Product Overview
www.diversitech.com
1.800.995.2222
BP-46 and BP-46-230 Condensate Pump
High Temperature/High Performance Condensate Pump
The DiversiTech Boiler Pump is designed to automatically remove
the water produced by condensing furnace and boilers that
produce high temperature condensate. Can also be used for air
conditioning evaporation coils, especially when high li is
required. These pumps can also be used for other types of fresh
water removal from refrigeration equipment, dehumidiers, water
dispensers, etc. where gravity drainage is impossible.
With a 1 gallon tank, this pump is constructed from a heat resistant
plastic and can handle water temperatures up to 212˚F. This
pump incorporates thermal overload protection and a indepen-
dent high level alarm switch / boiler interlock. The check valve to
prevent condensate owing back into the pump and odours from
drain pipes.
• Suitable for condensate up to 212°F
• Independent high-level safety switch
• Maximum ow 204 gal/hr
• Maximum head 46’
• Withstands acidic condensate down to 2.8ph
• Suitable for condensate up to 212°F
• BP-46 : 115VAC 60Hz
• BP-46-230 : 230VAC 60Hz
• 240VAC 3A Dry Contact
• USA 3-Prong molded plug (120VAC)
• NEMA 6-15 plug (230VAC)
• 46’ Vertical Li
• BP-46 & BP-46-230 : 204 gal/hr
• BP-46: L:12.8” x W:6.3” x H:9.8”
• 3/8”
• BP-46: 1 Gallon
• Installed Independent High Level Safety Switch
• 2 Years
Product
Application
Purpose
Advantages
Features
Maximum Condensate
Temperature
Rated Voltage
Alarm Contact Ratings
Input Type
Maximum Li Height
Flow Rate @ Zero Head
Dimensions
Discharge Line
Tank Capacity
Included Accessories
Warranty
Height Inlet Height Inlet Size Length Width Weight Cable Length
9.8 in 4.5 in 1.2 in 12.8 in 6.3 in 6.8 lbs 5.9
Alarm Level
BP-46
BP-46 - 230
Model
Tank
Capacity
Drink
Cycle
On
Level
O
Level
Reserve
Before
Overow
PRV Discharge should be routed through tundish before entering the pump.
1 gal 0.39 gal 2.24 in 0.75 in 0.18 gal 4.2 in
TECHNICAL DATA SHEET
Boiler Pump
DOC30615