User guide

Using the NiTek X

11 NiTek X Dive Computer User Manual v1.1

Accessing display modes and screens

There are some display modes that the NiTek X enters and/or

exits automatically. For example, by taking the NiTek X

underwater, the dive mode automatically turns on. Upon

surfacing, the NiTek X automatically enters the surface mode.

To access other modes or screens, requires the use of the NiTek

X’s buttons.

Button operation

The NiTek X has two buttons (A (mode) and B (set)), which are

used to access the different modes and screens. To use the

buttons, simply press the button once or hold the button down

depending on what you are trying to do. The correct procedure to

use is clearly defined in each topic throughout the manual.

• A (mode) button: This button is used to select and scroll

through the different modes, such as time mode and locks in

setting values when setting options

• B (set) button: This button is used to set an option, such as

setting the date

The front of the NiTek X, showing the two buttons that are used

to access and setup the different modes and options