User guide

Using the NiTek X

37 NiTek X Dive Computer User Manual v1.1

Log Mode

For each dive, the NiTek X stores information, such as depth, time,

gases, etc. in a log. This stored log information can be viewed directly

from the NiTek X’s screen when in log mode. The logbook will hold a

minimum of 15 hours, depending on settings. Each dive is assigned a

log number and the day’s date, making it easy for you to toggle between

the dive log pages.

(1) Log entry number: This is the sequence in which the log appears. The

most recent log entry has the lowest number, beginning with log one. When the

computer’s memory is full, the oldest dives are overwritten with the new dives.

This causes the log entry number assigned to an earlier dive to change.

(2) Max depth: This is the maximum depth reached during the dive.

(3) Date: This the month and day of the dive.

(4) Dive time: This is the actual bottom time for the dive.

(5) FO2 and FHE gas percentages: These are the FO2 and FHE gas

percentages that you entered for the dive. All calculations were based on these

percentages.

To view a dive log:

1. Press button A until “LOG” is displayed.

2. Press button B to enter the log mode screen.

3. Press button B to change to the log page for the most-recent dive.

-OR-

Repeatedly button B to scroll “down” through the logged dives. To fast

scroll, press and hold button B.

4. When finished, press and hold button A for 2 to 3 seconds to return to

surface mode.