Laboratory Tables * All Fastrak Products Shipped in Five Business Days (Quantity Restrictions: 30 Per Table; 6 Per Cabinet) p : 87 7 . 34 8 . 96 6 3 / e : I n fo @ D i ve r s i f i ed W ood c ra f t s . co m / w : D i ve r s i f i ed W ood c ra f t s .
Categorical Index Accessories 54 Wood Cubbies/Lockers 69 Book Trucks 67 Bookcases 68 Casework 105 Desks 51 FACS 62 Flat Storage 70 Microscope Storage 81 Mobile Demonstration Units 91 Mobile Storage 84 MOVE Series 104 Robotics 89 Accessories (Robotic) Safety 88 56 Seating 103 Sink Stations 49 Specialty 96 3D Printer 96 Art 98 Augmented Reality Sandbox 96 Hydroponics 97 Lumber 101 Tables 7 Accessories (Table) 26 Adjustable Height 12 Drafting 18 Plannin
Numerical Index PAGE # 54 54 54 76 26, 105 54 54 53 53 54 105 34 105 60 63 63 15, 64 65 51 34, 55 55, 88 55, 88 55, 88 31, 66 26, 55 53 54 54 54 53 12-14 54 105 105 51 52 52 105 52 53 51 79 46 49 57 105 39 105 26 105 62 63, 98 64 62 15, 64 65 65 63 31, 66 60 42 45 43 44 ITEM # 100051 100061 100118 100135 100283 100466 100467 100604 100994 206505 229717 234708 240297 249732 250484 250485 250487 250515 251635 251909 251909 251913 251975 252208 253244 100002-8 100047-49 100074-BKR 100076X4 100245GRARM 100709X
Numerical Index PAGE # 25 31, 66 96 69 67 98 39 41 40 8-9 69 24 24 21 23 18 98 105 105 71 70 20 21 23 22 22 22 77 85 87 56 61 61 70 56 29 29 28 74 73 10 97 15 50, 92 19 32 100 102 101 101 101 19 78 10 32 32 29 80 85 26 97 28 30 87 ITEM # ALTD Series AMT Series ARS-4030 BP Series BT Series C-38 C2100-C2400 Series C2410 & C 2610 Series C2510 & C2710 Series C7000 Series CC Series CDTC-1 Series CDTC-60 CDTC-70 Series CDTC-73 CT-200P Series CWC-72P D03 Series D06 Series DBC-1 DPSC-50 DT-1, 2, 3, 4 AND 9 Series
Create Your Custom Table Table Size Codes 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 730 740 748 760 780 790 Apron Style P = Plain C = Book Compartment D = Drawer P 714 = = = = = = = = = = = = = = = = = = = = = 24" 42" 30" 30" 30" 30" 21" 36" 21" 36" 24" 21" 36" 21" 36" 24" 42" 48" 24" 42" 42" X 48" X 48" X 48" X 54" X 60" X 72" X 48" X 48" X 54" X 54" X 54" X 60" X 60" X 72" X 72" X 72" X 72" Round X 60" X 54" X 60" Table Option Codes Table Surface Codes 5 Table Height Codes Woo
Tables Plain Apron Oak Tables Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"D x 4-1/2"H with heavy-duty 13-gauge steel corner braces.
Tables Maple Tables Available in a variety of sizes, with several different top materials. Constructed of solid maple and finished with an earth-friendly UV finish. Aprons are constructed of solid maple and are 13/16"D x 4-1/2"H with heavy-duty 13-gauge steel corner braces. The unit has solid 2-1/4" maple legs with 5/16" hanger bolt installed, and are attached to the table with nuts and washers (supplied). All tables include leg boots and levelers. Choose from plain or book compartment apron.
Tables Oak Book Compartment Tables Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs.
Tables Add-A-Cabinet Back of Cabinet This unique table gives you the ability to change it as your needs change. Basic unit comes with a 60"W x 30"D x 36"H table that is reinforced with welded steel angle understructure. Cabinets can be mounted to the underside of the table and attached using a solid bolt connection. The unit comes standard with one cabinet, but there is enough room for two cabinets to be hung from the table. The cabinets measure 24"W x 22-1/2"D x 28-1/2"H.
Trapezoid Tables Media Trapezoid Table Add a new dimension to your collaborative workspace. This trapezoid shaped table stores a TV mount that holds up to a 40" television (not included). The table's shape makes it perfect to use with trapezoid tables. It has a solid oak apron and legs. The 1-1/4" thick plastic laminate top and apron are attached to the angle iron steel frame ensuring stability. The television mount is enclosed inside an oak plywood cabinet.
Adjustable Height Tables Maple Unit Fixed Height Riser Table Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose.
Adjustable Height Tables Adjustable Height Table A perfect solution for ADA requirements that can adjust in 2 cm increments from 27-3/4" to 39" (42"H with 3" spacer provided). Can also be adjusted for use as an incline surface for physics. Solid 4-1/2" oak aprons are attached to your choice of three top options: 1-1/4" plastic laminate, 1-1/4" ChemGuard, or 3/4" phenolic. Note: phenolic resin tops are heavier and may require two people to adjust the height.
