User guide

Introduction
NiTek X Dive Computer User Manual v1.1 4
cumulative exposure to elevated PO2s exceeds
recommended limits
• The NitekX can be used with closed-circuit rebreathers and
includes constant-PO2 setpoint capabilities (0.4 to 1.6), and
is upgradable for 4
th
cell monitoring
• External oxygen-sensor monitoring and analysis capabilites
can be added
• The NiTek X can be programmed to display data in Imperial
or metric units
• Dive depth can be displayed in fresh or salt water
equivalents
• Preset and custom Conservatism or Gradient Factors can be
programmed to increase dive-safety margins
• Special mode indicators makes it easy to determine what
display mode or screen you are in at any time
• The NiTek X has a selectable backlight to illuminate the
screen in all light conditions
• The NiTek X’s memory capability enables it to hold and
display log data for a minimum of 15 hours of dive time,
depending on settings
• Detailed dive-profile information can be stored for each dive
through user-programmable sample intervals of 15 or 30
seconds (the longer intervals allow data for a greater number
of dives)
• Dive data can be uploaded and stored in a dive log format on
a desktop or laptop computer using the Diverite NiTek
Workbench™ software and optional PC interface.