081a.eps Before lifting, check SPECIFICATIONS. Use a hoist capable of supporting equipment’s size and weight. Before lifting, check SPECIFICATIONS.
PAGE 71
RT115 Tier 3 - TRANSPORTATION 71 RT115 Tier 3 - TRANSPORTATION TIEDOWN TIEDOWN TIEDOWN TIEDOWN Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Tiedown Points Tiedown Points Tiedown points are identified by tiedown decals. Securing unit to trailer at any other points may be unsafe and can damage machinery.
PAGE 72
RT115 Tier 3- TRANSPORTATION TIEDOWN RT115 Tier 3 - TRANSPORTATION TIEDOWN Centerline Trencher Centerline Trencher Lower trencher to trailer and tie down at attachment frame and through boom. Lower trencher to trailer and tie down at attachment frame and through boom. Traversing Trencher Traversing Trencher Lower trencher to trailer and tie down at attachment frame and through boom. Lower trencher to trailer and tie down at attachment frame and through boom.
PAGE 73
RT115 Tier 3 - TRANSPORTATION 73 RT115 Tier 3 - TRANSPORTATION TIEDOWN TIEDOWN Plow Plow t03om084a.eps Lower plow to trailer and tie down at attachment frame and vibrator box. NOTICE: Unsecured plow can swing outside the trailer and become a traffic hazard. Lower plow and chain to trailer before hauling. 73 t03om084a.eps Lower plow to trailer and tie down at attachment frame and vibrator box. NOTICE: Unsecured plow can swing outside the trailer and become a traffic hazard.
PAGE 74
RT115 Tier 3- TRANSPORTATION TIEDOWN Combo t03om010h.eps Lower trencher and plow to trailer and tie down at attachment frame and plow vibrator box. RT115 Tier 3 - TRANSPORTATION TIEDOWN Combo t03om010h.eps Lower trencher and plow to trailer and tie down at attachment frame and plow vibrator box.
PAGE 75
RT115 Tier 3 - TRANSPORTATION 75 RT115 Tier 3 - TRANSPORTATION TIEDOWN TIEDOWN Saw Saw t03om085a.eps t03om085a.eps Lower saw to trailer and tie down at attachment frame and at hook on rear of saw. Lower saw to trailer and tie down at attachment frame and at hook on rear of saw. Reel Carrier Reel Carrier Lower reel carrier to trailer and tie down at attachment arms. Lower reel carrier to trailer and tie down at attachment arms.
PAGE 76
RT115 Tier 3- TRANSPORTATION RT115 Tier 3 - TRANSPORTATION HAUL HAUL HAUL HAUL Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. NOTICE: NOTICE: • Read trailer operator’s manual before loading or transporting your machine. Incorrectly loaded machine can slip or cause trailer sway.
PAGE 77
RT115 Tier 3 - TRANSPORTATION 77 RT115 Tier 3 - TRANSPORTATION 77 HAUL HAUL Loading Loading 1. Fasten and adjust seatbelt. 1. Fasten and adjust seatbelt. 2. Tilt steering wheel column down. 2. Tilt steering wheel column down. 3. Start tractor. See TRACTOR for proper start-up procedures. 3. Start tractor. See TRACTOR for proper start-up procedures. 4. Raise attachments, but keep them low. 4. Raise attachments, but keep them low. 5.
PAGE 78
RT115 Tier 3- TRANSPORTATION RT115 Tier 3 - TRANSPORTATION HAUL HAUL Unloading Unloading 1. Check that parking brake is engaged and verify that parking brake indicator is on. 1. Check that parking brake is engaged and verify that parking brake indicator is on. 2. Check that ground drive control is in neutral. 2. Check that ground drive control is in neutral. 3. Remove tiedowns. 3. Remove tiedowns. 4. Fasten and adjust seatbelt. 4. Fasten and adjust seatbelt. 5.
PAGE 79
RT115 Tier 3 - TRANSPORTATION 79 RT115 Tier 3 - TRANSPORTATION TOW TOW TOW TOW Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Under normal conditions, unit should not be towed. If unit becomes disabled and towing is necessary: Under normal conditions, unit should not be towed.
PAGE 80
RT115 Tier 3- TRANSPORTATION RT115 Tier 3 - TRANSPORTATION TOW TOW Procedure Procedure 1. Engage parking brake. 1. Engage parking brake. 2. Attach tow line to all available tie-down points facing towing vehicle. 2. Attach tow line to all available tie-down points facing towing vehicle. 3. Block front and rear tires to prevent unit from rolling. 3. Block front and rear tires to prevent unit from rolling. 4. Activate the tow valve. 4. Activate the tow valve. • Remove floor plate.
PAGE 81
RT115 Tier 3 - TRENCHER ATTACHMENT 81 RT115 Tier 3 - TRENCHER ATTACHMENT 81 TRENCHER CONTROLS OVERVIEW TRENCHER CONTROLS OVERVIEW TRENCHER ATTACHMENT TRENCHER CONTROLS OVERVIEW TRENCHER ATTACHMENT TRENCHER CONTROLS OVERVIEW 1. Cruise control selector* 4. Boom lift control 1. Cruise control selector* 4. Boom lift control 2. Trencher slide control 5. Cruise control RPM control* 2. Trencher slide control 5. Cruise control RPM control* 3. Trench cleaner lift control* 6. Trench Depth Meter* 3.
PAGE 82
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT TRENCHER CONTROL DESCRIPTIONS TRENCHER CONTROL DESCRIPTIONS TRENCHER CONTROL DESCRIPTIONS TRENCHER CONTROL DESCRIPTIONS Cruise Control Selector Cruise Control Selector This optional switch activates the cruise control feature. This optional switch activates the cruise control feature. • Press right to turn on. • Press right to turn on. • Press left to turn off. • Press left to turn off.
PAGE 83
RT115 Tier 3 - TRENCHER ATTACHMENT TRENCHER CONTROL DESCRIPTIONS Trench Cleaner Lift Control Trench Cleaner Lift Control This optional lever raises or lowers trench cleaner. This optional lever raises or lowers trench cleaner. • Push to lower • Push to lower • Pull to raise. • Pull to raise. c00ic082a.eps c00ic082a.eps Boom Lift Control Boom Lift Control This lever raises or lowers digging boom. This lever raises or lowers digging boom. • Push to lower. • Push to lower.
PAGE 84
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT TRENCHER CONTROL DESCRIPTIONS TRENCHER CONTROL DESCRIPTIONS Cruise Control RPM Control Cruise Control RPM Control This optional control adjusts engine rpm. This optional control adjusts engine rpm. • Turn clockwise to increase engine rpm. This typically decreases ground speed temporarily. • Turn clockwise to increase engine rpm. This typically decreases ground speed temporarily.
PAGE 85
RT115 Tier 3 - TRENCHER ATTACHMENT 85 RT115 Tier 3 - TRENCHER ATTACHMENT SETUP SETUP SETUP SETUP Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. 85 Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. NOTICE: Use attachments or counterweights to make front and rear loads balance when all attachments are raised. Contact your Ditch Witch dealer about counterweighting for your equipment.
PAGE 86
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT SETUP EMERGENCY SHUTDOWN - Turn ignition switch to STOP. SETUP EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 1. Fasten and adjust seat belt. 1. Fasten and adjust seat belt. 2. Start tractor. See TRACTOR start-up procedures. 2. Start tractor. See TRACTOR start-up procedures. 3. Drive to starting point. Move in line with planned trench. See TRACTOR for operating procedures. 3. Drive to starting point.
PAGE 87
RT115 Tier 3 - TRENCHER ATTACHMENT 87 RT115 Tier 3 - TRENCHER ATTACHMENT OPERATION OPERATION OPERATION OPERATION Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. NOTICE: Cutting or drilling concrete containing sand or rock containing quartz may result in exposure to silica dust.
PAGE 88
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT OPERATION OPERATION Flying objects thrown by machine may strike people. Wear hard hat and safety glasses. Flying objects thrown by machine may strike people. Wear hard hat and safety glasses. Moving digging teeth will cause death or serious injury. Stay away. Moving digging teeth will cause death or serious injury. Stay away. NOTICE: NOTICE: • Ensure parking brake is engaged and parking brake indicator is on.
PAGE 89
RT115 Tier 3 - TRENCHER ATTACHMENT 89 RT115 Tier 3 - TRENCHER ATTACHMENT 89 OPERATION OPERATION 8. Move ground drive control to desired speed. 8. Move ground drive control to desired speed. 9. If using optional trench cleaner, return ground drive control to neutral when desired trench depth is reached. Raise boom slightly, then lower trench cleaner completely. This ensures trench cleaner will lock in place. 9.
PAGE 90
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT OPERATION Cruise Control Operation EMERGENCY SHUTDOWN - Turn ignition switch to STOP. OPERATION Cruise Control Operation EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 1. Ensure ground drive control is in neutral. 1. Ensure ground drive control is in neutral. 2. Ensure hydraulic motor switch is in low. 2. Ensure hydraulic motor switch is in low. 3. Ensure gearbox control is in 1 (low). 3.
PAGE 91
RT115 Tier 3 - TRENCHER ATTACHMENT 91 RT115 Tier 3 - TRENCHER ATTACHMENT 91 OPERATION OPERATION Backfilling Backfilling 1. Position unit at end of trench, several feet from spoils. Aim tractor at outer edge of spoils. 1. Position unit at end of trench, several feet from spoils. Aim tractor at outer edge of spoils. 2. Adjust backfill blade to fit land contour. 2. Adjust backfill blade to fit land contour. 3. Move outer edge of spoils toward trench.
PAGE 92
RT115 Tier 3- TRENCHER ATTACHMENT RT115 Tier 3 - TRENCHER ATTACHMENT OPERATING TIPS OPERATING TIPS OPERATING TIPS OPERATING TIPS • Avoid using badly worn teeth. When replacing teeth, maintain original pattern. Use Ditch Witch replacement teeth. • Avoid using badly worn teeth. When replacing teeth, maintain original pattern. Use Ditch Witch replacement teeth. • Operate engine at full throttle when working. • Operate engine at full throttle when working.
