User guide

Using the NiTek X

NiTek X Dive Computer User Manual v1.1 38

Profile Mode

Profile mode enables you to see a record of the depths you reached at

various points during a dive. You can display a detailed profile of each

dive stored in the log. When a dive is selected, the computer

automatically displays the depth and the time in the dive when you

reached that depth until it reaches the end of the dive.

Dive profile information is either stored in 15- or 30-second intervals

during a dive. This must be set in dive mode before a dive. Refer to

“Setting the dive profile sampling rate” for more information.

The dive number and date of the dive are displayed when you scroll

through the dives. This makes it easy to find the dive profile you want

to view.

(1) Dive log number: This is the dive number that corresponds to the dive

number when in log mode.

(2) Max depth: This is the maximum depth reached during the dive.

(3) Dive time: This is the actual bottom time for the dive.

To view a dive profile:

1. Repeatedly press button A until “PROF” is displayed.

2. Press button B to enter the profile mode screen.

3. Press button B to change to the profile page for the most-recent dive.

-OR-

Repeatedly button B to scroll “down” through the profiled dives. To fast

scroll, press and hold button B.

4. When finished, press and hold button A for 2 to 3 seconds to return to

surface mode.