User Manual

100 Ton Ram Instruction Manual
Cam & Groove Holedall Couplings
customer service 8003551991
4 Section 5
Lifting up the hose, insert one die half under the
hose. Lower the hose so that it rests on the die.
Insert the other die half. Make sure that the seams
of the die do not line up with the seams on the die
holders.
While holding the die in place with one hand, place
one of the tie down bars over the die so that it does
not come out of the die holder unexpectedly. Secure
the tie down bar by tightening the bolt.
For style "C" couplings go to step 12.
For style "E" couplings go to step 13.
11a
11b