PAGE 93
RT115 Tier 3 - TRENCHER ATTACHMENT 93 RT115 Tier 3 - TRENCHER ATTACHMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT Chain Chain A variety of chains, teeth, and tooth patterns are available to provide efficient digging at any jobsite. For more information, contact your Ditch Witch dealer. A variety of chains, teeth, and tooth patterns are available to provide efficient digging at any jobsite. For more information, contact your Ditch Witch dealer.
PAGE 94
RT115 Tier 3- TRENCHER ATTACHMENT OPTIONAL EQUIPMENT RT115 Tier 3 - TRENCHER ATTACHMENT OPTIONAL EQUIPMENT
PAGE 95
RT115 Tier 3 - PLOW ATTACHMENT 95 RT115 Tier 3 - PLOW ATTACHMENT 95 PLOW CONTROLS OVERVIEW PLOW CONTROLS OVERVIEW PLOW ATTACHMENT PLOW CONTROLS OVERVIEW PLOW ATTACHMENT PLOW CONTROLS OVERVIEW 1. Plow swing control 1. Plow swing control 2. Blade position control 2. Blade position control 3. Plow lift control 3.
PAGE 96
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT PLOW CONTROL DESCRIPTIONS PLOW CONTROL DESCRIPTIONS PLOW CONTROL DESCRIPTIONS PLOW CONTROL DESCRIPTIONS Plow Swing Control Plow Swing Control This lever controls plow swing. This lever controls plow swing. • Pull to swing left. • Pull to swing left. • Push to swing right. • Push to swing right. • Push to end to float. • Push to end to float. ic0177h.eps ic0177h.
PAGE 97
RT115 Tier 3 - PLOW ATTACHMENT 97 RT115 Tier 3 - PLOW ATTACHMENT PLOW CONTROL DESCRIPTIONS PLOW CONTROL DESCRIPTIONS Plow Lift Control Plow Lift Control This lever controls plow lift. This lever controls plow lift. • Pull to raise plow. • Pull to raise plow. • Push to lower plow. • Push to lower plow. • Push to end to float. • Push to end to float. i 0180h i 0180h NOTICE: NOTICE: • If soil conditions allow, operate in float position.
PAGE 98
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT PLOW CONTROL DESCRIPTIONS PLOW CONTROL DESCRIPTIONS Reel Carrier Control Reel Carrier Control This optional switch controls reel carrier. This optional switch controls reel carrier. • Press top to raise. • Press top to raise. • Press bottom to lower. • Press bottom to lower. c00ic040a.eps NOTICE: Operate reel carrier in the lowest position possible for improved stability and visibility.
PAGE 99
RT115 Tier 3 - PLOW ATTACHMENT 99 RT115 Tier 3 - PLOW ATTACHMENT SETUP SETUP SETUP SETUP Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. NOTICE: NOTICE: • Plow will swing freely in float. • Plow will swing freely in float. • Keep everyone at least 6’ (2 m) from machine, attachments, and their range of movement.
PAGE 100
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT SETUP EMERGENCY SHUTDOWN - Turn ignition switch to STOP. SETUP EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 1. Fasten and adjust seat belt. 1. Fasten and adjust seat belt. 2. Start tractor. See TRACTOR for start-up procedures. 2. Start tractor. See TRACTOR for start-up procedures. 3. Drive to starting point. Move in line with planned trench. See TRACTOR for operating procedures. 3. Drive to starting point.
PAGE 101
RT115 Tier 3 - PLOW ATTACHMENT 101 RT115 Tier 3 - PLOW ATTACHMENT SETUP SETUP 8. Attach material being pulled or fed. 8. Attach material being pulled or fed. Pull: 101 Pull: • Insert material into pulling grip. • Insert material into pulling grip. • Tape grip with duct tape. • Tape grip with duct tape. Feed: Feed: • Remove cable guide. • Remove cable guide. • Feed cable through tube from top to bottom. • Feed cable through tube from top to bottom.
PAGE 102
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT OPERATION OPERATION OPERATION OPERATION Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Electrical shock. Contacting electrical lines will cause death or serious injury. Know location of lines and stay away. Electrical shock.
PAGE 103
RT115 Tier 3 - PLOW ATTACHMENT 103 OPERATION EMERGENCY SHUTDOWN - Turn ignition switch to STOP. RT115 Tier 3 - PLOW ATTACHMENT 103 OPERATION EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 1. Fasten and adjust seat belt. 1. Fasten and adjust seat belt. 2. Start tractor. 2. Start tractor. 3. Adjust throttle to low idle. 3. Adjust throttle to low idle. 4. Check that ground drive control is in neutral. 4. Check that ground drive control is in neutral. 5.
PAGE 104
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT OPERATION OPERATION 16. Move attachment speed/direction control to full speed forward. PLOW WILL VIBRATE. 16. Move attachment speed/direction control to full speed forward. PLOW WILL VIBRATE. 17. Reduce attachment speed to a point with the least tractor vibration and the highest ground drive speed possible without tire slippage. 17.
PAGE 105
RT115 Tier 3 - PLOW ATTACHMENT 105 RT115 Tier 3 - PLOW ATTACHMENT 105 OPERATING TIPS OPERATING TIPS OPERATING TIPS OPERATING TIPS • If ROPS-attached cable guide is used, it should be a genuine Ditch Witch cable guide manufactured for this purpose. • If ROPS-attached cable guide is used, it should be a genuine Ditch Witch cable guide manufactured for this purpose. • If material must be at a constant depth, dig starting and target trenches.
PAGE 106
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT OPERATING TIPS OPERATING TIPS Offset Plowing, Coordinated Plowing and Crabbing Offset Plowing, Coordinated Plowing and Crabbing Your Ditch Witch equipment allows you to plow four ways: normal plowing, offset plowing (1), coordinated plowing (2), and crabbing (3). Your Ditch Witch equipment allows you to plow four ways: normal plowing, offset plowing (1), coordinated plowing (2), and crabbing (3).
PAGE 107
RT115 Tier 3 - PLOW ATTACHMENT 107 RT115 Tier 3 - PLOW ATTACHMENT 107 OPERATING TIPS OPERATING TIPS To coordinate plow: To coordinate plow: Coordinated plowing can be used to turn a tight circle around a jobsite obstacle or in similar conditions. Coordinated plowing can be used to turn a tight circle around a jobsite obstacle or in similar conditions. 1. Move steer select control to coordinated position. 1. Move steer select control to coordinated position. 2. Slowly move tractor forward. 2.
PAGE 108
RT115 Tier 3- PLOW ATTACHMENT RT115 Tier 3 - PLOW ATTACHMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT Blades Blades Several blade lengths and types are available. See your authorized Ditch Witch dealer to select the blade right for your needs. Several blade lengths and types are available. See your authorized Ditch Witch dealer to select the blade right for your needs.
PAGE 109
RT115 Tier 3 - REEL WINDER ATTACHMENT 109 REEL WINDER CONTROLS OVERVIEW REEL WINDER ATTACHMENT REEL WINDER CONTROLS OVERVIEW RT115 Tier 3 - REEL WINDER ATTACHMENT 109 REEL WINDER CONTROLS OVERVIEW REEL WINDER ATTACHMENT REEL WINDER CONTROLS OVERVIEW 1. Reel winder selector switch 1. Reel winder selector switch 2. Reel winder control 2.
PAGE 110
RT115 Tier 3- REEL WINDER ATTACHMENT RT115 Tier 3 - REEL WINDER ATTACHMENT REEL WINDER CONTROL DESCRIPTIONS REEL WINDER CONTROL DESCRIPTIONS REEL WINDER CONTROL DESCRIPTIONS REEL WINDER CONTROL DESCRIPTIONS Reel Winder Selector Switch Reel Winder Selector Switch This switch selects reel winder function. This switch selects reel winder function. • Press right to activate reel winder controls. • Press right to activate reel winder controls. • Press left to activate backfill blade controls.
PAGE 111
RT115 Tier 3 - REEL WINDER ATTACHMENT 111 RT115 Tier 3 - REEL WINDER ATTACHMENT SETUP SETUP SETUP SETUP Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Adjust reel winder roller to rotate desired reel: Adjust reel winder roller to rotate desired reel: 1. Lower reel carrier. 1. Lower reel carrier. 2. Turn off engine. 2.
PAGE 112
RT115 Tier 3- REEL WINDER ATTACHMENT RT115 Tier 3 - REEL WINDER ATTACHMENT SETUP 4. Remove lever arm (3). SETUP 4. Remove lever arm (3). While supporting lever arm, remove bolt (1) that attaches hydraulic lift cylinder to lever arm. While supporting lever arm, remove bolt (1) that attaches hydraulic lift cylinder to lever arm.
PAGE 113
RT115 Tier 3 - REEL WINDER ATTACHMENT 113 RT115 Tier 3 - REEL WINDER ATTACHMENT 113 OPERATION OPERATION OPERATION OPERATION 1. Drive to beginning of planned plow path. 1. Drive to beginning of planned plow path. 2. Engage parking brake. 2. Engage parking brake. 3. Lower backfill blade. 3. Lower backfill blade. 4. Lower plow attachment. 4. Lower plow attachment. 5. Adjust throttle. 5. Adjust throttle. 6. Attach service line to reel. 6. Attach service line to reel. 7.
PAGE 114
RT115 Tier 3- REEL WINDER ATTACHMENT OPERATION RT115 Tier 3 - REEL WINDER ATTACHMENT OPERATION
PAGE 115
RT115 Tier 3 - SAW ATTACHMENT 115 RT115 Tier 3 - SAW ATTACHMENT SAW CONTROLS OVERVIEW SAW CONTROLS OVERVIEW SAW ATTACHMENT SAW CONTROLS OVERVIEW SAW ATTACHMENT SAW CONTROLS OVERVIEW 1. Cruise control selector* 3. Saw lift control 1. Cruise control selector* 3. Saw lift control 2. Stabilizer lift control 4. Cruise control RPM control* 2. Stabilizer lift control 4.
PAGE 116
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT SAW CONTROL DESCRIPTIONS SAW CONTROL DESCRIPTIONS SAW CONTROL DESCRIPTIONS SAW CONTROL DESCRIPTIONS Stabilizer Lift Control Stabilizer Lift Control This lever raises or lowers stabilizers. This lever raises or lowers stabilizers. • Push to lower. • Push to lower. • Pull to raise. • Pull to raise. Saw Lift Control Saw Lift Control This lever raises or lowers saw. This lever raises or lowers saw. • Push to lower.
