Technical data

Ichill 200CX EVO rev 1.1 14/11/2013
Pag. 7 of 151
3. USER INTERFACE
Meaning of the LEDs
Display and Icons
ICON MEANING / FUNCTIONNING
°C -°F BAR-
PSI
ON when a temperature or pressure is visualized
ON when the compressor is active
Blinking = when a compressor activation is delayed (minimum OFF time, delay after
water pump activation, etc.)
General alarm: blinking in case of alarm
Anti freeze heaters/ integration heating / boiler: ON if the heaters are switched ON
Water flow alarm / supply fan overload (air / air unit): blinking in case of water flow alarm
or supply fan overload alarm
Real time clock: ON when the bottom display show the RTC
ON during the programming with time based parameter value
In function menu indicates the defrost delay counting
Water pump: ON if at least one water pump is actives or if supply fan is active
Condenser fan: ON if at least one condenser fan is active