Adjustable Height Tables Adaptable Table (ADA) Adaptable...the name says it all. The height can be adjusted so easily—adapt to your situation. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. Use the table at sitting height, standing height, or even at display height. Use the table for elementary children through adults. Ideal for use by a person in a wheelchair. Make it match the height they need. Table adjusts in 2 cm increments.
Adjustable Height Tables Hi-Lo Bench Designed with today’s challenging ergonomic and ADA issues in mind. These tables allow the work surface to be adjusted for a comfortable and efficient positioning of the arms and hands. The 11" ranges goes from 25" to 36'H x 30"D. Turning the hand crank 10 times moves the work surface 1"H. Choose from either a 1-3/4" solid maple or 1" epoxy resin top.
Planning Tables PT-62P PT-61M PT-60M Maple Almond Plastic Laminate Natural Birch Plastic Laminate PT-62PNB Planning Tables Designed to be used in most any environment from art and general planning to sewing measures: 34-1/2"W x 12-1/16"D x 2-1/4"H. Each tote measures: 13-1/2"W and model construction. The base is constructed of two tapered solid maple pedestal x 19"D x 3-1/2"H. Other choices include standard height (30"H) or elementary style panel legs and two solid maple truss bars.
Planning Tables Extra Large Planning Table ITEM # A larger model of the plain pedestal table. Designed to be large enough for multiple users to work on projects. The base is constructed of two tapered solid maple pedestal style panel legs and two solid maple truss bars. Available in 1-3/4" solid maple top or 1-1/4" plastic laminate in either birch or almond color. Height option of 30"H or 36"H.
Drafting Tables Work Desk/Table Provides a sturdy maple base to work on projects. The panel style legs are made of solid maple and have adjustable levelers. The top is 1-1/4" almond colored plastic laminate. The unit can be ordered in three lengths. The 36"W unit has one grommet hole and the 48"W and 60"W units have two grommet holes.
Drafting Tables Instructor Drafting Table This attractive instructor's desk is made of solid maple construction with a 3/4" almond colored plastic laminate top. The apron has two storage drawers; one for prints and a second for tools. Both drawers lock. The top adjusts from 0-30 degrees, has a pencil strip and has a soft close feature. Ships partially assembled. The desk is available in two widths (60"W and 72"W) and is 37-1/2"D x 36"H.
Drafting Tables Drawer Base Drawing Table Dedicate a drawer to each class hour with this drawing table. This compact unit has a plywood cabinet and solid maple apron and legs. The unit includes six locking drawers (10-1/2"W x 19-3/4"D x 3-1/4"H) that are master-keyed separately. The drawers are completely finished and dovetailed on all four sides. The unit is finished with an earthfriendly UV finish.
Drafting Tables Portable Drafting Table Make any surface a drawing or drafting surface with this portable drafting table. This drawing unit has a 24"W x 20"D drafting surface made of 3/4" almond colored plastic laminate with a PVC edge. Use as a flat surface or position to a 30, 45 or 60 degree angles. The rubber feet keep the maple base from slipping. Front surface has a pencil ledge to hold drawing materials. Folds flat for storage.
Drafting Tables Large Drawer Base Drawing Table This deluxe unit has a plywood cabinet and solid maple apron and legs. Base includes six locking drawers (20-1/2" x 19-3/4"D), master-keyed separately. The drawers are completely finished and dovetailed on all four sides. The almond colored plastic laminate 2-piece 3/4" top has an adjustable side (33"W x 32-1/2"D) and a flat reference side (15W" x 32-1/2"D). Adjustable side has a pencil stop and includes the soft-close feature.
Drafting Tables Two-Station Drawing Table DT-80A Provides drawing space for two students and storage for multiple classes. This compact unit has a plywood cabinet and solid maple aprons and legs. Choose from six or eight locking (master keyed separately) drawers (20-1/2"W x 19-3/4"D) that are completely finished and dovetailed on all four sides. The top is a 3/4" almond colored plastic laminate. There are two fully adjustable drawing areas (28"W x 32-1/2"D) with pencil stops and soft close.
Drafting Tables CDTC-1 Desktop Model (W/Optional Vyco & Ruler) Adjustable Drafting/Drawing Table Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable 3/4" almond colored plastic laminate top has a soft close feature and includes a pencil stop.
Drafting Tables ALTD-1 Our adaptable drawing table’s height adjusts in 2 cm increments from 27-3/4" to 39"H (42" with included spacer) in seconds, making it great for people that like to work at different heights. The art/drafting/graphics table is made for one student or teacher application. This 3/4" almond colored plastic laminate top comes with one adjustable side (42" x 30") and one fixed (18" x 30") side.
Table Accessories Test Dividers Looking for a way to make your multi-student tables work for testing situations? These test dividers are an easy solution. The dividers easily clip on to any tabletop and provide just the right amount of privacy for test taking. The panel is made of a sturdy black plastic, which provides a dense, private divider. The resin clip holds the panel in an upright position and slips easily onto the edge of your table. Sold in a set of 3.
