User guide

Using the NiTek Plus
NiTek Plus Dive Computer User Manual 13
Setting the time and date
Setting the time and date are done in the time set mode. You can
enter or change the year, month, day, hours, minutes, and
seconds in this mode.
To set the time and date:
1. Press Lock while in time display mode.
The “alternate time” field flashes.
Note: To set the alternate time or to swap the primary time
with the alternate time, see “Setting an alternate time” or
“Swapping primary and alternate time.”
2. Press Select to select the seconds field.
The “seconds” field flashes.
3. Press Set to “00” the seconds field or press Select to select
another field, such as the minutes field.
4. Using Select and Set, set the year, month, day, hour,
minutes, seconds, and whether you want the time displayed
in 24-hour format.
For example, 1:00 PM would be 13:00.
5. Press Lock.
The computer returns to the time display mode.
Setting the dual time
The NiTek Plus has the ability to display two different times,
which can be set for two different time zones.