Data Sheet

54kA Series Connected Surge Protector
General Product Specifications
DTK-120SR
DTK-120SR
Product Features
• Series design for fast response and
best protection
• Compact design fits in a variety of
control panels
• Suitable for use on circuit breakers
rated at 10kA AIC
• Multi-stage hybrid circuit design
• EMI/RFI filtering
• LED indicates protection status
• UL1449 3
rd
Edition Recognized
component
• Ten Year Limited Warranty
One DITEK Center
1720 Starkey Road
Largo, FL 33771
Document: SPS-100007-002 Rev 5 02/11
©2011 DITEK Corp.
Specification Subject to Change
DITEK’s DTK-120SR protects 120V power on electrical circuits and control panels. The hybrid
series design provides maximum critical load protection, with EMI/RFI filtering. The 120SR is
ideal for use in UL Listed control panels where a UL Recognized Component is required for
control panel certification.
Use DITEK’s DTK-TSS4 when a UL Listed series surge protector is required.
1-800-753-2345 Direct 1-727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Specifications
Agency Approvals: UL1449 3
rd
Edition, cUL, UL1283
Protector Type:
Type 2 Component Assembly for use in Type 2 Applications
Nominal Discharge Current Rating (In): 3kA
SCCR: 10kA
Operating Voltage: 120VAC
MCOV: 150VAC
Peak Surge Current: 54,000 Amps
Maximum Continuous Current: 20A
EMI/RFI Attenuation: Up to 35dB, 100kHz-100MHz
Protection Modes: All modes (L-N, L-G, N-G)
Voltage Protection Rating: 600V
Temperature Range: 32°F – 104°F (0°C - 40°C)
Dimensions: 6.87” x 3.50” x 2.50”
(174.50 mm x 88.90 mm x 63.50 mm)
Weight: 12.16 oz.
Housing: ABS