Spec Sheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1
-800-753-2345 Direct: 727-812-5000
Technical Support: 1
-888-472-6100
www.dite
ksurgeprotection.com
Doc. Number: SPS-100001-001 Rev 12 10/20
©20
20 DITEK Corp.
Page 1 of 1
Technical Specifications
Part Number: DTK-1F DTK-1FF
Service Voltage: 110-120VAC
MCOV: 127VAC (Power & Telco)
Protection Modes:
L-G, L-N, N-G (AC)
Tip-G, Ring-G, Tip-Ring (Telco)
Voltage Protection Rating: 500V
Surge Current Rating:
40,000A
30,000A
Max Continuous Current: 15A (AC) 125mA (Telco)
Mechanical Characteristics
Connection Method: Direct plug-in(AC) RJ11/14(1FF)
Housing: ABS
Operating Temperature: 0°C - 40°C (32°F - 104°F)
Dimensions:
2.71”L x 1.25”W x 1.385”H
(69mm x 32mm x 47mm)
Weight: 0.25 lb (113g)
Quality, Standards & Approval
Agency Approvals: UL1449
Warranty: Ten Year Limited Warranty
DITEK’s DTK-1F Series single outlet surge protectors provide
robust surge protection at a reasonable cost. The unique center
screw design that secures the surge protector and, if installed, a
transformer, to the wall prevents accidental disconnections.
Models are available to protect AC power and telephone lines.
Applications

Alarm Panel Transformers

Point of Use Appliances

Answering Machines

Fax Machines
Product
Features

Single AC outlet protects critical equipment

Center screw secures to outlet and can also
secure a connected transformer

Diagnostic LED indicates AC power, ground
presence and suppressor function

AC protection – 40,000A: DTK-1

AC and Telco protection: DTK-1FF
DTK-1F
DTK-1FF