Specification Sheet

TECHNICAL DATA SHEET

January 2011t

Product

Pro-Red Plus

Features

• Cleans and brightens

• Vigorous foaming action

• Non acid formula

Benets

• Leaves the coil clean and bright equal to or better than

traditional acid formulations.

• Rapidly penetrates and loosens soil. Expanding foam

extends contact time and lis soil located deep within

the coil. Foam and dirt are easily rinsed with water.

• Does not contain hazardous hydrouroic acid. The

product is non fuming and is non corrosive to ferrous

metals.

Application

Pro-Red Plus™ is a complete, non-acid foaming cleaner

and brightener for condenser coils. Pro-Red Plus™ will

loosen even the most stubborn soils and allow them

to easily rinse away. This highly alkaline solution makes

cleaning condenser coils fast and easy.

MIX RATIO

1:3 Maximum Foaming and Soil Liing : Mix 1 part Pro-

Red Plus™ with 3 parts water.

1:10 Moderately Dirty or Greasy: Mix 1 part Pro-Red Plus™

with 10 parts water.

Directions

1. For outdoor use only. Wear protective goggles and gloves. Avoid breathing spray mist or vapors.

2. Apply with a chemical resistant sprayer adjusted for coarse spray to minimize misting.

3. Mix one part Pro-Red Plus™ with three parts water to achieve maximum foaming and soil liing action.

For moderately dirty or greasy condenser coils, Pro-Red Plus™ is eective when mixed with up to ten

parts water.

4. Shut system o, then spray the Pro-Red Plus™ solution into the coil ns from the bottom up.

5. Allow three to ve minutes to achieve maximum foaming and cleaning, then thoroughly ush the coil

with clean water. Aer use, thoroughly rinse sprayer with clean water.

6. Return the system to service.

Pro-Red Plus

Page 1 of 1

www.diversitech.com