Technical data

Ichill 200CX EVO rev 1.1 14/11/2013
Pag. 149 of 151
54. ELECTRICAL CONNECTIONS
The instrument is provided with:
• 2 removable terminal blocks MOLEX MICROFIT 14 and 18 ways for power supply voltage / digital and
analogue inputs and modulating outputs
• 1 removable terminal blocks AMP 12 ways for the relay outputs
• 5 ways connector for TTL RS485 interface outputs
Wiring cables:
CWCXA15-KIT IC206CX 1.5mt
CWCXA30-KIT IC206CX 3.0mt
CWCXB15-KIT IC208CX 1.5mt
CWCXB30-KIT IC208CX 3.0mt
Wire size:
• signal cable AWG 24
• power supply cable AWG 22
• relay output AWG 17
General notes:
• Check the connecitons and the line voltage before turning on the power supply.
• Keep low voltage cables, such as analogue/digital inputs/outputs and probes, away from power cables
and terminals.
• Respect the maximum load current of each relay output, in case of power loads use filtered contactors.
55. ACCESSORIES
55.1 MONOPHASE FAN CONTROL: 230VAC AND CUT PHASE CONTROL
Models XV05PK XV10PK XV22PK
Power 500W 1000W 2200W
Ampere 2A 4A 9.5A
Power supply
230Vac Input
0 - 230Vac output
-10 - 65°C Operating temperature