Brochure

800.995.2222
E
L
E
C
T
R
I
C
A
L
130
For use with metallic and non-metallic liquid tite
conduit, Type B. Provides smooth connection, no
sharp edges to strip wire. Wiring easily pulled through.
U. L. Listed. C.U.L. Listed.
750-NMLT50 1/2” Non-Metallic Straight Connector 25
750-NMLT4550 1/2” Non-Metallic 45 Degree Elbow Connector 10
750-NMLT9050 1/2” Non-Metallic 90 Degree Elbow Connector 10
750-NMLT75 3/4” Non-Metallic Straight Connector 10
750-NMLT4575 3/4” Non-Metallic 45 Degree Elbow Connector 10
750-NMLT9075 3/4” Non-Metallic 90 Degree Elbow Connector 10
750-NMLT100 1” Non-Metallic Straight Connector 5
750-NMLT90100 1” Non-Metallic 90 Degree Elbow 5
750-NMLT150 1-1/2” Non-Metallic Straight Connector 5
750-NMLT90150 1-1/2” Non-Metallic 90 Degree Elbow 5
750-NMLT200 2” Non-Metallic Straight Connector 5
750-NMLT90200 2” Non-Metallic 90 Degree Elbow 5
750-MLT50 1/2” Metallic Straight Connector 25
750-MLT9050 1/2” Metallic 90 Degree Elbow 10
750-MLT75 3/4” Metallic Straight Connector 10
750-MLT9075 3/4” Metallic 90 Degree Elbow 10
Liquid Tite Connectors
750-SLTC50 1/2” Straight Screw-On Fitting 25
750-SLTC9050 1/2” 90° Screw-On Fitting 25
750-SLTC75 3/4” Straight Screw-On Fitting 25
750-SLTC9075 3/4” 90° Screw-On Fitting 25
Single Piece Liquid Tite Fittings
CATALOG NO. DESCRIPTION STANDARD PACK
CATALOG NO. DESCRIPTION STANDARD PACK
Conduit threads onto ferrule and up inside the outer
body. An inside taper squeezes down on the outside
of conduit for a superior liquid tight seal. The cut
portion of the conduit does not show, giving a more
finished appearance. Easy to use at a lower cost than
regular liquid tite fittings.
750-RC841 3/8” Romex Connector for 1/2” Knockouts 100
750-RC842 3/4” Romex Connector for 3/4” Knockouts 50
U.L. Listed and C.S.A. Approved.
Romex Connectors – Metallic
750-RC842
CATALOG NO. DESCRIPTION STANDARD PACK
Cable connectors for Romex Wire. Zinc die-cast.
CON D U IT, FIT TI NGS, CABLE
750-12100
750-12100 1/2” x 100’ Liquid Tite Conduit – Non-Metallic 100’ Roll
750-34100 3/4” x 100’ Liquid Tite Conduit – Non-Metallic 100’ Roll
750-10100 1” x 100’ Liquid Tite Conduit – Non-Metallic 100’ Roll
750-1550 1-1/2” x 50’ Liquid Tite Conduit – Non-Metallic 50’ Roll
750-2050 2” x 50’ Liquid Tite Conduit – Non-Metallic 50’ Roll
750-500 1/2” x 100’ Liquid Tite Conduit – Metallic 100’ Roll
750-600 3/4” x 100’ Liquid Tite Conduit – Metallic 100’ Roll
Liquid Tite Flexible Conduit
CATALOG NO. DESCRIPTION STANDARD PACK
Specifically for electrical applications. For outside,
inside and industrial uses including transformer
connections, air conditioning and heating. Joins
with metallic or non-metallic connectors, easy to
cut. Conduit is impact resistant, chemical resistant
and will not kink. U.L. and C.U.L. Listed. For use as
indicated in Article 351 of the 1987 NEC.
640-845 Trade Size – 3/8” 100
BX Set Screw Connectors
640-845
CATALOG NO. DESCRIPTION STANDARD PACK
BX cable range = .445 to .630 diameter. U.L. Listed.
CSA Approved.
640-122 12-2 Aluminum Armored MC Cable – 100’ Roll 1
640-123 12-3 Aluminum Armored MC Cable – 100’ Roll 1
640-142 14-2 Aluminum Armored MC Cable – 100’ Roll 1
640-143 14-3 Aluminum Armored MC Cable – 100’ Roll 1
Aluminum Armored MC Cable
620-122
CATALOG NO. DESCRIPTION STANDARD PACK
90°, C Rated aluminum metal clad cable system.
THHN solid copper with specially compounded
heat-resistant U.L. Listed insulation and jacket.
Flexible interlocked aluminum armor. Extremely
durable – withstands severe handling. U.L. Listed
#4. Conforms to NEC article 333.
625-800 Set Screw Connector – 1/2” 50
625-801 Set Screw Connector – 3/4” 25
625-304 Strap-One Hole – 1/2” 100
625-305 Strap-One Hole – 3/4” 100
625-810 Set Screw Coupling – 1/2” 50
625-811 Set Screw Coupling – 3/4” 25
EMT (Thinwall) Fittings
CATALOG NO. DESCRIPTION STANDARD PACK
625-800
625-810
625-304
750-MLT50
750-NMLT50
750-NMLT9050
750-SLTC9050
750-SLTC50