PAGE 117
RT115 Tier 3 - SAW ATTACHMENT SAW CONTROL DESCRIPTIONS Cruise Control Selector Cruise Control Selector This optional switch activates the cruise control feature. This optional switch activates the cruise control feature. • Press right to turn on. • Press right to turn on. • Press left to turn off. • Press left to turn off. Only select cruise control when: 117 RT115 Tier 3 - SAW ATTACHMENT SAW CONTROL DESCRIPTIONS Only select cruise control when: c00ic055a.eps c00ic055a.
PAGE 118
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT SETUP SETUP SETUP SETUP EMERGENCY SHUTDOWN - Turn ignition switch to STOP. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. EMERGENCY SHUTDOWN - Turn ignition switch to STOP. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away.
PAGE 119
RT115 Tier 3 - SAW ATTACHMENT 119 RT115 Tier 3 - SAW ATTACHMENT SETUP SETUP Before First Use and After Replacing Bits Before First Use and After Replacing Bits NOTICE: NOTICE: • Unless otherwise instructed, all service should be performed with tractor off. • Unless otherwise instructed, all service should be performed with tractor off. • See weld notice at the end of this chapter. • See weld notice at the end of this chapter. 119 Check bit clearance. Check bit clearance. 1.
PAGE 120
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT SETUP SETUP Normal Use Normal Use 1. 1. Fasten and adjust seat belt. Fasten and adjust seat belt. 2. Start tractor. See TRACTOR start-up procedures. 2. Start tractor. See TRACTOR start-up procedures. 3. Drive to starting point. Move in line with planned trench. See TRACTOR for operating procedures. 3. Drive to starting point. Move in line with planned trench. See TRACTOR for operating procedures. 4.
PAGE 121
RT115 Tier 3 - SAW ATTACHMENT 121 RT115 Tier 3 - SAW ATTACHMENT OPERATION OPERATION OPERATION OPERATION 121 Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. NOTICE: Cutting or drilling concrete containing sand or rock containing quartz may result in exposure to silica dust.
PAGE 122
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT OPERATION OPERATION Flying objects thrown by machine may strike people. Wear hard hat and safety glasses. Flying objects thrown by machine may strike people. Wear hard hat and safety glasses. Moving digging teeth will kill you or cut off arm or leg. Stay away. Moving digging teeth will kill you or cut off arm or leg. Stay away. NOTICE: NOTICE: • Machine might jerk when digging starts.
PAGE 123
RT115 Tier 3 - SAW ATTACHMENT 123 RT115 Tier 3 - SAW ATTACHMENT OPERATION OPERATION 6. Push ground drive control forward to trenching speed. 6. Push ground drive control forward to trenching speed. 7. When trench is complete, adjust throttle to low idle. 7. When trench is complete, adjust throttle to low idle. 8. Raise saw and stabilizers. 8. Raise saw and stabilizers. As saw clears top of trench, move attachment speed/ direction control to neutral.
PAGE 124
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT OPERATION Cruise Control Operation EMERGENCY SHUTDOWN - Turn ignition switch to STOP. OPERATION Cruise Control Operation EMERGENCY SHUTDOWN - Turn ignition switch to STOP. 1. Ensure ground drive control is in neutral. 1. Ensure ground drive control is in neutral. 2. Ensure hydraulic motor switch is in low. 2. Ensure hydraulic motor switch is in low. 3. Ensure gearbox control is in 1 (low). 3. Ensure gearbox control is in 1 (low). 4.
PAGE 125
RT115 Tier 3 - SAW ATTACHMENT 125 RT115 Tier 3 - SAW ATTACHMENT 125 OPERATION OPERATION Backfilling Backfilling 1. Position unit at end of trench, several feet from spoils. Aim tractor at outer edge of spoils. 1. Position unit at end of trench, several feet from spoils. Aim tractor at outer edge of spoils. 2. Adjust backfill blade to fit land contour. 2. Adjust backfill blade to fit land contour. 3. Move outer edge of spoils toward trench.
PAGE 126
RT115 Tier 3- SAW ATTACHMENT RT115 Tier 3 - SAW ATTACHMENT OPERATING TIPS OPERATING TIPS OPERATING TIPS OPERATING TIPS • Work slowly and carefully. • Work slowly and carefully. • Wash bits and mounting blocks with high pressure water before parking unit overnight. • Wash bits and mounting blocks with high pressure water before parking unit overnight. • Before operating saw, check bits for free rotation. Tap bits lightly with a hammer and turn by hand.
PAGE 127
RT115 Tier 3 - SAW ATTACHMENT 127 RT115 Tier 3 - SAW ATTACHMENT 127 OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT Bits and Bit Holders Bits and Bit Holders Using worn bits and bit holders will reduce efficiency and damage equipment. Replacement bits and bit holders are available from your Ditch Witch dealer. Using worn bits and bit holders will reduce efficiency and damage equipment. Replacement bits and bit holders are available from your Ditch Witch dealer.
PAGE 128
RT115 Tier 3- SAW ATTACHMENT OPTIONAL EQUIPMENT RT115 Tier 3 - SAW ATTACHMENT OPTIONAL EQUIPMENT
PAGE 129
RT115 Tier 3 - BACKHOE ATTACHMENT 129 BACKHOE CONTROLS OVERVIEW BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT 129 BACKHOE CONTROLS OVERVIEW BACKHOE ATTACHMENT BACKHOE CONTROLS OVERVIEW BACKHOE CONTROLS OVERVIEW 1. Remote backfill blade control 1. Remote backfill blade control 2. Left stabilizer control 2. Left stabilizer control 3. Boom/swing control 3. Boom/swing control 4. Remote engine throttle control 4. Remote engine throttle control 5. Work light control 5.
PAGE 130
RT115 Tier 3- BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS Remote Backfill Blade Control Remote Backfill Blade Control This control raises or lowers backfill blade. This control raises or lowers backfill blade. • Pull to raise. • Pull to raise. • Push to lower. • Push to lower. c00ic033a.eps c00ic033a.
PAGE 131
RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS Boom/Swing Control Boom/Swing Control This control moves boom left or right and raises or lowers boom. This control moves boom left or right and raises or lowers boom. • Move left to swing left. • Move left to swing left. • Move right to swing right. • Move right to swing right. • Pull to raise. • Pull to raise. • Push to lower. • Push to lower. ic0042c.eps Control can perform more than one action at a time.
PAGE 132
RT115 Tier 3- BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS Remote Engine Throttle Control Remote Engine Throttle Control This control lever adjusts engine throttle. This control lever adjusts engine throttle. • Pull back to decrease engine speed. • Pull back to decrease engine speed. • Push forward to increase engine speed. • Push forward to increase engine speed.
PAGE 133
RT115 Tier 3 - BACKHOE ATTACHMENT 133 RT115 Tier 3 - BACKHOE ATTACHMENT 133 BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS Swing Lock Pin Swing Lock Pin This pin locks boom from swinging right or left during transport. This pin locks boom from swinging right or left during transport. To lock: To lock: • First engage stow lock. See “Stow Lock Control” later in this chapter. • First engage stow lock. See “Stow Lock Control” later in this chapter.
PAGE 134
RT115 Tier 3- BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS Remote Engine Stop Switch Remote Engine Stop Switch This control stops machine immediately. Return to idle before using stop switch except in emergency. This control stops machine immediately. Return to idle before using stop switch except in emergency. c00ic030a.eps c00ic030a.
PAGE 135
RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS Stow Lock Control Stow Lock Control This control locks boom during transport. This control locks boom during transport. To lock: To lock: • Raise boom fully. c00ic037a.eps 135 RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS • Raise boom fully. • Pull stow lock control handle back. c00ic037a.eps • Pull stow lock control handle back. • Lower boom slightly to to engage lock.
PAGE 136
RT115 Tier 3- BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT BACKHOE CONTROL DESCRIPTIONS BACKHOE CONTROL DESCRIPTIONS Remote Ground Drive Control Remote Ground Drive Control This control is used to move machine backward or forward while in backhoe operator station. This control is used to move machine backward or forward while in backhoe operator station. • Push handle for forward movement. • Push handle for forward movement. • Pull handle for reverse movement.
PAGE 137
RT115 Tier 3 - BACKHOE ATTACHMENT 137 RT115 Tier 3 - BACKHOE ATTACHMENT 137 SETUP SETUP SETUP SETUP 1. Move attachment speed/direction control to neutral position. 1. Move attachment speed/direction control to neutral position. 2. Apply service brake. 2. Apply service brake. 3. Move ground drive control to neutral position. 3. Move ground drive control to neutral position. 4. Shift gearbox control to 1 (low). 4. Shift gearbox control to 1 (low). 5.
PAGE 138
RT115 Tier 3- BACKHOE ATTACHMENT RT115 Tier 3 - BACKHOE ATTACHMENT OPERATION OPERATION OPERATION OPERATION 1. Use boom/swing control and bucket/dipper control to dig hole or trench. 1. Use boom/swing control and bucket/dipper control to dig hole or trench. • Keep dipper and boom at right angles as much as possible for maximum power. • Keep bucket in line with dipper as much as possible. • Position bucket so teeth cut soil. As soil is cut, curl bucket under dipper.
PAGE 139
RT115 Tier 3 - BACKHOE ATTACHMENT 139 RT115 Tier 3 - BACKHOE ATTACHMENT STOW STOW STOW STOW NOTICE: Before returning to tractor operator station: NOTICE: Before returning to tractor operator station: • raise stabilizers • raise stabilizers • return remote throttle to low idle • return remote throttle to low idle • stow and lock boom • stow and lock boom 1. When hole or trench is complete, lift boom while keeping dipper pointed at ground. 1.
PAGE 140
RT115 Tier 3- BACKHOE ATTACHMENT 140 RT115 Tier 3 - BACKHOE ATTACHMENT
PAGE 141
RT115 Tier 3 - DRILLING ATTACHMENT 141 DRILLING ATTACHMENT Turning shaft will kill you or crush arm or leg. Stay away. RT115 Tier 3 - DRILLING ATTACHMENT 141 DRILLING ATTACHMENT Turning shaft will kill you or crush arm or leg. Stay away. NOTICE: Keep everybody at least 10’ (3 m) away from drill pipe during operation. Do not straddle trench or drill pipe while drilling. NOTICE: Keep everybody at least 10’ (3 m) away from drill pipe during operation. Do not straddle trench or drill pipe while drilling.