Workbenches Open-Style Wood Workbench This workbench has a large work surface and plenty of open storage space on the # VISES TWO-STATION FOUR-STATION maple plywood lower shelf. The base is constructed of solid 2-1/4" maple legs and 0 1 2 4 WW2-0V WW2-1V WW2-2V N/A WW4-0V* N/A WW4-2V WW4-4V* frame. The top is 2-1/4" thick maple; 2-person (28" x 64" top); 4-person (54" x 64"). Can be ordered with or without black vises. Vises will need to be installed on site. The unit height is 31-1/4"H.
Workbenches Open Style Auxiliary Workbench Designed for use against the wall, this series of workbenches provides the durability LENGTH SHELF # LEGS 31-1/4"H 37-1/4"H of hard maple tops with the functionality of open shelves. Constructed of solid maple 6' 8' 10' 12' 6' 8' 10' 12' 4 4 6 6 A32-6W A32-8W A32-10W A32-12W A37-6W A37-8W A37-10W A37-12W legs, a plywood shelf with a back curb and 2-1/4" solid maple top.
Workbenches (Shown with Drip Pan) Side Clamp Bench This table is made to accept bar clamps and to provide an area for both gluing projects and clamp storage. The top is open and includes 17 sets of 3/4" wide grooves which accept bar clamps three feet and over. These grooves are cut into heavy gauge steel rail. ITEM # GCT-7236 GCT-DP STYLE Bench only Bench w/Drip Pan The lower center rail is adaptable for storage of hand screws and “C” clamps.
Workbenches See Page 34 Steel Workbench Base consists of sturdy heavy gauge steel legs with stringers. Available in black or gray and with or without vises. Choose between two-station and four-station units. Top is constructed of 2-1/4" maple. Two-station measures: 64"W x 28"D x 32-1/4"H. Four-station measures: 64"W x 54"D x 32-1/4"H.
Workbenches AMT-6030M (Shown with Optional Shelf & Casters) Fab-Lab Workbench Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2"H to 35-1/2"H. Add the optional 5" locking casters and you'll add another 6" in height. The legs are 12 gauge steel and have 14 gauge stringers for strength and stability. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1400 lbs.
Workbenches Black Grey Locker Base Base consists of heavy gauge steel unit, 1-section construction with reinforced 20-gauge side panels. Door has spring hinges, padlock hasp & knockout plug for A1:T3096 lock. This unit also has 1 adjustable shelf. These are available in gray or black.
Workbenches Four-Station Steel Workbench Base consists of a double-faced heavy gauge steel unit, welded and riveted throughout. The unit provides 12 vertical locker openings which measure 12"W x 21"D x 15"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without four vises and in either gray or black base units. Overall size: 64"W x 54"D x 33-1/4"H.
Workbenches Black Grey Four-Station Steel Workbench Base consists of a double-faced heavy gauge steel unit, welded and riveted throughout. The unit provides two door units. Each side has double swing doors with cylinder lock mounted in a chrome handle with two point locking device and one adjustable shelf. Top is constructed of 2-1/4" maple. Available with or without four vises. Available in either gray or black base units. Overall size: 64"W x 54"D x 33-1/4"H.
Workbenches Black Two-Station Steel Workbench Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. Grey The unit provides six horizontal locker openings which measure 18"W x 21"D x 10"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Workbenches Two-Station Steel Workbench Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides two door units. Unit has double swing doors with cylinder lock Black mounted in a chrome handle with two point locking device and one adjustable shelf. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either Grey gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Workbenches Four-Station Wood Workbench Double faced unit has a cabinet with doors and an adjustable shelf on each side. The locking doors have pulls and are hung on five knuckle institutional hinges. The base of the unit is constructed of solid maple and maple veneers. The 2-1/4" top is hard maple. The unit is ITEM # WW31-0V WW31-4V STYLE Bench Only Bench w/4 vises ITEM # WW32-0V WW32-4V STYLE Bench Only Bench w/4 Vises finished with an earth-friendly UV finish.
Workbenches Four-Station Wood Workbench Twelve vertical locker openings with doors (six on each side) have room for backpacks and other items. Openings measure 11"W x 21"D x 11-1/8"H. The locking doors have pulls and are hung on five knuckle institutional hinges. The base of the unit is constructed of solid maple and maple veneers. The 2-1/4" top is hard maple. The unit is finished with an earth-friendly UV finish. Unit can be ordered with or without vises. Overall size: 64"W x 54"D x 31-1/4"H.
Workstations Storage Cabinet Tables Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height.
Workstations C2716K C2516K Two-to-Eight Student Island Workstations Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments.
Workstations C2416K Four-to-Sixteen Student Island Workstation C2616K Double faced tables that provide a fully equipped science center from four to sixteen students. Each unit is constructed of solid oak, hardwood veneers and finished with a chemical resistant, earth-friendly UV finish. The double faced units contain a (C2426K) solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students.
