INSTALLATION GUIDE Ver 1.
WARNING: Use only modems supported by this monitoring units. Dixell S.p.a can accept no responsibility for possible damage due the usage of not supported modems. WARNING: Dixell S.p.a. reserves itself the right to alter this manual without notice. The last version available can be downloaded from the website.
INDEX 1 2 3 CHECK LIST .............................................................................5 TO DO LIST ..............................................................................6 RS 485 CONNECTION .............................................................7 3.1 The TTL output ......................................................................9 3.2 Serial address of the instruments ..........................................9 4 Local connection with monitor, mouse and keyboard.............
XWEB SERIES Installation Guide 1 CHECK LIST • • • • • • The XWEB 3000 server unit. One power cord for power supply connection. A couple of brackets. Quick reference manual (Fast installation). One serial line adapter One CD Rom containing the Operating manual and software 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 2 TO DO LIST • • • • Check if the power supply line match the XWEB 3000 specification (90~264 VAC 50~60Hz.). Connect the serial line RS 485 with the adapter provided. Plug-in monitor, keyboard and mouse (if needed) before turning on the unit. Plug-in RJ 45 network cable (not provided). Pg.
XWEB SERIES Installation Guide 3 RS 485 CONNECTION To be connected to the serial line all the Dixell Modbus instruments must be provided with direct RS485 terminals or the “TTL”-RS485 interface (XJRS485 or XJ485). Check the instrument manuals for more information. The RS485 line is mainly based on two polarised terminals. Please beware to respect the right sequence for all the devices connected to the serial line.
XWEB SERIES Installation Guide Right connection: Wrong connection: • • • • • • • Always keep the serial cable away from power cables. Always keep the serial cable away from Electro-magnetic or frequency sources. Do not connect shield to ground. Do not connect the “Gnd” terminal. Remember to draw a map of the line. This will help you to find errors if something is wrong. The instrument with RS485 have “+” and “-“ terminals, respect the polarity.
XWEB SERIES Installation Guide 3.1 The TTL output The instrument with RS485 on board do not need any kind of external interface module. For instruments with external interface: keep the TTL cable away from power cables or frequency sources. The XJ485 external interface must be connected with TTL cable to the instrument with TTL compatibility. 3.2 Serial address of the instruments Each instrument must be defined by its unique address. Check the address into the Adr parameter value.
XWEB SERIES Installation Guide 4 Local connection with monitor, mouse and keyboard On the back side, the XWEB 3000 is provided with the sockets for a monitor, a mouse and a keyboard. Please connect all the peripherals before powering-on the unit otherwise the system may fails to recognise them. This means that , for example, if you do not plug the monitor cable now, you won’t see anything displayed on it later.
XWEB SERIES Installation Guide It is possible to connect to the unit via a single PC provided with LAN card, by using the net connector RJ 45 (LAN). Due to the PCclient power, this kind of connection is more suitable for the setup procedures. IMPORTANT: the cable between the Server and the PC must be with crossing wires (“Bridge Cable”). The connection procedure from the remote PC is describe in deep in this guide.
XWEB SERIES Installation Guide 4.1 HOW TO SETUP YOUR NETWORK CARD Windows 98 and ME TCP/IP Setup Windows 2000 TCP/IP Setup Windows XP TCP/IP Setup pg.12 pg.16 pg.18 4.1.1 WINDOWS 98 AND ME TCP/IP SETUP On the desktop, select My Computer -> Control Panel -> Network. Choose the Configuration tab. Highlight the TCP/IP associated with your Ethernet card and choose Properties. The TCP/IP Properties window will open. On each tab, Pg.
XWEB SERIES Installation Guide make the following settings. Choose the IP Address tab. Select radio button “Specify an IP address” and compile the fields as the image above. Then go to the DNS tab an choose the radio button “Disable DNS”. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide Go to gateway and delete any entry. Pg.
Push Ok button, Windows will ask you to make a reboot. Choose ok and wait while system is rebooting.
4.1.
XWEB SERIES Installation Guide Right-click the network connection associated with your network card, and then click Properties. The following window should appear: Select “Internet Protocol (TCP/IP)”, then properties. The following window should appear: 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide Select radio button “Use the following IP address” and compile the fields as the image above. Push “OK” button 4.1.3 WINDOWS XP TCP/IP SETUP Pg.
XWEB SERIES Installation Guide Click on Start button, chose Control panel, click on “Network and internet connections” icon: Then chose “Network connections”: The following windows will appear: Right mouse click on network interface icon, then chose “Properties”: 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide The following windows will appear: Pg.
XWEB SERIES Installation Guide Select “Internet Protocol (TCP/IP)”, then click on Properties. The following windows will appear: 04/11/2004 1592017000 Pg.