PAGE 142
RT115 Tier 3- DRILLING ATTACHMENT RT115 Tier 3 - DRILLING ATTACHMENT DRILLING ATTACHMENT CONTROL DESCRIPTION DRILLING ATTACHMENT CONTROL DESCRIPTION DRILLING ATTACHMENT CONTROL DESCRIPTION DRILLING ATTACHMENT CONTROL DESCRIPTION Drilling Control Drilling Control This switch controls drill string rotation. This switch controls drill string rotation. • To rotate clockwise, press top. • To rotate clockwise, press top. • To rotate counterclockwise, press bottom.
PAGE 143
RT115 Tier 3 - DRILLING ATTACHMENT 143 RT115 Tier 3 - DRILLING ATTACHMENT PREPARE JOBSITE AND EQUIPMENT PREPARE JOBSITE AND EQUIPMENT PREPARE JOBSITE AND EQUIPMENT PREPARE JOBSITE AND EQUIPMENT 1 1 2 om0529h eps 2 om0529h eps Approach Trench (1) Approach Trench (1) 1. Mark path where you intend to drill. 1. Mark path where you intend to drill. 2. Dig an approach trench (1) along the intended bore path. 2. Dig an approach trench (1) along the intended bore path.
PAGE 144
RT115 Tier 3- DRILLING ATTACHMENT RT115 Tier 3 - DRILLING ATTACHMENT PREPARE JOBSITE AND EQUIPMENT Drill Pipe and Equipment om0540h.eps PREPARE JOBSITE AND EQUIPMENT Drill Pipe and Equipment om0540h.eps 1. Assemble at least 20’ (6 m), but not more than 30’ (9 m), of drill rod. 1. Assemble at least 20’ (6 m), but not more than 30’ (9 m), of drill rod. NOTICE: More than 10-15’ (3-4.5 m) of drill rod out of the trench increases the tendency of drill rod to bend. NOTICE: More than 10-15’ (3-4.
PAGE 145
RT115 Tier 3 - DRILLING ATTACHMENT 145 RT115 Tier 3 - DRILLING ATTACHMENT DRILL DRILL DRILL DRILL 145 EMERGENCY SHUTDOWN: Release drilling control and turn ignition switch to STOP. EMERGENCY SHUTDOWN: Release drilling control and turn ignition switch to STOP. 1. Start tractor’s engine and begin clockwise (forward) rotation. 1. Start tractor’s engine and begin clockwise (forward) rotation. 2. Slowly advance tractor while maintaining clockwise rotation. 2.
PAGE 146
RT115 Tier 3- DRILLING ATTACHMENT RT115 Tier 3 - DRILLING ATTACHMENT DRILL Using Drill String Guide DRILL Using Drill String Guide Turning shaft will kill you or crush arm or leg. Stay away. Turning shaft will kill you or crush arm or leg. Stay away. NOTICE: Keep everybody at least 10’ (3 m) away from drill rod during operation. Do not straddle trench or drill rod while drilling. NOTICE: Keep everybody at least 10’ (3 m) away from drill rod during operation.
PAGE 147
RT115 Tier 3 - DRILLING ATTACHMENT 147 RT115 Tier 3 - DRILLING ATTACHMENT 147 ADD ROD ADD ROD ADD ROD ADD ROD 1. Stop drilling attachment. 1. Stop drilling attachment. 2. Back up tractor 6" (150 mm) to loosen drill rod in ground. 2. Back up tractor 6" (150 mm) to loosen drill rod in ground. 3. Disconnect drill rod from drilling attachment. 3. Disconnect drill rod from drilling attachment. 4. Move tractor away from bore. 4. Move tractor away from bore. 5. Add one drill rod to continue bore.
PAGE 148
RT115 Tier 3- DRILLING ATTACHMENT RT115 Tier 3 - DRILLING ATTACHMENT DISASSEMBLE JOINTS DISASSEMBLE JOINTS DISASSEMBLE JOINTS DISASSEMBLE JOINTS 1. Press tab through hole in female side of joint using special tool or screwdriver. 1. Press tab through hole in female side of joint using special tool or screwdriver. 2. Pull rods apart. 2. Pull rods apart. OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT Drill Rod Drill Rod Bent or damaged drill rod might break when being pushed.
PAGE 149
RT115 Tier 3 - SERVICE 149 RT115 Tier 3 - SERVICE OPTIONAL EQUIPMENT OPTIONAL EQUIPMENT SERVICE SERVICE Proper lubrication and maintenance protects Ditch Witch equipment from damage and failure. In extreme conditions, service machine more frequently. Proper lubrication and maintenance protects Ditch Witch equipment from damage and failure. In extreme conditions, service machine more frequently. Use only recommended lubricants. Fill to capacities listed in SPECIFICATIONS.
PAGE 150
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE APPROVED COOLANT APPROVED COOLANT APPROVED COOLANT APPROVED COOLANT This unit was filled with John Deere Cool-Gard coolant before shipment from factory. Add only John Deere Cool-Gard (p/n 255006) or any fully-formulated, ethylene glycol based, low-silicate, heavy-duty diesel engine coolant meeting ASTM specification D5345 (prediluted) or D4985 (concentrate) and containing supplemental coolant additives (SCAs) meeting John Deere specification JDM H24A2.
PAGE 151
RT115 Tier 3 - SERVICE 151 RT115 Tier 3 - SERVICE Welding Precaution Welding Precaution Welding Precaution Welding Precaution 151 NOTICE: Welding can damage electronics. NOTICE: Welding can damage electronics. • Welding currents can damage electronic components. Always disconnect the ECU ground connection from the frame, harness connections to the ECU, and other electronic components prior to welding on machine or attachments.
PAGE 152
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE OVERVIEW OVERVIEW (DEO) diesel engine oil (MPL) 80W90 multipurpose lubricant (ATF) Automatic transmission fluid OVERVIEW (THF) Tractor hydraulic fluid Brake fluid (EPG) Extreme pressure grease (applies only to tractors equipped with powershift transmission) Change filter OVERVIEW (DEO) diesel engine oil (MPL) 80W90 multipurpose lubricant (ATF) Automatic transmission fluid (THF) Tractor hydraulic fluid Brake fluid (EPG) Extreme pressure grea
PAGE 153
RT115 Tier 3 - SERVICE 10 HOUR SERVICE 10 HOUR SERVICE 10 HOUR SERVICE TRACTOR Task Note Check engine oil DEO Task Note Check engine oil DEO Check air filter indicator and clean dust trap Check water separators and fuel filters Check water separators and fuel filters THF Check hydraulic fluid Check hydraulic reservoir fill and strainer Check hydraulic reservoir fill and strainer Check hydraulic hoses Check hydraulic hoses Check coolant level TRENCHER TRACTOR Check air filter ind
PAGE 154
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE PLOW Lube plow pivots EPG Check plow vibrator oil MPL PLOW Lube plow pivots EPG Check plow vibrator oil MPL Check plow arm pins and bushings Check plow arm pins and bushings Check plow connector pivots Check plow connector pivots Check attachment mounting bolts SAW 10 HOUR SERVICE 200 ft•lb (271 N•m) Clean saw Check attachment mounting bolts SAW Clean saw Clean spoil chutes Lube saw wheel shaft bearings 200 ft•lb (271
PAGE 155
RT115 Tier 3 - SERVICE 155 RT115 Tier 3 - SERVICE 155 10 HOUR SERVICE 10 HOUR SERVICE Check Air Filter Indicator and Clean Dust Trap Check Air Filter Indicator and Clean Dust Trap Check air filter indicator (1) and clean dust trap every 10 hours. Red band indicates filter must be changed. Push button (2) to reset indicator. Check air filter indicator (1) and clean dust trap every 10 hours. Red band indicates filter must be changed. Push button (2) to reset indicator.
PAGE 156
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Check Water Separators and Fuel Filters Check Water Separators and Fuel Filters Check water separators (1) and fuel filters (2) every 10 hours. Drain at plug as needed until water is removed and fuel runs from drain. Check water separators (1) and fuel filters (2) every 10 hours. Drain at plug as needed until water is removed and fuel runs from drain.
PAGE 157
RT115 Tier 3 - SERVICE 157 RT115 Tier 3 - SERVICE 157 10 HOUR SERVICE 10 HOUR SERVICE Check Hydraulic Reservoir Fill and Strainer Check Hydraulic Reservoir Fill and Strainer Check hydraulic reservoir fill and strainer on operator’s station step every 10 hours. Wipe away any dirt or debris. Check hydraulic reservoir fill and strainer on operator’s station step every 10 hours. Wipe away any dirt or debris.
PAGE 158
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE 10 HOUR SERVICE Check Hydraulic Hoses Check Hydraulic Hoses Check all hydraulic hoses every 10 hours. Check all hydraulic hoses every 10 hours. Fluid or air pressure could pierce skin and cause injury or death. Stay away. Fluid or air pressure could pierce skin and cause injury or death. Stay away. NOTICE: Escaping pressurized fluid can cause injury or pierce skin and poison.
PAGE 159
RT115 Tier 3 - SERVICE 159 RT115 Tier 3 - SERVICE 159 10 HOUR SERVICE 10 HOUR SERVICE Check Coolant Level Check Coolant Level With engine cool, check coolant level in auxiliary tank every 10 hours. If low, add approved coolant. Do not overfill. With engine cool, check coolant level in auxiliary tank every 10 hours. If low, add approved coolant. Do not overfill. IMPORTANT: See "Approved Coolants" earlier in this chapter for information on approved coolants.
PAGE 160
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Check Radiator Fins Check Radiator Fins Check radiator for dirt, grass, and other foreign matter every 10 hours. Clean out with compressed air or spray wash if required. Be careful not to damage fins with high pressure air or water. Check more often if operating in dusty or grassy conditions. Check radiator for dirt, grass, and other foreign matter every 10 hours. Clean out with compressed air or spray wash if required.