Workstations 2826K Perimeter Workstations Provides work space for up to four-students while storing your laboratory equipment of 1" solid epoxy resin or 3/4" solid phenolic resin top with back splash, solid epoxy in these perimeter workstations. Choose from 4 different configurations (see below). drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod The four cabinets which make up a single unit measure 24"W x 16"D x 35"H.
Workstations 2936K | Front View Forward Vision I This popular workstation meets the needs of students and teachers today. The Forward Vision 4-Student Workstation allows four students to work at a single station while all are facing the teacher. The unique design leaves enough room to store four stools (not included) under the workstation. Sink units come with two combination cold water/gas fixtures. The 2916KLH and 2936KLH include two rod sockets and LabHands for holding laptop computers and books.
Workstations Forward Vision III 2966KF Durable lab table features a large 68" x 36" tabletop. It comes standard with two combination cold water/gas fixtures and one GFI AC electrical receptacle. Your choice of two cabinets: Full door cabinet with adjustable shelves or door/drawer cabinet with a drawer and storage area with one adjustable shelf. They are finished with a chemical resistant, earth-friendly UV finish with a choice of 3/4" phenolic resin or 1" epoxy resin top.
Workstations Ez-Lift Workstation (Manual & Push-Button) Both of the units' height is adjustable from 28" to 40"H. Choose from 1" epoxy resin or 3/4" phenolic resin top. Students have plenty of space with either the 96"W x 50"D or 88"W x 46"D work surface. Two hooks mounted underneath hold up to four book bags. The bone powder-coated steel and oak veneer base conceals the lifting mechanism. It is finished with a chemical resistant, earth-friendly UV finish.
Workstations Pedestal Base Option Octagon Workstation Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 62", solid 1" epoxy resin or 3/4" phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers.
Workstations 3416K-L (Sink in Peninsula) 3516KF-L (No Sink) 3516K-L (Sink in Wall) Peninsula Workstation This unique L-Shaped unit is designed so four students can use the workstation include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly while facing the teacher. It has storage on the peninsula and on the wall. It is made chemical resistant UV finish. Assembly and installation of electricity and plumbing is of oak and oak veneers with black accents.
Workstations 3216K (Shown w/Two 36"H Plain Apron Tables) 3216K Wall Service Bench Need all your services in one place or looking to add a wall of cabinets that include services? The Wall Service Bench offers storage and services all in one unit. Constructed of solid hardwood and oak veneer plywood. The Wall Service 3226K Bench features your choice of a 1" solid epoxy resin or 3/4" phenolic resin top with a 18"W x 15"D x 11"H epoxy resin sink and two combination cold water/gas fixtures.
Sink Stations Trifacial Workstation Hexagonal workstation designed to be used with standard 36" laboratory tables. This unit features an epoxy resin top with a drop-in hexagonal lipped sink. Apron and pedestal are constructed of solid hardwoods, and oak veneers, with a chemical resistant, earth-friendly UV finish. Equipped with three combination cold water/gas fixtures and three GFI duplex receptacles. The center pedestal has a removable panel to access utilities.
Sink Stations Hot Water Mobile Station Need hot water, but there is no plumbing close? This hot water stations provides the ability to move to any location and still have access to hot water. The oak veneer cabinet features a water heater and water pump providing you with hot or cold water. The tanks are NSF, UL and FDA approved and labeled accordingly: 5 gallon fresh water and six gallon waste water tank.
Desks 8' Instructor Desk Constructed of solid oak, and hardwood veneers, this unit serves as a complete demonstration center offering a spacious work surface. It is finished with a chemical resistant, earth-friendly UV finish. Included are drawers, and a cupboard for storage of large items. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation.
Desks Teacher’s Work Desk A beautiful desk that will match the rest of your furniture. This 60"W x 30"D x 30"H desk is constructed of select hardwoods and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. The top is 1" black high pressure laminate. The top also has two grommet holes for threading power cords. The pedestals have 2 file drawers, four smaller drawers and one center pencil drawer. All the drawers lock, except the pencil drawer. The knee space provided is 26"W.
Desk Accessories ADA Instructor Desk An accessible instructor's desk. This unit has a roll-under sink with paddle handle cold water faucet and gas fixture. The knee space is wide enough for a wheel chair to fit into the space (sink measures: 14"W x 10"D x 5"H). The 34"H meets ADA requirements (having a 19"depth, 27" knee height, 30" width and 8-1/2" knee clearance from the front table top edge). It includes a duplex outlet, file drawer, three smaller drawers and a pull-out writing board.
Accessories Rod Sockets Receives the tapered end of 3/4" uprights. Gas Cocks These fittings have a ground key valve for long life. Units are complete with nipple, lock nut and washer for installation and are deck mounted. Gooseneck Faucets Chrome plated brass, deck mounted faucets. Multi-service fixture includes cold water and two gas cocks. Mounting hardware provided. Hand Pump Piston action mechanism for high water flow and long term prime lock. Chrome base and spout.
