User guide

Using the NiTek X
NiTek X Dive Computer User Manual v1.1 26
To enter Plan mode:
1. Repeatedly press button A until “PLAN” is displayed.
2. Press button B to enter the Plan mode screen.
3. Press button B to advance the depth.
The no-decompression time limits change automatically
based on the depth.
4. When finished, press and hold button A for 2 to 3 seconds to
return to surface mode.
WARNING: Do not plan dives to depths deeper than those for
which the NiTek X is capable of displaying an available no-
decompression limit. Doing so could cause you to exceed the no-
decompression limits or a limiting PO2 of 1.4 or 1.6
atmospheres. This may increase your risk of decompression
illness or CNS oxygen toxicity and can lead to serious personal
injury or death.