PAGE 161
RT115 Tier 3 - SERVICE 161 RT115 Tier 3 - SERVICE 161 10 HOUR SERVICE 10 HOUR SERVICE Check Wheel Lug Nuts Check Wheel Lug Nuts Check tightness of wheel lug nuts (1) every 10 hours. Tighten lugnuts to 295 ft•lb (400 N•m). Check tightness of wheel lug nuts (1) every 10 hours. Tighten lugnuts to 295 ft•lb (400 N•m). Trencher Trencher Lube Trencher Tail Roller Lube Trencher Tail Roller Wipe zerks clean and lube every 10 hours with EPG. Lube roller zerks on both sides of boom.
PAGE 162
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Lube Trencher Pivot Lube Trencher Pivot Wipe five zerks located on right of trencher pivot clean and lube every 10 hours with EPG. Wipe five zerks located on right of trencher pivot clean and lube every 10 hours with EPG. t03om106a.eps t03om106a.eps Wipe four zerks located on left of trencher pivot clean and lube every 10 hours with EPG.
PAGE 163
RT115 Tier 3 - SERVICE 163 RT115 Tier 3 - SERVICE 163 10 HOUR SERVICE 10 HOUR SERVICE Lube Trencher Auger Bearings Lube Trencher Auger Bearings Lube two auger bearing zerks (one on each side) every 10 hours with EPG. Lube two auger bearing zerks (one on each side) every 10 hours with EPG. Lube Trencher Auger Shaft Lube Trencher Auger Shaft Lube four auger shaft zerks (two on each side) every 10 hours with EPG. Lube four auger shaft zerks (two on each side) every 10 hours with EPG.
PAGE 164
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Check Trencher Auger Bolts Check Trencher Auger Bolts Check trencher auger bolts every 10 hours. For optimum spoils delivery, adjust augers to match terrain and digging depth. Check trencher auger bolts every 10 hours. For optimum spoils delivery, adjust augers to match terrain and digging depth. Check Digging Chain Teeth and Bits Check Digging Chain Teeth and Bits Check teeth for wear every 10 hours.
PAGE 165
RT115 Tier 3 - SERVICE 165 RT115 Tier 3 - SERVICE 165 10 HOUR SERVICE 10 HOUR SERVICE Check Digging Chain Check Digging Chain Check chain every 10 hours. Replace worn or broken chains. If sidebars are bent or loose on chain pins, chain spacers should be used to join sidebars. Check chain every 10 hours. Replace worn or broken chains. If sidebars are bent or loose on chain pins, chain spacers should be used to join sidebars.
PAGE 166
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE 10 HOUR SERVICE Check Attachment Mounting Bolts Check Attachment Mounting Bolts Check bolts every 10 hours and torque as necessary to keep bolts and other fasteners tight. Check for looseness or wear. Apply Loctite 271® adhesive. Check that bolts are torqued to 200 ft•lb (271 N•m). Check bolts every 10 hours and torque as necessary to keep bolts and other fasteners tight. Check for looseness or wear. Apply Loctite 271® adhesive.
PAGE 167
RT115 Tier 3 - SERVICE 167 RT115 Tier 3 - SERVICE 167 10 HOUR SERVICE 10 HOUR SERVICE Check Digging Chain Tension Check Digging Chain Tension Check digging chain tension every 10 hours. With boom horizontal, measure distance from bottom of boom to chain. When properly adjusted, distance should be 4.5 - 5.5" (114 - 140 mm). Check digging chain tension every 10 hours. With boom horizontal, measure distance from bottom of boom to chain. When properly adjusted, distance should be 4.5 - 5.
PAGE 168
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Plow Plow Lube Plow Pivots Lube Plow Pivots Lube pivots every 10 hours with EPG. Lube pivots every 10 hours with EPG. Check Plow Vibrator Oil Check Plow Vibrator Oil Check plow vibrator oil on each side of vibrator every 10 hours. With vibrator horizontal, oil should be halfway up sight glass (2). Add MPL as needed at fill (1). Check plow vibrator oil on each side of vibrator every 10 hours.
PAGE 169
RT115 Tier 3 - SERVICE 169 RT115 Tier 3 - SERVICE 169 10 HOUR SERVICE 10 HOUR SERVICE Check Plow Arm Pins and Bushings Check Plow Arm Pins and Bushings Check plow arm pins and bushings every 10 hours. Tighten as needed. Check plow arm pins and bushings every 10 hours. Tighten as needed. Check Plow Connector Pivots Check Plow Connector Pivots Visually check pivots every 10 hours for wear or damage. Visually check pivots every 10 hours for wear or damage.
PAGE 170
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Check Attachment Mounting Bolts Check Attachment Mounting Bolts Check mounting bolts every 10 hours and torque as necessary to keep bolts and other fasteners tight. Check for looseness or wear. Apply Loctite 271® adhesive. Check that bolts are torqued to 200 ft•lb (271 N•m). Check mounting bolts every 10 hours and torque as necessary to keep bolts and other fasteners tight. Check for looseness or wear.
PAGE 171
RT115 Tier 3 - SERVICE 171 RT115 Tier 3 - SERVICE 171 10 HOUR SERVICE 10 HOUR SERVICE Saw Saw Clean Saw Clean Saw Clean saw after each use. After using saw, clean tractor before performing routine lubrication and maintenance. Wash bits and mounting blocks with high pressure water. Clean saw after each use. After using saw, clean tractor before performing routine lubrication and maintenance. Wash bits and mounting blocks with high pressure water.
PAGE 172
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Lube Saw Wheel Shaft Bearings Lube Saw Wheel Shaft Bearings Lube saw wheel shaft bearings every 10 hours with EPG. Lube saw wheel shaft bearings every 10 hours with EPG. Check Saw Bits Check Saw Bits Check that saw bits rotate freely. Clean and check bits after each use. If bits are stuck, remove and clean packed soil from retaining ring. Check that saw bits rotate freely. Clean and check bits after each use.
PAGE 173
RT115 Tier 3 - SERVICE 173 RT115 Tier 3 - SERVICE 173 10 HOUR SERVICE 10 HOUR SERVICE Check Segments Check Segments Check saw segments every 10 hours. Replace as needed. Check saw segments every 10 hours. Replace as needed. Check Segment Bolts Check Segment Bolts Check segment bolts after first 10 hours of operation and then as needed. Torque to 700 ft•lb (950 N•m). Check segment bolts after first 10 hours of operation and then as needed. Torque to 700 ft•lb (950 N•m).
PAGE 174
RT115 Tier 3- SERVICE 10 HOUR SERVICE RT115 Tier 3 - SERVICE 10 HOUR SERVICE Check Attachment Mounting Bolts Check Attachment Mounting Bolts Check mounting bolts every 10 hours and tighten as necessary. Check for looseness or wear. Apply Loctite® 271 adhesive. Check that bolts are torqued to 200 ft•lb (271 N•m). Check mounting bolts every 10 hours and tighten as necessary. Check for looseness or wear. Apply Loctite® 271 adhesive. Check that bolts are torqued to 200 ft•lb (271 N•m).
PAGE 175
RT115 Tier 3 - SERVICE 50 HOUR SERVICE 50 HOUR SERVICE 50 HOUR SERVICE Task TRACTOR Note Check drive belt 175 RT115 Tier 3 - SERVICE 50 HOUR SERVICE Task TRACTOR Note Check drive belt Check hydraulic reservoir breather Check hydraulic reservoir breather Check fuel tank breather Check fuel tank breather Check cab air filter Check cab air filter TRENCHER Check trencher gearbox oil MPL TRENCHER Check trencher gearbox oil MPL PLOW Change plow vibrator oil (initial) MPL PLOW Cha
PAGE 176
RT115 Tier 3- SERVICE 50 HOUR SERVICE RT115 Tier 3 - SERVICE 50 HOUR SERVICE Check Hydraulic Reservoir Breather Check Hydraulic Reservoir Breather Check hydraulic reservoir breather every 50 hours. Ensure breather is not clogged. Remove dust around breather as needed by blowing with low-pressure air. When breather element becomes clogged, remove and clean or replace. Check hydraulic reservoir breather every 50 hours. Ensure breather is not clogged.
PAGE 177
RT115 Tier 3 - SERVICE 177 RT115 Tier 3 - SERVICE 177 50 HOUR SERVICE 50 HOUR SERVICE Check Cab Air Filter Check Cab Air Filter Check filter every 50 hours for wear or holes. Check more often if working in dusty conditions. Check filter every 50 hours for wear or holes. Check more often if working in dusty conditions. Trencher Trencher Check Trencher Gearbox Oil Check Trencher Gearbox Oil Check oil at sight tube every 50 hours. Keep oil level at horizontal line on housing.
PAGE 178
RT115 Tier 3- SERVICE 50 HOUR SERVICE RT115 Tier 3 - SERVICE 50 HOUR SERVICE Plow Plow Change Plow Vibrator Oil Change Plow Vibrator Oil Change plow vibrator oil after first 50 hours of operation. Change plow vibrator oil after first 50 hours of operation. Drain oil at drain plug (2). Replace plug and move plow vibrator to horizontal position. Fill with MPL at fill (1) until oil is halfway up sight glass (2). Refill capacity is 4 qt (3.8 L). Drain oil at drain plug (2).
PAGE 179
RT115 Tier 3 - SERVICE 100 HOUR SERVICE 100 HOUR SERVICE 100 HOUR SERVICE TRACTOR PLOW Task Note Check brake fluid BRAKE Change engine oil and filter (initial) DEO Check shear mounts 179 RT115 Tier 3 - SERVICE 100 HOUR SERVICE TRACTOR PLOW Test plow connector pivots Task Note Check brake fluid BRAKE Change engine oil and filter (initial) DEO Check shear mounts Test plow connector pivots Tractor Tractor Check Brake Fluid Check Brake Fluid Check brake fluid every 100 hours o
PAGE 180
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 100 HOUR SERVICE Change Engine Oil and Filter (Initial) 1 100 HOUR SERVICE Change Engine Oil and Filter (Initial) 1 2 3 2 3 t03om058a.eps t03om058a.eps Change engine oil and filter after first 100 hours of operation. Change engine oil and filter after first 100 hours of operation. To change: To change: • While oil is warm, remove drain plug (3). Drain oil and replace plug. • While oil is warm, remove drain plug (3).