Accessories Soldering Board A high temperature insulated millboard with ¼” soldering sheet. The sheet takes a maximum temperature of 1380 degrees and has a heat flow rate at 750 degrees. This is the perfect application to protect your work surface on table or cabinet. This millboard is framed with ½” plywood bottom and edge banding to create the perfect ¾” soldering surface for any project.
Safety Sanitizing Monitor Storage Cabinet The Monitor UV Germicidal storage cabinet measures 24-1/2"W x 32"H x 9-1/2"D. UV lamp is in use. Five minute cycle is controlled by a timer and doors are interlocked Weighs 45 pounds. The cabinet holds 6 glasses or 5 goggles to a shelf on 8 shelves. with tamper resistant latches. Germicidal lamp has a 20 year limited warranty. No assembly required. Lockable, two keys provided. Wall or shelf mountable with a 7' With an average kill rate of 99.
Safety Front Panel Mobile Fume Hood Station A versatile fume hood that can be used in multiple classrooms. This ductless fume sampling port, programmable timer, energy ports, one filter (2-year average life) hood has an all-inclusive filter that handles liquids, gases and solid chemicals. and a list of approved chemicals. A separate filter must be ordered.
Safety Shower/Eyewash Station This unit provides convenient storage for lab safety supplies. Featured is an emergency drench shower head of high impact ABS plastic with a stay open chrome-plated brass valve. Eyewash unit has a 10" diameter stainless steel bowl, lever action ball valve on a plastic laminate top. Upper storage space has 2 adjustable shelves. The lower cabinet locks for security or access for a wheelchair on ADA model. Service piping not supplied.
Safety 340-3622K 3420L-2422K Chemical Storage Cabinet The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls.
Safety Acid & Corrosive Storage Cabinet Blue steel safety cabinets for corrosives have the same quality safety features as the cabinets for flammables. This unit comes with double-wall construction, dual vents, grounding wire connections, adjustable shelves, leakproof sills, three-point self-latching doors and leveling feet. Manual-close doors opens to a full 180 degrees and self-latches when pushed closed.
Safety First Aid Safety Wall Cabinet This wall mounted first aid cabinet provides instant access to crucial safety materials. Included in the safety cabinet is an ABC fire extinguisher, fire blanket, first aid kit, 2 plastic one gallon jugs, and one galvanized pail. The cabinet has sliding upper doors and one hinged door. Behind the hinged doors are two adjustable shelves. Two cubbies provide storage space for the jugs.
FACS High Quality Compartment Sinks High quality stainless steel sinks for your toughest cleaning tasks. Whether you sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion need a drain board model or a stainless steel utility/prep basin, we have the resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select right model for you.
FACS Budget Compartment Sinks 18 gauge T-430 stainless steel budget sinks have 1-1/2" rounded front and side edges. The 1-5/8" galvanized legs have adjustable high impact corrosion resistant feet. The sinks have 3-1/2" drains and accommodate 8" over counter splash mount faucets. Uses fixture #250784. (faucet is not included). This sink is not NSF Approved. Working height is 35-3/4".
FACS Stainless Steel Tables Stainless steel tables with galvanized steel legs and under-shelf. The T-430 18-gauge stainless steel top has two sound deadened integrally welded 5-inch "C" channels to reinforce and maintain level working surface (prevent sags). The galvanized legs are 1-5/8" diameter and have adjustable high impact corrosion resistant feet. The under-shelf is adjustable and has two pins per corner providing strength and stability. NSF Approved.
FACS Stainless Steel Equipment Stand An 18 gauge T430 stainless steel equipment stand designed to hold large equipment. The top is reinforced with 1-1/2" square tubing that has a 3 sided 2" riser with hemmed edge. The legs (1-5/8" diameter) and are galvanized steel. NSF Approved.
FACS Sewing Units Our sewing table is a complete storage solution for your sewing, quilting and crafting projects. Crafted with a solid maple frame and a 1-1/4" plastic laminate almond colored top, this table has a smooth and spacious work surface. The maple is finished with an earth-friendly UV finish. The locking storage cabinet features a pullout shelf on full extending glides for easy storage of your sewing machine when not in use.
Book Trucks Deep Bronze Oak BT113 BT012 BT211 Rich Honey Oak Solid Oak Book Trucks Bring the beauty of wood into your classroom or lab. Durable trucks combine a distinctive wood grain of select oak with a natural, medium or dark finish. The fixed shelves are glued then BT311 Northwoods Oak reinforced with screws to support heavy volumes. All trucks have 5" locking swivel casters.
Bookcases Bookcases Open shelving allows for a clear view for all items stored. These can be made with your choice of oak or maple construction. Adjustable shelf weight capacity is 40 lbs. per square foot. A chemical resistant, earth-friendly UV finish coats the top, back and sides of each unit. Available in 3 widths, 3 depths and 3 heights to accommodate many storage needs.
Wood Cubbies/Lockers Wood Cubbies A great way to store materials in your classroom. These cubby units are available in both oak and maple veneer and can be ordered in sections from one to four. Each section contains four cubbies, which measure: 10-1/2"W x 14"D x 10-1/2"H. The 51"H models have four cubbies per section. 72"H models have 6 cubbies per section. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability.
