User guide

RT45 Operator’s Manual Operation Overview - 63
Sawing
CMW
®
Sawing
1. Start unit. See page 72.
2. Position tractor and controls. See page 96.
3. Begin sawing. See page 98.
4. Complete the installation. See page 99.
5. Backfill the trench. See page 136.
6. Shut down tractor. See page 74.
Drilling
1. Start unit. See page 72.
2. Dig approach trench and target trench. See page 109.
3. Assemble drill string and position tractor. See page 110.
4. Begin drilling. See page 111.
5. Use drill string guide as needed. See page 112.
6. Add rod. See page 113.
7. Backream. See page 113.
8. Shut down tractor. See page 74.
9. Disassemble joints. See page 114.