User Manual
Cam & Groove Holedall Couplings
customer service 800•355•1991
9Section 5
100 Ton Ram Instruction Manual
Position a rubber sheet or pad under the die bed.
While holding the die in place with one hand, loosen
the bolt on the tie down bar and move the tie down
bar so that it clears the die.
Slowly
slide the hose
towards the pusher . When the die clears the die
holder, one or both halves may fall to the floor. If
one half remains on the ferrule, tap it with a mallet
until it releases. If both halves remain on the ferrule,
it may require the halves be pried apart at the seam
Wipe excess lubricant from hose and ferrule. Bring
hose with stem and ferrule back through die bed.
13e
13f