PAGE 181
RT115 Tier 3 - SERVICE 181 RT115 Tier 3 - SERVICE 100 HOUR SERVICE 100 HOUR SERVICE Plow Plow Check Shear Mounts Check Shear Mounts Check shear mounts for wear every 100 hours. Replace as needed. Check shear mounts for wear every 100 hours. Replace as needed. IMPORTANT: When replacing shear mounts, it is important to compress the shear mounts with the washers to prevent the shear mount from tearing.
PAGE 182
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 100 HOUR SERVICE 100 HOUR SERVICE Test Plow Connector Pivots Test Plow Connector Pivots Test upper and lower connector pivots every 100 hours. Test upper and lower connector pivots every 100 hours. To test upper pivot: To test upper pivot: • Lower plow to ground. • Lower plow to ground. • Use plow lift control to put hydraulic load on pivot joints. Do not raise plow. • Use plow lift control to put hydraulic load on pivot joints.
PAGE 183
RT115 Tier 3 - SERVICE 250 HOUR SERVICE 250 HOUR SERVICE 250 HOUR SERVICE Task TRACTOR Note Adjust service brake 183 RT115 Tier 3 - SERVICE 250 HOUR SERVICE Task TRACTOR Note Adjust service brake Lube driveshaft U-joints EPG Lube driveshaft U-joints EPG Lube axle spindle pins EPG Lube axle spindle pins EPG Check ground drive gearbox oil MPL Check ground drive gearbox oil MPL Check differential oil MPL Check differential oil MPL Lube planetary wheel ends MPL Lube planetary
PAGE 184
RT115 Tier 3- SERVICE 250 HOUR SERVICE RT115 Tier 3 - SERVICE 250 HOUR SERVICE Lube Driveshaft U-joints Lube Driveshaft U-joints Lube driveshaft U-joints every 250 hours with 3-4 shots of EPG. Lube driveshaft U-joints every 250 hours with 3-4 shots of EPG. Lube Axle Spindle Pins Lube Axle Spindle Pins Lube axle spindle pins every 250 hours with 3-4 shots of EPG. Lube axle spindle pins every 250 hours with 3-4 shots of EPG.
PAGE 185
RT115 Tier 3 - SERVICE 185 RT115 Tier 3 - SERVICE 250 HOUR SERVICE 250 HOUR SERVICE Check Ground Drive Gearbox Oil Check Ground Drive Gearbox Oil 1 2 1 t03om068a.eps 2 t03om068a.eps Check oil level at fill (1) every 250 hours. Keep level at raised horizontal line on gearbox. Add MPL as needed. Check oil level at fill (1) every 250 hours. Keep level at raised horizontal line on gearbox. Add MPL as needed. Check Differential Oil Check Differential Oil 1 1 2 t03om069a.
PAGE 186
RT115 Tier 3- SERVICE 250 HOUR SERVICE Lube Planetary Wheel Ends RT115 Tier 3 - SERVICE 250 HOUR SERVICE Lube Planetary Wheel Ends t03om064a.eps t03om064a.eps Check oil level in planetary wheel ends every 250 hours. Add MPL as needed. Check oil level in planetary wheel ends every 250 hours. Add MPL as needed. Check ROPS Shock Mounts Check ROPS Shock Mounts t03om042h.eps Check ROPS shock mounts for wear or damage every 250 hours. Ensure that isolator irons do not make contact with frame.
PAGE 187
RT115 Tier 3 - SERVICE 187 RT115 Tier 3 - SERVICE 187 250 HOUR SERVICE 250 HOUR SERVICE Change Cab Air Filter Change Cab Air Filter Change filter every 250 hours. Change more often if working in dusty conditions. Change filter every 250 hours. Change more often if working in dusty conditions.
PAGE 188
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 500 HOUR SERVICE 500 HOUR SERVICE Task TRACTOR 500 HOUR SERVICE 500 HOUR SERVICE Note Change fuel filters Task TRACTOR Note Change fuel filters Change engine oil and filter DEO Change engine oil and filter DEO Change hydraulic fluid and filter THF Change hydraulic fluid and filter THF Check radiator SCA level PLOW Change plow vibrator oil COMBO Adjust headshaft bearing Check radiator SCA level MPL PLOW Change plow vibrator oil COMBO
PAGE 189
RT115 Tier 3 - SERVICE 500 HOUR SERVICE Change Engine Oil and Filter Change Engine Oil and Filter 1 189 RT115 Tier 3 - SERVICE 500 HOUR SERVICE 1 2 3 2 3 t03om058a.eps t03om058a.eps Regular engine oil and filter change interval is 500 hours only if using John Deere Plus-50® or ACEA E6/E7. Regular engine oil and filter change interval is 500 hours only if using John Deere Plus-50® or ACEA E6/E7. To change: To change: • While oil is warm, remove drain plug (3).
PAGE 190
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 500 HOUR SERVICE 500 HOUR SERVICE Change Hydraulic Fluid and Filter Change Hydraulic Fluid and Filter Change hydraulic fluid and filter every 500 hours. Change hydraulic fluid and filter every 250 hours if jobsite temperature exceeds 100°F (38°C) more than 50% of the time. Change hydraulic fluid and filter every 500 hours. Change hydraulic fluid and filter every 250 hours if jobsite temperature exceeds 100°F (38°C) more than 50% of the time.
PAGE 191
RT115 Tier 3 - SERVICE 191 RT115 Tier 3 - SERVICE 191 500 HOUR SERVICE 500 HOUR SERVICE Test Radiator SCA Level Test Radiator SCA Level Test SCA level every 500 hours using 3-Way Heavy Duty Coolant Test Kit (p/n 256-032). If SCA levels do not fall within appropriate range, replenish with a heavy-duty coolant conditioner such as John Deere coolant conditioner (p/n 256-033). Test SCA level every 500 hours using 3-Way Heavy Duty Coolant Test Kit (p/n 256-032).
PAGE 192
RT115 Tier 3- SERVICE 500 HOUR SERVICE RT115 Tier 3 - SERVICE 500 HOUR SERVICE Plow Plow Change Plow Vibrator Oil Change Plow Vibrator Oil Change plow vibrator oil every 500 hours. If normal operating temperature exceeds 100° F (38° C), change plow vibrator oil every 250 hours. Change plow vibrator oil every 500 hours. If normal operating temperature exceeds 100° F (38° C), change plow vibrator oil every 250 hours. Drain oil at drain plug (2).
PAGE 193
RT115 Tier 3 - SERVICE 193 RT115 Tier 3 - SERVICE 193 500 HOUR SERVICE 500 HOUR SERVICE Combo Combo Adjust Headshaft Bearing Adjust Headshaft Bearing Adjust headshaft bearing every 500 hours. Adjust headshaft bearing every 500 hours. To adjust: To adjust: 1. Remove cover. Remove bolts attaching trenching attachment motor to gearbox. 1. Remove cover. Remove bolts attaching trenching attachment motor to gearbox. 2. Remove bolt and washers in left end of headshaft. 2.
PAGE 194
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 1000 HOUR SERVICE 1000 HOUR SERVICE TRACTOR 1000 HOUR SERVICE 1000 HOUR SERVICE Task Note Task Note Change differential oil MPL Change differential oil MPL Change ground drive gearbox oil MPL Change ground drive gearbox oil MPL Change planetary wheel end oil MPL Change planetary wheel end oil MPL TRACTOR Adjust parking brake TRENCHER Change trencher gearbox oil Adjust parking brake MPL TRENCHER Change trencher gearbox oil Tractor
PAGE 195
RT115 Tier 3 - SERVICE 195 RT115 Tier 3 - SERVICE 1000 HOUR SERVICE 1000 HOUR SERVICE Change Ground Drive Gearbox Oil Change Ground Drive Gearbox Oil 1 2 1 2 t03om068a.eps Change ground drive gearbox oil every 1000 hours. Change ground drive gearbox oil every 1000 hours. To change: To change: • Remove drain plug (2). • Remove drain plug (2). • Drain oil and replace plug. • Drain oil and replace plug. • Fill gearbox with MPL at fill (1). • Fill gearbox with MPL at fill (1).
PAGE 196
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 1000 HOUR SERVICE Change Planetary Wheel End Oil 1000 HOUR SERVICE Change Planetary Wheel End Oil t03om064a.eps t03om064a.eps Change wheel end oil every 1000 hours. Change wheel end oil every 1000 hours. To change: To change: • Position wheel with plug at bottom. • Position wheel with plug at bottom. • Remove plug. • Remove plug. • Drain oil. • Drain oil. • Reposition wheel with plug at midway position.
PAGE 197
RT115 Tier 3 - SERVICE 197 RT115 Tier 3 - SERVICE 1000 HOUR SERVICE 1000 HOUR SERVICE Adjust Parking Brake Adjust Parking Brake t03om073a.eps 197 t03om073a.eps Adjust parking brake every 1000 hours. Adjust parking brake every 1000 hours. To adjust: To adjust: 1. Release parking brake. 1. Release parking brake. 2. Remove orange sleeve. 2. Remove orange sleeve. 3. Twist lever clockwise to tighten. 3. Twist lever clockwise to tighten. 4. Engage parking brake to test tension.
PAGE 198
RT115 Tier 3- SERVICE 1000 HOUR SERVICE RT115 Tier 3 - SERVICE 1000 HOUR SERVICE Trencher Trencher Change Trencher Gearbox Oil Change Trencher Gearbox Oil Change trencher gearbox oil every 1000 hours. Drain at plug. Replace drain plug and fill with MPL to lowest line on sight tube. Change trencher gearbox oil every 1000 hours. Drain at plug. Replace drain plug and fill with MPL to lowest line on sight tube.
PAGE 199
RT115 Tier 3 - SERVICE 199 RT115 Tier 3 - SERVICE 2000 HOUR SERVICE 2000 HOUR SERVICE 2000 HOUR SERVICE 2000 HOUR SERVICE TRACTOR Task Note Change engine coolant if proper SCA levels are not maintained when using Cool-Gard or if using approved coolant other than Cool-Gard; see "5000 Hour Service" if proper SCA levels are maintained when using Cool-Gard TRACTOR Task Note Change engine coolant if proper SCA levels are not maintained when using Cool-Gard or if using approved coolant other
PAGE 200
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 2000 HOUR SERVICE 2000 HOUR SERVICE NOTICE: NOTICE: • Coolant change interval depends on coolant used and whether SCA levels are properly maintained. Read note above carefully to ensure coolant is changed at the correct interval. • Coolant change interval depends on coolant used and whether SCA levels are properly maintained. Read note above carefully to ensure coolant is changed at the correct interval.
