Installation manual

1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28 58/100
3.4.5 DEW POINT MANAGEMENT (SOLO XWEB5000)
The Dew-Point managing concept enables the XWEB-EVO to act on the adjustment of the anti-sweat
heaters in order to reduce their electricity consumption.
The XWEB-EVO acts on the XM600 controllers, to which the Dew-point temperature set-point is sent.
Condensation builds up on the controlled bench window surrounding the system. These controllers are
defined in the configuration of a class. Each engine can manage a class. Each engine may relate to different
zones of the system where work is to be carried out with different settings and parameters.
All of the following configurations are part of the dew-point project that will be run by the system if at least
one of the dew-point engines is activated.
 Class Configuration
To create a class, access the menu “ClassCreate Class”.