Manual

RT115 Tier 3- DRILLING ATTACHMENT
DRILLING ATTACHMENT CONTROL DESCRIPTION
142 RT115 Tier 3 - DRILLING ATTACHMENT
DRILLING ATTACHMENT CONTROL DESCRIPTION
DRILLING ATTACHMENT CONTROL
DESCRIPTION
Drilling Control
This switch controls drill string
rotation.
• To rotate clockwise, press top.
• To rotate counterclockwise,
press bottom.
IMPORTANT: Always
rotate clockwise during
drilling and backreaming.
Rotate counterclockwise
only to dislodge a dry
bore bit or reamer that
has siezed in the bore
hole.
IMPORTANT:
• This switch is spring-loaded and will automatically stop the
drilling attachment when released.
• If using only remote handle, switch will not be mounted on
dash.
c00ic084a.eps
DRILLING ATTACHMENT CONTROL
DESCRIPTION
Drilling Control
This switch controls drill string
rotation.
• To rotate clockwise, press top.
• To rotate counterclockwise,
press bottom.
IMPORTANT: Always
rotate clockwise during
drilling and backreaming.
Rotate counterclockwise
only to dislodge a dry
bore bit or reamer that
has siezed in the bore
hole.
IMPORTANT:
• This switch is spring-loaded and will automatically stop the
drilling attachment when released.
• If using only remote handle, switch will not be mounted on
dash.
c00ic084a.eps