Flat Storage Paper Storage Cabinet This maple plywood cabinet provides storage space for flat items like paper, blueprints, and maps. It has seven pull-out drawers measuring 41"W x 24"D x 3"H (inside dimension). Both doors lock. The cabinet can be used as a work surface as well, with its 50"W x 30"D 1-1/4" almond colored plastic laminate top. This unit is meant to be against the wall, the back is unfinished.
Flat Storage Wall Storage Bench Constructed of solid maple and maple veneers with an earth- friendly UV finish. The unit includes seven pullout shelves behind locking doors (42-15/16"W x 26-1/4"D, inside dimensions) and eight drawers (19-15/16"W x 18"D, inside dimensions) drawers are fully dovetailed and include locks. Available in 1-3/4" solid maple top or 1-1/4" almond color plastic laminate. This unit is meant to be against a wall. The back is unfinished.
Tall Storage Deluxe Wardrobe Cabinet Constructed of oak veneers and solid hardwoods with a chemical resistant, earth-friendly UV finish. Half of the unit features a coat rod with a shelf above. Unit also includes two unexposed file drawers with full extension glides. One fixed and three adjustable shelves are found above the file drawers. Mirror measures: 13"H x 9-1/2"W. Unit has three-point latching handles which lock. Weight: 360 lbs.
Tall Storage Tall Storage Cabinet Constructed of solid hardwood, solid maple and maple veneers, and highlighted by an earth-friendly UV finish. Upper section consists of four adjustable 1" shelves and one fixed bottom shelf. The locking doors provide secure storage. The lower section consists of four locking drawers (Inside drawer dimensions: 6-3/8"H x 20-7/8"W x 18-3/4"D) that are fully dovetailed. ITEM # GSC-8* SIZE 48"W x 22"D x 84"H Cabinet should be secured to the wall for safety.
Tall Storage Tall Storage w/Doors Solid hardwood and wood veneers with a chemical resistant, earth-friendly UV finish. Hinged doors. cabinet comes with a three-point locking system. Units 36" and wider have 1" shelves. 24" wide oak door units have 3/4" shelves, and one locking door that is hinged right. All units include two fixed and four adjustable shelves (weight capacity: 40 lbs. per sq. ft.). Choice of oak or maple.
Tall Storage Tall Storage w/Split Glass Doors Two and four glass door oak display cabinets that are a great addition to the classroom. The top and bottom doors are divided making it easy to segregate your display types. The fixed shelf in the middle creates the ability to lock the top and the bottom doors separately. The right hinged doors have a lock which locks both right and left hinged (with astragal) doors.
Tall Storage Tote Tray Storage Cabinet A great place for students to store their art or science projects. This organized storage case includes and holds 48 heavy-duty plastic tote trays. Choose from hinged oak or maple doors with three-point locking handles. It is finished with a chemical resistant, earth-friendly UV finish. Includes 48 totes. Weight: 490 lbs.
Tall Storage Drawing Supply Cabinet Hold all your key drawing supplies in one place. This plywood and maple hardwood cabinet is built to hold T-squares, 18" x 24" drawing boards and other supplies for either 24 (48" cabinet) or 36 (60" cabinet) students. The 3-point locking handles protect the items from theft. An upper shelf provides a place to store extra materials such as paper and books. The eight totes provide space to put compasses, triangles, and other drawing supplies.
Tall Storage Premier Display Cabinet These beautiful maple and oak cabinets can be used to display anything from artwork to taxidermy to trophies. One fixed bottom shelf and three adjustable tempered glass shelves provide lots of flexible storage. Weight capacity per shelf is 30 lbs. The sliding glass doors and sides allow people to view the highlighted items through a locked display. The light is included but not installed. Local codes may require it to be hardwired.
Tool Storage 48" Tool Cabinet Storage Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, are lined with 1/4" pegboard. The lower half has one fixed and two adjustable 1" plywood shelves. Both sets of doors include locks. The cabinet can be ordered with pegs designed for either general shop tools or woodworking tools. They can also be ordered with the tools. Three sizes of totes are also available and sold separately.
Tool Storage 60" Tool Cabinet Storage Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, is lined with 1/4" pegboard. The lower half has one fixed and two adjustable 1" plywood shelves. Both sets of doors include locks. The cabinet can be ordered with or without tools— they are designed for a variety of tool combinations and with tools for a specific use. Three sizes of totes are also available and sold separately.
Microscope Storage Micro-Charger Glass Door Cabinet This beautiful oak cabinet with tempered glass doors is finished with a chemical resistant, earth-friendly UV finish. It is equipped to recharge up to 16 cordless microscopes (not included) within eight hours while it is safely stored behind locked doors (Microscope Dimensions: 8-3/4"W x 16-3/4"H). All this with only one electrical connection. The microscopes are protected from theft by a three-point locking handle. Overall size: 36"W x 84"H.