PAGE 201
RT115 Tier 3 - SERVICE 201 RT115 Tier 3 - SERVICE 5000 HOUR SERVICE 5000 HOUR SERVICE 5000 HOUR SERVICE 5000 HOUR SERVICE TRACTOR Task Note Change engine coolant if proper SCA levels are maintained when using Cool-Gard; see "2000 Hour Service" if proper SCA levels are not maintained when using Cool-Gard or if using approved coolant other than Cool-Gard TRACTOR Task Note Change engine coolant if proper SCA levels are maintained when using Cool-Gard; see "2000 Hour Service" if proper SCA
PAGE 202
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE 5000 HOUR SERVICE 5000 HOUR SERVICE NOTICE: NOTICE: • Coolant change interval depends on coolant used and whether SCA levels are properly maintained. Read note above carefully to ensure coolant is changed at the correct interval. • Coolant change interval depends on coolant used and whether SCA levels are properly maintained. Read note above carefully to ensure coolant is changed at the correct interval.
PAGE 203
RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED AS NEEDED Task Note Task TRACTOR Clean radiator fins TRACTOR Clean radiator fins TRENCHER Replace digging chain TRENCHER Replace digging chain PLOW Clean feed tube PLOW Clean feed tube Replace sod cutter and blade Check plow blade bolts SAW 210 ft•lb (285 N•m) Check plow blade bolts SAW Replace saw segments 210 ft•lb (285 N•m) Replace saw bits Replace saw segments 700 ft•lb (950 N•m) Check saw segment bolts Hard surface saw segments
PAGE 204
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Trencher Trencher Replace Digging Chain Replace Digging Chain Visually check digging chains for wear on rollers and sidebars. Check pins and bushing wear by measuring distance between chain pins and comparing it with a new chain. Visually check digging chains for wear on rollers and sidebars. Check pins and bushing wear by measuring distance between chain pins and comparing it with a new chain.
PAGE 205
RT115 Tier 3 - SERVICE AS NEEDED 7. Secure chain by clamping links on either side of connector pin with chain jaws. Squeeze jaws to reduce pressure on connector pin. 7. Secure chain by clamping links on either side of connector pin with chain jaws. Squeeze jaws to reduce pressure on connector pin. om1752x 8. Loop cable through links nearest connector pin. 205 RT115 Tier 3 - SERVICE AS NEEDED om1752x 8. Loop cable through links nearest connector pin.
PAGE 206
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. 11. Unclamp links. Slowly release cable and lower chain to ground. 11. Unclamp links. Slowly release cable and lower chain to ground. 12. Lay chain on ground with teeth down. 12. Lay chain on ground with teeth down.
PAGE 207
RT115 Tier 3 - SERVICE 207 RT115 Tier 3 - SERVICE 207 AS NEEDED AS NEEDED 15. Tighten chain by pumping EPG into grease cylinder. 15. Tighten chain by pumping EPG into grease cylinder. Time Augers Time Augers Ensure that augers are balanced, as shown. If auger timing is off, unit will bounce from side to side even in normal digging conditions. Ensure that augers are balanced, as shown. If auger timing is off, unit will bounce from side to side even in normal digging conditions.
PAGE 208
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Plow Plow Clean Feed Tube Clean Feed Tube Clean feed tube as needed. Clean feed tube as needed. Replace Sod Cutter and Blade Replace Sod Cutter and Blade Replace worn sod cutter and plow blade as needed. Replace worn sod cutter and plow blade as needed.
PAGE 209
RT115 Tier 3 - SERVICE 209 RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Check Plow Blade Bolts Check Plow Blade Bolts t03om041h.eps t03om041h.eps Check plow blade bolts as needed. If loose, use Loctite® 242 (blue) and torque bolts to 210 ft•lb (285 N•m). Check plow blade bolts as needed. If loose, use Loctite® 242 (blue) and torque bolts to 210 ft•lb (285 N•m). Saw Saw Replace Saw Bits Replace Saw Bits Replace bit when carbide cap or insert is worn or adapter can be damaged.
PAGE 210
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Replace Saw Segments Replace Saw Segments Replace worn segments as needed. Replace worn segments as needed. To repair, clamp jig to block and weld block to the segment with E7018 or equivalent. To repair, clamp jig to block and weld block to the segment with E7018 or equivalent. NOTICE: Welding can damage electronics. NOTICE: Welding can damage electronics. • Welding currents can damage electronic components.
PAGE 211
RT115 Tier 3 - SERVICE 211 RT115 Tier 3 - SERVICE 211 AS NEEDED AS NEEDED Check Saw Segment Bolts Check Saw Segment Bolts Check segment bolts after first 10 hours of operation and then as needed. Torque to 700 ft•lb (950 N•m). Check segment bolts after first 10 hours of operation and then as needed. Torque to 700 ft•lb (950 N•m).
PAGE 212
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED TIER 3 SERVICE OVERVIEW TIER 3 SERVICE OVERVIEW Tier 3 is a computer-controlled fuel management system. A variety of sensors send input data to an ECU (Electronic Control Unit) that compares inputs with pre-programed memory and sends output voltage to a variety of actuators to adjust and operate the engine within specified parameters. Tier 3 is a computer-controlled fuel management system.
PAGE 213
RT115 Tier 3 - SERVICE 213 RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Operator Alert Indicator Operator Alert Indicator When a non-critical engine fault occurs, the operator alert indicator on the gauge cluster will light. A fault code will be stored in the diagnostic gauge. When a non-critical engine fault occurs, the operator alert indicator on the gauge cluster will light. A fault code will be stored in the diagnostic gauge.
PAGE 214
RT115 Tier 3- SERVICE AS NEEDED RT115 Tier 3 - SERVICE AS NEEDED To clear active codes: To clear active codes: 1. Turn ignition switch to STOP. 1. Turn ignition switch to STOP. 2. Turn ignition switch back to START. 2. Turn ignition switch back to START. To change display options: To change display options: 1. Turn the ignition switch to STOP. 1. Turn the ignition switch to STOP. 2. Press and hold the selection switch. 2. Press and hold the selection switch. 3.
PAGE 215
RT115 Tier 3 - SERVICE 215 RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Engine Diagnostic Codes Engine Diagnostic Codes To read a step-by-step troubleshooting sequence for each code, see repair guide. To read a step-by-step troubleshooting sequence for each code, see repair guide.
PAGE 216
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Two-line diagnostic code Definition Possible cause Two-line diagnostic code Definition Possible cause SPN 110, FMI 0 engine coolant temp extremely high coolant temp sensor (R3) SPN 110, FMI 0 engine coolant temp extremely high coolant temp sensor (R3) SPN 110, FMI 3 engine coolant temp input voltage high coolant temp sensor (R3) SPN 110, FMI 3 engine coolant temp input voltage high coolant temp sensor (R3) SPN 110, F
PAGE 217
RT115 Tier 3 - SERVICE 217 RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Two-line diagnostic code Definition Possible cause Two-line diagnostic code Definition Possible cause SPN 620, FMI 3 sensor supply voltage high wire 17 BLU/ GRN, ECU (U1) SPN 620, FMI 3 sensor supply voltage high wire 17 BLU/ GRN, ECU (U1) SPN 620, FMI 4 sensor supply voltage low wire 17 BLU/ GRN, ECU (U1) SPN 620, FMI 4 sensor supply voltage low wire 17 BLU/ GRN, ECU (U1) SPN 627, FMI 1 all injector currents l
PAGE 218
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Two-line diagnostic code Definition Possible cause Two-line diagnostic code Definition Possible cause SPN 639, FMI 13 CAN error ECU (U1), diagnostic gauge (M1), wiring connections SPN 639, FMI 13 CAN error ECU (U1), diagnostic gauge (M1), wiring connections SPN 651, FMI 5 injector #1circuit has high resistance SPN 651, FMI 5 injector #1circuit has high resistance SPN 651, FMI 6 injector #1circuit has low resistance c
PAGE 219
RT115 Tier 3 - SERVICE 219 RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Two-line diagnostic code Definition Possible cause Two-line diagnostic code Definition Possible cause SPN 654, FMI 7 injector #4 not responding check injector and flow limiter SPN 654, FMI 7 injector #4 not responding check injector and flow limiter SPN 655, FMI 5 injector #5 circuit has high resistance SPN 655, FMI 5 injector #5 circuit has high resistance SPN 655, FMI 6 injector #5 circuit has low resistance c
PAGE 220
RT115 Tier 3- SERVICE RT115 Tier 3 - SERVICE AS NEEDED AS NEEDED Two-line diagnostic code Definition Possible cause Two-line diagnostic code Definition Possible cause SPN 1079, FMI 3 sensor supply voltage high wire 17 BLU/ GRN, ECU (U1) SPN 1079, FMI 3 sensor supply voltage high wire 17 BLU/ GRN, ECU (U1) SPN 1079, FMI 4 sensor supply voltage low ECU (U1), wiring SPN 1079, FMI 4 sensor supply voltage low ECU (U1), wiring SPN 1080, FMI 3 fuel rail pressure sensor supply voltage hi
PAGE 221
RT115 Tier 3 - SPECIFICATIONS SPECIFICATIONS RT115 TIER 3 TRACTOR Dimensions 221 RT115 Tier 3 - SPECIFICATIONS RT115 TIER 3 TRACTOR RT115 TIER 3 TRACTOR SPECIFICATIONS RT115 TIER 3 TRACTOR U.S. Metric Dimensions U.S. Metric A2 Angle of approach 25° 25° A2 Angle of approach 25° 25° H1 Height 111 in 2.8 m H1 Height 111 in 2.8 m L1 Nose to rear mount length 128 in 3.2 m L1 Nose to rear mount length 128 in 3.2 m L2 Length - transport 148 in 3.
PAGE 222
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS RT115 TIER 3 TRACTOR Operation U.S. Metric Forward speeds RT115 TIER 3 TRACTOR Operation U.S. Metric Forward speeds Low/Low 0.6 mph 0.9 km/h Low/Low 0.6 mph 0.9 km/h Low/High 1.3 mph 2.0 km/h Low/High 1.3 mph 2.0 km/h High/Low 4.4 mph 7.0 km/h High/Low 4.4 mph 7.0 km/h High/High 9.4 mph 15.1 km/h High/High 9.4 mph 15.1 km/h Reverse speeds Reverse speeds Low/Low 0.3 mph 0.5 km/h Low/Low 0.3 mph 0.
