User guide

RT45 Operator’s Manual Systems and Equipment - 131
Counterweighting
CMW
®
H342 Saw
A323 Backhoe
MT12 MicroTrencher
Counterweighting
Equipment Description
bits and bit holders replace as needed to increase efficiency and keep from damaging machine
block repair jigs use to repair worn or damaged blocks or plates housing the bit holder; use
block repair jig available from your Ditch Witch
®
dealer and an E7018 or
equivalent
IMPORTANT: A322 backhoe is not configured for the RT45 Tier 4.
Equipment Description
bucket and bucket teeth replace as needed to increase efficiency and keep from damaging machine
remote crowd use to creep tractor forward during digging
light kit illuminates the backhoe work area
Equipment Description
bits and bit holders replace as needed to increase efficiency and keep from damaging machine
blades provides options for cutting trenches 0.75” (19 mm), 0.95” (24 mm), or 1.25”
(32 mm) wide
vacuum kit use to connect vacuum hose on trencher to hose on vacuum excavation unit;
includes hose guides that mount to side of tractor
Attachment Counterweight required
H313 trencher four front counterweights or 200 lb (91 kg) TBS and wheel weights on each
front tire
H314 trencher eight front counterweights
H332 plow
contact Ditch Witch
®
dealer for correct counterweighting
H342 saw
contact Ditch Witch dealer for correct counterweighting
H350 combo
contact Ditch Witch dealer for correct counterweighting
MT12 MicroTrencher
contact Ditch Witch dealer for correct counterweighting