Microscope Storage Mobile Micro-Charge Station A mobile oak cabinet that is equipped to recharge microscopes while they are safely stored behind locked doors. The peninsula style cabinet interior holds 20 microscopes (7"W x 9"D x 15"H) and has storage space for other essentials such as slides. All this with only one electrical connection from the cabinet’s side. It is finished with a chemical resistant, earth-friendly UV finish. The 1-1/4" plastic laminate top doubles as a work surface.
Microscope Storage Mobile Laptop Recharging Station A safe, efficient and mobile way to handle laptop computers. Sliding hardwood plywood doors front and back provide easy access to storage as well as the charging station. Multiple outlet plug strips in the back section allow easy plug-in of up to 20 computers. The cords from the outlet strips can be fed through a hole in the floor of the unit so that the doors can be locked during charging.
Mobile Storage Economy Mobile Storage Cabinet Ideal for moving demonstrations around the room, school or lab. Constructed of select oak and oak veneers with a chemical resistant, earth-friendly UV finish. Includes unbreakable aluminum sliding door glides, lock and one fixed shelf (clearance of the shelf is 13-5/8"). Choose from two top options: 1-1/4" Plastic Laminate or 1-1/4" ChemGuard. Unit has a weight capacity of 500 lbs. Weight: 180 lbs.
Mobile Storage Mobile Storage Cabinet This mobile cabinet is constructed of maple plywood with a chemical resistant, earth-friendly UV finish and rolls easily on 4" locking, swivel casters. Choose from two top options: 1-1/4" ChemGuard top or 1-3/4" maple top. And a choice of two cabinet styles: open style cabinet with no doors, or a locking cabinet with two swinging doors. Both styles include an adjustable interior shelf.
Mobile Storage Mobile Tote Tray Cabinet Organize materials or assign separate storage with this mobile tote tray cabinet with a durable 1" bottom. It holds up to 24 totes. 4" locking swivel casters allow the cabinet to be moved easily or just set aside when not needed. The unit can be ordered with locking doors or as an open cabinet.
Mobile Storage Classic Mobile Demo Table Constructed from select maple and maple veneers with a chemical resistant, earth-friendly UV finish. It features unbreakable aluminum sliding door glides and lock. Edges of the 1-1/4" plastic laminate top are bound with a plastic-T molding. Includes an inlet and duplex outlet, 25' extension cord and two adjustable shelves. With a mobile capacity of 500 lbs. Extended Top: 72"W x 24"D. Weight: 230 lbs.
Robotic Accessories Bench Vise This sturdy vise is a 4-1/2" swivel base vise is ideal for the Robotics Bench. The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle Magnetic Tool Holder assembly and a chrome lockdown. The vise can be rotated up to 240 degree Magnetic Tool Holder can be used to organize hammers, wrenches, screw- on its base for work positioning. The built in pipe jaws allow holding small pipes drivers and more.
Robotics Robotic Workbench Robotic team storage for three robots and supplies. The maple plywood workbench The 1-1/4" ShopTop® can be extended an extra 8" by raising it and locking. Lowering provides three separate storage compartments. Each compartment has a rollout the extension allows the unit to fit through standard doorways and moves easily on six shelf which holds up to an 18" square robot. Also, within the compartment is a 4" heavy-duty, locking casters.
Robotics Robot Compartment Storage This mobile robotics storage cabinet offers storage for six competition size robots. This maple plywood storage cabinet provides six separate storage compartments. Each of the six compartments has a fixed shelf which holds up to an 18" square robot. The solid doors are outfitted with a secure 3 point locking handle. This cabinet is constructed with a 1" thick bottom for security and durability.
Mobile Demonstration Units Interactive Mobile Media Cabinet A unique mobile cabinet that allows the user to store, move and use many electronic devises at one time. The unit has Fold-down Monitor Display ample storage with two dovetailed drawers and cabinets with adjustable shelves for things like projectors, printers, laptops, and general supply items. The 3/4" phenolic resin top is both chemical resistant and easy to clean.
Mobile Demonstration Units ADA Mobile Lab Unit Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish.
Mobile Demonstration Units Mobile Laboratory Unit A fully equipped, locking self-contained demonstration unit. It features, a sturdy 1-1/4" plastic laminate top with durable drop leaf extensions. Constructed from select oak and oak veneers with chemical resistant, earth-friendly UV finish. It features unbreakable aluminum sliding door glides and lock. The unit comes standard with a stainless steel sink, and a hand pump. A GFI protected AC duplex electrical outlet is built into the lab.
Mobile Demonstration Units Extra-Large Mobile Demo Center Self-contained demo center is constructed of quality solid hardwood, and oak veneers with a chemical resistant, earth-friendly UV finish. Features one file drawer with full extension glides, 3 smaller drawers (all dove-tailed) and two cupboard spaces with locks and wire pulls. The drawers run on epoxy-coated steel glides with nylon rollers. This demonstration center rolls easily on 4" locking swivel casters.
Mobile Demonstration Units Economy Mobile Lab Table Constructed from select oak and oak veneers with a chemical resistant, earth-friendly UV finish. It features unbreakable aluminum sliding door glides and lock. The 1-1/4" plastic laminate top is bound with a Plastic-T Molding.