PAGE 223
RT115 Tier 3 - SPECIFICATIONS Power Plant 223 RT115 Tier 3 - SPECIFICATIONS RT115 TIER 3 TRACTOR RT115 TIER 3 TRACTOR U.S. Metric Engine: John Deere 4045HF285, turbocharged, diesel Power Plant U.S. Metric Engine: John Deere 4045HF285, turbocharged, diesel Displacement 276 in3 4.5 L Displacement 276 in3 4.5 L Bore 4.19 in 106 mm Bore 4.19 in 106 mm Stroke 5.00 in 127 mm Stroke 5.
PAGE 224
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS RT115 TIER 3 TRACTOR RT115 TIER 3 TRACTOR Hydraulic System U.S. Metric Hydraulic System U.S. Metric Ground drive pump capacity at 2400 rpm 30.4 gpm 115 L/min Ground drive pump capacity at 2400 rpm 30.
PAGE 225
RT115 Tier 3 - SPECIFICATIONS 225 RT115 TIER 3 TRACTOR RT115 Tier 3 - SPECIFICATIONS 225 RT115 TIER 3 TRACTOR Noise Levels Noise Levels Operator 96 dBA sound pressure per ISO 6394 Operator 96 dBA sound pressure per ISO 6394 Exterior 112 dBA sound power per ISO 6393. Exterior 112 dBA sound power per ISO 6393. Unless otherwise specified, all figures are for standard equipment only. Unless otherwise specified, all figures are for standard equipment only.
PAGE 226
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H910 TRENCHER H910 TRENCHER Dimensions H910 TRENCHER H910 TRENCHER U.S. Metric Dimensions U.S. Metric A3 Angle of departure 28° 28° A3 Angle of departure 28° 28° A Trench depth, maximum 97 in 2.46 m A Trench depth, maximum 97 in 2.
PAGE 227
RT115 Tier 3 - SPECIFICATIONS Operation 227 RT115 Tier 3 - SPECIFICATIONS H910 TRENCHER H910 TRENCHER U.S. Metric Headshaft speeds @ 2500 engine rpm Operation U.S.
PAGE 228
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H911 TRENCHER H911 TRENCHER Dimensions H911 TRENCHER H911 TRENCHER U.S. Metric Dimensions U.S. Metric A3 Angle of departure 25° 25° A3 Angle of departure 25° 25° A Trench depth, maximum 94 in 2.39 m A Trench depth, maximum 94 in 2.
PAGE 229
RT115 Tier 3 - SPECIFICATIONS Operation 229 RT115 Tier 3 - SPECIFICATIONS H911 TRENCHER H911 TRENCHER U.S. Metric Headshaft speeds @ 2500 engine rpm Operation U.S.
PAGE 230
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H932 PLOW H932 PLOW Dimensions H932 PLOW H932 PLOW U.S. Metric Dimensions U.S.
PAGE 231
RT115 Tier 3 - SPECIFICATIONS 231 RT115 Tier 3 - SPECIFICATIONS H932 PLOW H932 PLOW Operation U.S. Metric Operation U.S. Metric Plow vibrator force @ 1800 rpm 35,215 lb 157 kN Plow vibrator force @ 1800 rpm 35,215 lb 157 kN Maximum material diameter Maximum material diameter Pulled 3 in 80 mm Pulled 3 in 80 mm Fed 2 in 50 mm Fed 2 in 50 mm General U.S. Metric General U.S.
PAGE 232
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H952 COMBO H952 COMBO H952 COMBO H952 COMBO Trencher Trencher Dimensions U.S. Metric Dimensions U.S. Metric A Trench depth, maximum 70 in 1.8 m A Trench depth, maximum 70 in 1.
PAGE 233
RT115 Tier 3 - SPECIFICATIONS Operation 233 RT115 Tier 3 - SPECIFICATIONS H952 COMBO H952 COMBO U.S. Metric Maximum headshaft speed Operation U.S.
PAGE 234
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H952 COMBO Plow H952 COMBO Plow Dimensions U.S. Metric Dimensions U.S.
PAGE 235
RT115 Tier 3 - SPECIFICATIONS 235 RT115 Tier 3 - SPECIFICATIONS H952 COMBO H952 COMBO Operation U.S. Metric Operation U.S. Metric Plow vibrator force @ 1800 rpm 35,215 lb 156 644 kN Plow vibrator force @ 1800 rpm 35,215 lb 156 644 kN Maximum material diameter Maximum material diameter Pulled 3 in 80 mm Pulled 3 in 80 mm Fed 2 in 50 mm Fed 2 in 50 mm General U.S. Metric General U.S.
PAGE 236
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS H1140 SAW H1140 SAW H1140 SAW H1140 SAW Dimensions U.S. Metric Dimensions U.S. Metric A Trench depth 40 in 1m A Trench depth 40 in 1m Trench width 4.5, 6 in 115, 150 mm Trench width 4.5, 6 in 115, 150 mm Transport height - attachment 130 in 3.3 m Transport height - attachment 130 in 3.3 m Height - wheel on ground 102 in 2.6 m Height - wheel on ground 102 in 2.
PAGE 237
RT115 Tier 3 - SPECIFICATIONS 237 RT115 Tier 3 - SPECIFICATIONS H1140 SAW H1140 SAW Operation U.S. Metric Operation U.S. Metric Maximum breakover angle at full depth 17° 17° Maximum breakover angle at full depth 17° 17° Quantity of cutting teeth on wheel (4.5", 6") 70, 80 70, 80 Quantity of cutting teeth on wheel (4.5", 6") 70, 80 70, 80 Counterweight required. Contact your local Ditch Witch dealer for counterweight requirements. Counterweight required.
PAGE 238
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS A720 BACKHOE A720 BACKHOE A720 BACKHOE A720 BACKHOE Dimensions U.S. Metric Dimensions U.S. Metric A Transport height 111 in 2.8 m A Transport height 111 in 2.8 m C Ground clearance 27 in 690 mm C Ground clearance 27 in 690 mm D Backhoe length, stowed 122 in 3.1 m D Backhoe length, stowed 122 in 3.1 m F Digging depth, max. 92 in 2.3 m F Digging depth, max. 92 in 2.3 m G Digging depth, 2 ft (0.
PAGE 239
RT115 Tier 3 - SPECIFICATIONS General 239 RT115 Tier 3 - SPECIFICATIONS A720 BACKHOE A720 BACKHOE U.S. Metric Bucket General U.S. Metric Bucket Width 12-24 in 305-610 mm Width 12-24 in 305-610 mm Capacity 1.7-3.5 ft3 0.05-.1m3 Capacity 1.7-3.5 ft3 0.05-.
PAGE 240
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS A920 BACKHOE A920 BACKHOE A920 BACKHOE A920 BACKHOE DIMENSIONAL U.S. Metric DIMENSIONAL U.S. Metric A Transport height 118 in 3.0 m A Transport height 118 in 3.0 m C Ground clearance 29 in 740 mm C Ground clearance 29 in 740 mm D Backhoe length, stowed 117 in 2.9 m D Backhoe length, stowed 117 in 2.9 m F Digging depth, max. 112 in 2.8 m F Digging depth, max. 112 in 2.8 m G Digging depth, 2 ft (0.
PAGE 241
RT115 Tier 3 - SPECIFICATIONS General 241 RT115 Tier 3 - SPECIFICATIONS A920 BACKHOE A920 BACKHOE U.S. Metric Bucket General U.S. Metric Bucket Width 12-24 in 305-610 mm Width 12-24 in 305-610 mm Capacity 1.7-3.5 ft3 0.05-.1 m3 Capacity 1.7-3.5 ft3 0.05-.
PAGE 242
RT115 Tier 3- SPECIFICATIONS RT115 Tier 3 - SPECIFICATIONS RC115 REEL CARRIER RC115 REEL CARRIER RC115 REEL CARRIER RC115 REEL CARRIER Dimensions U.S. Metric Dimensions U.S. Metric L5 Distance from backfill blade to outside edge of reel carrier with maximum diameter reel 76 in 1.9 m L5 Distance from backfill blade to outside edge of reel carrier with maximum diameter reel 76 in 1.9 m N Maximum reel diameter 84 in 2.1 m N Maximum reel diameter 84 in 2.
PAGE 243
RT115 Tier 3 - SPECIFICATIONS RC115 Counterweight Requirements RT115 with H932 plow RT115 with H952 combo 243 RT115 Tier 3 - SPECIFICATIONS RC115 REEL CARRIER RC115 REEL CARRIER RC115 Counterweight Requirements Reel weight Back axle* Front RC weight Rear weight 0-1500 lb (0-680 kg) 800 lb (363 kg) 600 lb (272 kg) 1000 lb (454 kg) 1500-2500 lb (680-1134 kg) 800 lb (363 kg) 0 lb (0 kg) 1000 lb (454 kg) 0-1500 lb (0-680 kg) 800 lb (363 kg) 600 lb (272 kg) 0 lb (0 kg) 1500-2500 lb (
PAGE 244
RT115 Tier 3- SPECIFICATIONS RC115 REEL CARRIER RT115 Tier 3 - SPECIFICATIONS RC115 REEL CARRIER
PAGE 245
RT115 Tier 3 - WARRANTY 245 RT115 Tier 3 - WARRANTY WARRANTY WARRANTY Ditch Witch Equipment and Parts Limited Warranty Policy Ditch Witch Equipment and Parts Limited Warranty Policy Subject to the limitations and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by The Charles Machine Works, Inc.
PAGE 246
RT115 Tier 3- WARRANTY 246 Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions.
PAGE 247
RT115 Tier 3 - WARRANTY 247 RT115 Tier 3 - WARRANTY 247
PAGE 248
RT115 Tier 3- WARRANTY 248 RT115 Tier 3 - WARRANTY
PAGE 249
RT115 Tier 3 - 249 RT115 Tier 3 - 249
PAGE 250
RT115 Tier 3- 250 RT115 Tier 3 -
PAGE 251
PAGE 252