XWEB SERIES Pg.
XWEB SERIES Installation Guide 5 Modem connection (“or point to point connection”) It represents the most common method where the LAN (intranet / Ethernet / internet) is not available. It is strongly advised to use a dedicated telephone line. IMPORTANT: Use exclusively modem devices approved by Dixell. Remember that many modems are not compatible with Linux. The list of compatible models can be found under the menu: Configuration – System - Modem. USB Modem (recommended).
XWEB SERIES Pg.
XWEB SERIES Installation Guide 5.1 HOW TO SETUP a dial-up connection Setting up dial-up connection for windows 98 Setting up dial-up connection for windows me setting up dial-up connection for windows 2000 SETTING UP dial-up connection for windows XP pg.25 pg.31 pg.39 pg.52 5.1.1 SETTING UP DIAL-UP CONNECTION FOR WINDOWS 98 1. Double-click on the "My Computer" icon on your Desktop, then double-click on "Dial-Up Networking". 2.
XWEB SERIES Installation Guide 3. If you don' t get the Welcome screen, double-click on "Make New Connection". Pg.
XWEB SERIES Installation Guide 4. Type “XWEB 3000 DIRECT MODEM” in the first box. When you finish the New Connection wizard, the connection icon will be named “ XWEB 3000 DIRECT MODEM ”. Chose “digicom Botticelli web” or another modem approved dy Dixell. Click “Next". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 5. Do not type the area code, insert telephone number with the area code of XWEB 3000 as a prefix. E.G: If telephone number is 555789 and area code is 099, put this Telephone number: 099555789. If there is a switching machine and you have to dial a digit to get the line ( 0 or 9 for example, it depends on the switching machine), put this telephone number: 0, 099555789 or 9, 099555789. Chose your country. Click "Next". Pg.
XWEB SERIES Installation Guide 6.Click "Finish". 04/11/2004 1592017000 Pg.
XWEB SERIES Pg.
XWEB SERIES Installation Guide 5.1.2 SETTING UP DIAL-UP CONNECTION FOR WINDOWS ME 1. From the Start menu, click Settings, and choose Dial-Up Networking. 2. Double-click the Make New Connection icon. 3. In the Type a name for the computer you are dialling field, type XWEB3000 DIRECT MODEM. 4. Click the down arrow on the Select a device drop-down list and choose “digicom botticelli web” or another modem approved dy Dixell. 5.Click the Next button. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 6. Do not type the area code, insert telephone number with the area code of XWEB 3000 as a prefix. E.G: If telephone number is 555789 and area code is 099, put this Telephone number: 099555789. If there is a switching machine and you have to dial a digit to get the line ( 0 or 9 for example, it depends on the switching machine), put this telephone number: 0, 099555789 or 9, 099555789.Chose your country. 7.Click the Next button. Pg.
XWEB SERIES Installation Guide 8. Click the Finish button. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 9. Click the XWEB 3000 DIRECT MODEM icon with your right mouse button, then choose Properties. 10. Click on the Networking tab. 11. Click the down arrow on the Type of Dial-Up Server: drop-down list and choose PPP: Internet, Windows 2000/NT, Windows Me. 12. Uncheck all the boxes except for Enable software compression and TCP/IP. Pg.
XWEB SERIES Installation Guide 13. Click the TCP/IP Settings... button. 14. Select Server assigned IP address 15. Select Server assigned name server addresses. 16. Click the OK button. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 17. Click on the Security tab. 18. In the User name: dixell 19. In the Password: dixell 20. Click the OK button. Pg.
XWEB SERIES Installation Guide 21. Click the XWEB 3000 DIRECT MODEM icon with your right mouse button, then choose Create Shortcut. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 22. Click the Yes button. Pg.
XWEB SERIES Installation Guide 5.1.3 SETTING UP DIAL-UP CONNECTION FOR WINDOWS 2000 Start-Menu "Settings", then "Network and Dial-up Connections". Select to "Make a New Connection" 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide This starts up the "Network Connection Wizard". Continue with "Next" Pg.
XWEB SERIES Installation Guide Chose “Dial up to the Internet" 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide Choose “Connect using my phone line”: Pg.
XWEB SERIES Installation Guide Do not type the area code, insert telephone number with the area code of XWEB 3000 as a prefix. E.G: If telephone number is 555789 and area code is 099, put this Telephone number: 099555789. If there is a switching machine and you have to dial a digit to get the line ( 0 or 9 for example, it depends on the switching machine), put this telephone number: 0, 099555789 or 9, 099555789.Chose your country. Click the Next button. 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide The User name and Password is dixell. Pg.