Specialty Augmented Reality Sandbox This amazing sandbox uses 3D visualization applications and a hands-on exhibit combining a real sandbox, virtual topography and water created using a closed loop of a Microsoft Kinect 3D camera, powerful simulation and a Linux computer and data projector. The resulting (AR) sandbox allows users to create topography models by shaping real sand, which is then augmented in real time by an elevation color map, topographic contour lines, and simulated water and lava.
Specialty Hydroponics Growing Center Self contained ebb and flow hydroponics growing system. The perfect way to learn how plants can grow without soil and helps teach the basic concepts for the plants needs, nutrition, food production, recycling, agricultural technology and soil-less growing environments. This mobile hydroponics center includes grow lights and water pump. The adjustable timers enable you to grow your plants with the perfect amount of water and sunlight.
Specialty Mobile Clay Cart Clay Wedging Table Sturdily constructed of maple plywood, this clay cart will provide years of service. This wedging table was developed with teacher input. It has a solid maple apron The inside has a removable liner; top is fitted with piano hinge, and recessed pull. and legs. But the real feature is the top. The top is a 1-1/4" ChemGuard covered The top can remain open while class is in session. Made to roll easily on casters. with a canvas.
Specialty Sculpture Ware Cart This versatile drying and damp cabinet lets you eliminate the plastic bag mess associated with ceramics and pottery drying. You can control how fast your ceramics dry by how much you open the heavy vinyl, zippered cover. This peninsula style cart is constructed of maple veneers and finished with a moisture resistant finish. Each side of the cart has three epoxy coated, grid-style shelves, which can be adjusted to your needs and an epoxy coated drip pan on the bottom shelf.
Specialty Canvas Door Display Cabinet Storage and display space combined! This unique storage cabinet gives you lots of storage space without losing any display area. The locking maple cabinet has a fixed bottom and middle shelf and four adjustable shelves. All the shelves are 1" thick and can hold up to 40 lbs. per square foot. The doors of the unit are framed and covered with a black canvas mesh. The entire door area can be used to hang artwork or posters.
Specialty Wood Lumber Rack Designed for the efficient storage of lumber. Unit constructed of solid ash framing and interlocked uprights. Unit includes 28 each 1-1/4" diameter 20" long iron pipes, which are located for correct lumber support. Assembly required. ITEM # LR-13W SIZE 151-1/2"W x 32"D x 6'H Mounting hardware is not included; must be mounted to the wall. Lumber/Plywood Storage Rack Create your own custom rack to store lumber and plywood.
Specialty Metal Lumber Rack Designed for efficient storage of lumber. Constructed of four individual steel upright frames, ITEM # SIZE all welded construction, free standing. Unit provides one shelf 38"D and four shelves 20"D. LR-12M 12'W x 42"D x 8'H Each shelf has a maximum capacity of 400 lbs. Primed: Gray Mounting hardware is not included; must be mounted to the wall. Vertical Storage Rack Triangular design for storage of lumber, pipe, rods, etc. Constructed of heavy gauge metal.
Seating Art Bench Art Horse This sturdy bench can be used in art rooms, libraries and wherever you want a solid This art horse is not only beautiful, but sturdy. Designed for student comfort with a place for people to sit. Available in two heights, 17" and 26"H, the unit is made of 3/4" grooved 15" seat that accommodates up to 24" x 30" drawing boards. Constructed solid maple. A built in shelf provides a handy place to store books and papers.
Move MOVE Cabinets Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black powercoated, 16-gauge steel support frame with nylon adjustable floor glides.
Casework Oak Casework (Shown with optional top and base molding) Maple Casework (Shown with optional top and base molding) Base Cabinets—Choose from oak or maple solid hardwood Epoxy or Phenolic Tops—Solid 1" Epoxy Resin or 3/4" Solid Phenolic Tops: and veneers. Base cabinets with choice of three styles: Door cabinet, door/drawer These solid tops provide superior chemical resistance. Tops include 4" back splash. cabinet or drawer cabinet.
1 5 2 6 3 1 2 3 4 4 Cabinets CONSTRUCTED OF SOLID OAK, AND HARDWOOD VENEERS USING DOWEL CONSTRUCTION Drawer Glided EPOXY COATED AND HAVE 70 LBS. OR MORE CAPACITY Casters UNITS WITH CASTERS HAS FOUR 4" HEAVY DUTY SWIVEL CASTERS WITH BRAKES Drawers FEATURE FULL DOVETAIL CONSTRUCTION.
Choose Your Top/Surface FOR GRADE SCHOOLS OR LECTURE AREAS 1-1/4"ARP HIGH PRESSURE PLASTIC LAMINATE Widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. It is superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb.
300 S Krueger Street - Suring, WI 54174 877.348.9663 / 920.842.2136 Fax: 920.842.2499 E-Mail: Info@DiversifiedWoodcrafts.com Web: DiversifiedWoodcrafts.com www.facebook.com/divwoodcrafts www.youtube.
