User guide

Using the NiTek X

13 NiTek X Dive Computer User Manual v1.1

Time Display and Set Mode

Time Display and Set mode is used to set and view the time of

day and date. When you enter this mode, “TIME” is displayed

on the screen.

(1) Date: This is the month and day. The first digit is the month

and the second digit is the day. For example, 1-24 represents the

twenty-fourth day of January.

(2) Year: This is the year.

(3) Time of day: This is the time of day expressed in hours and

minutes. Time can be displayed in 24-hour (military) format or

12-hour format. When in 12-hour format, an AM or PM appears

on the screen.

(4) Seconds: This is the seconds for the time of day.

To display the time and date:

Time and date information is displayed when the NiTek X

is the Surface mode screen.

1. To enter the Surface mode screen from any other screen,

repeatedly press button A.

“C/C” or O/C” will be displayed in the lower left of the

screen, with the time and date across the top of the screen.

Setting the time and date

Setting the time and date are done in the time set mode. You can

enter or change the year, month, day, hours, minutes, and

seconds in this mode.