User manual

1592022700 User manual iCHILL 200CX Rel. 1.0 22/04/2009
Pg.58/114
Example of a daily programming:
Monday
Enater parameter programming
1. In the ES parameter family, select the parameter ES07, the top display shows 0 - 0
2. Push SET key: the top display shows 0 - 0 blinking, with UP or DOWN keys select the corresponding function (see next table) :
3. Push SET to confirm.
4. Push SET + UP to exit the programming or wait the programming timeout.
MONDAY X = 0 - Y= 0: The energy saving and the unit on/off are both disabled:
MONDAY X = 0 - Y= 1 energy saving is disabled, and unit on/off will follow the first RTC period ES1..ES2.
MONDAY X = 3 - Y= 7: energy saving enabled during the 1
st
and 2
nd
RTC periods, unit on/off enabled during the 1
st
, 2
nd
3
rd
periods.
WEEKLY PROGRAMMING
Repeat the daily programming for the other days of the week using parameters ES08..ES13.
34.5 UNIT ON/OFF ACTIVATION WITH RTC PROGRAMMING AND DIGITAL INPUT
If this “Digital input selection functioning with RTC or keyboard” is configured and inactive enables operation through the internal clock,
the unit is running only inside the time band.
If the unit is in OFF by RTC and Par. ES18 ≠ 0 if the unit will be to start by keyboard the unit should be wort still for the time to set up in
ES18.