XWEB SERIES Installation Guide As connection name use “XWEB 3000 direct modem”: 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide First part is done. Pg.
XWEB SERIES Installation Guide Now you will found a new icon in your network directory: 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide Right mouse click and choose properties: Pg.
XWEB SERIES Installation Guide Let general tab as you compile before in this guide choose “networking” tab: 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide Select Internet Protocol (TCP/IP) and click on “Properties”: Pg.
XWEB SERIES Installation Guide Compile your windows as describe above. Click ok and close all windows. 04/11/2004 1592017000 Pg.
XWEB SERIES 5.1.4 Installation Guide SETTING UP DIAL-UP CONNECTION FOR WINDOWS XP In Windows XP, you will use the "New Connection Wizard". 1. From the Start menu, select Control Panel. 2. If Control Panel is set for "Classic View", double-click on the Network Connections icon. Pg.
XWEB SERIES Installation Guide 3. If Control Panel is set for "Category View", select the "Network and Internet Connections" category, then double-click on the Network Connections icon. 04/11/2004 1592017000 Pg.
XWEB SERIES Pg.
XWEB SERIES Installation Guide 4. Under Network Tasks, select "Create a new connection". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 5. Click "Next". Pg.
XWEB SERIES Installation Guide 6. Click "Next" at the bottom of this page to continue with the setup instructions. 7. Select "Connect to the Internet" and click "Next". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 8. Select "Set up my connection manually" and click "Next". Pg.
XWEB SERIES Installation Guide 9. Select "Connect using a dialup modem" and click "Next". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 10. Type "XWEB 3000 DIRECT MODEM" in the ISP Name box and click "Next". Pg.
XWEB SERIES Installation Guide 11. Type the access number in the Phone Number box. E.G: If telephone number is 555789 and area code is 099, put this Telephone number: 099555789. If there is a switching machine and you have to dial a digit to get the line ( 0 or 9 for example, it depends on the switching machine), put this telephone number: 0, 099555789 or 9, 099555789. Click "Next". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 12. Type dialup account name dixell in the User Name box. Type dialup password dixell in the Password and Confirm Password boxes. We recommend that you check the first 2 checkboxes, but not the 3rd box which turns on the Internet Connection Firewall. Click "Next". Pg.
XWEB SERIES Installation Guide 13. Place a checkmark in the box to create a shortcut on your desktop, and click "Finish". 04/11/2004 1592017000 Pg.
XWEB SERIES Installation Guide 14. You are now ready to connect to your XWEB 3000. If you want to dial your XWEB 3000 DIRECT MODEM connection automatically when you start Internet Explorer, do the following. Start Internet Explorer, and select "Internet Options" from the "Tools" menu. Select the "Connections" tab. Make sure that XWEB 3000 DIRECT MODEM is your default connection (if not, highlight it and click "Make Default"). Make sure that the "Always dial my default connection" option is selected. Pg.
XWEB SERIES 04/11/2004 Installation Guide 1592017000 Pg.
XWEB SERIES Installation Guide 6 Intranet / ethernet connection The Intranet or Ethernet connection should be initially managed by the net administrator which will assign one free IP address to reach the Server. This number is an example of what you should expect: http://192.168.000.111. After receiving the address from your network Administrator the XWEB 3000 must be set with this number. REMEMBER: A setup wizard will guide you through the procedure.
XWEB SERIES Installation Guide Ask your provider for more details about the rent of a the static IP. This the internet system requirements for the best result: Wide band connection. At least 1 static IP addresses for the XWEB 3000. The internet connection is established through a device called Router that receives and sends the data as interface between an Intranet and Internet. The Provider also assigns the address of the router that is called IP WAN.
XWEB SERIES Pg.
XWEB SERIES 04/11/2004 Installation Guide 1592017000 Pg.
XWEB SERIES Installation Guide Troubleshooting Guide Problem The log-in page doesn’t load My password doesn’t allow me to log-in. My browser can’t reach XWEB 3000 log-in page Someone in the intranet/LAN receive a warning message about an IP conflict. Pg. 70/74 Solution Check your browser setup. Beware to the caps-lock button an capitol letters. Is it your password correct? Check cable typology From windows go to Start->Run… ping 192.168.0.200 –t A continuous set of information should be appear.
XWEB SERIES Installation Guide Unit Setup Reminder Please take some moments to make an hardcopy of this page, then compile it and store it near XWEB 3000 unit.
XWEB SERIES Installation Guide Notes ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ _________________________________
XWEB SERIES QUICK REFERENCE GUIDE
XWEB SERIES Installation Guide ! "# $ "% & ' ( ) ('* ( + & ' ( ) , (- . / 0 - ( 1 .223 3 3 Pg.
