Installation Instructions

Attaching dense blanket or rigid insulation for parking garages,
fireproofing, foundation walls, and soundproofing.
GRID-MATE
Mechanical Fasteners
Low profile design seats flush.
“Keying W
indow” provides a strong bond with all coatings.
Climacoat
®
and Climaseal
®
fasteners.
Available with stem for time saving pre-spotting
of the plate.
Product Specifications
The original mechanical fastening system for Polymer Modified
(PM) and Modified PB EIFS.
Diameter.................1-3/4''
Plate
1-3/4''
Plate with stem
Material...................White polypropylene
Modified Stucco Systems.
Expanded lath over rigid insulation.
Fabric and wire mesh over rigid insulation.
Attaching rigid insulation to wood, steel, masonry, or concrete.
™
Part No. 2115900
Part No. 21
17900
51
GRID-MATE PB
Mechanical Fasteners
The ultimate fastening system for all Polymer Based (PB)
Barrier and Water Managed EIFS.
™
Applications
Product Features
Grid-Mate
All Polymer Modified (PM) Systems.
Grid-Mate PB Attaching expanded polystyrene insulation to
all substrates for all Polymer Based (PB) Exterior Insulated Finish
Systems (EIFS).
Grid-Mate Grid-Mate PB
Grid-Mate
Diameter.................2” Round
Material..................White polypropylene
Grid-Mate PB
Closure fingers keep coating out of contact with fastener
head - no sink marks or bleed throughs.
2” diameter resists and distributes wind loads for
a secure system.
Climacoat and Climaseal fasteners.
Part No. 2189900
EXTERIOR INSULATED FINISH SYSTEM APPLICATIONS PR
ODUCT
REPOR
T
NO. 060403