User guide

Using the NiTek
NiTek Dive Computer User Manual 11
Accessing display modes and screens
There are some display modes that the NiTek enters and/or exits
automatically. For example, by taking the NiTek underwater, the
dive mode automatically turns on. Upon surfacing, the NiTek
automatically enters the surface mode.
Accessing other modes or screens requires the use of the NiTek’s
buttons.
Button operation
The NiTek has two buttons (A and B), which are used to access
the different modes and screens. To use the buttons, simply press
the button once or hold the button down depending on what you
are trying to do. The correct procedure to use is clearly defined
in each topic throughout the manual.
Button A
Button B
The front of the NiTek, showing the two buttons that are used to
access and setup the different modes and screens