User guide

Using the NiTek Plus
14 NiTek Plus Dive Computer User Manual
To set an alternate time:
1. Press Mode until the arrow points to D.T. at the bottom of
the screen.
2. Press Select.
The alternate time field “hour” flashes.
3. Press Set to change the hour.
4. Press Select to select the minutes field.
5. Press Set to change the minutes.
6. Press Lock.
7. Press Mode.
The computer returns to the time display mode.
Swapping primary and alternate time
You can swap the primary time field with the alternate time. This
is useful when traveling to a different time zone. The local time
can be displayed in the primary time field and the time zone you
traveled from can be displayed in the alternate time field. This
allows you to monitor the time in both time zones.
To swap primary and alternate time:
1. Press Mode until the arrow points to D.T. at the bottom of
the screen.
2. Press Select to swap alternate and primary times.
Activating the back light
The NiTek Plus has a back light that illuminates the screen.
To activate the back light:
1. Press Set.
The back light illuminates for four to five seconds.
2. Press Set again to reactivate the back light.