Dixon Systems Stereo Rack Monitor Model RM-35 Owner’s Manual
Dixon Systems Model RM-35 Table of Contents Table of Contents 1 1-1 Description 2 1-2 Features 2 1-3 Technical Description 2 1-4 Unpacking and Inspection 3 1-5 Mounting 1-6 Heat Dissipation 3 1-7 General 3 1-8 Set Up 4 1-9 Amplifier Specifications 4 1-10 Schematic Diagram 5 1-11 Notes 6 1
Dixon Systems Model RM-35 1-1 Description: Dixon System’s RM-35 is a self contained, rack mountable, stereo amplifier and speaker monitor system designed to compliment the NM-250 Newsroom Mixer. The unit employs a high quality stereo audio amplifier driving two three by five inch shielded speakers, each in it’s own acoustically treated ‘enclosure’. The result is exceptional audio quality, very low distortion and outstanding stereo separation.
Dixon Systems Model RM-35 1-4 Unpacking and Inspection: Carefully examine the contents of the shipping carton for any sign of physical damage which could have occurred in transit. IF DAMAGE IS EVIDENT, DO NOT DESTROY ANY OF THE PACKING MATERIAL OR CARTON AND IMMEDIATELY NOTIFY THE CARRIER OF A POSSIBLE CLAIM FOR DAMAGE. SHIPPING DAMAGE CLAIMS MUST BE MADE BY THE CONSIGNEE.
Dixon Systems Model RM-35 1-8 Set Up: The RM-35 can be set up in a few easy steps. Once the unit has been inspected, slide and secure the monitor into the rack. Connect the audio signals via XLR or quarter inch TRS connectors. Plug the unit into the AC mains. (The RM-35 operates from 110VAC - 60Hz power.) Adjust the volume control on the rear panel. The RM-35 is designed to be driven by a balanced source at a nominal +4 dB level.
Dixon Systems Model RM-35 5
Dixon Systems Model RM-35 1-11 Notes: 6
Dixon Systems 580 Danforth Road Toronto, Ontario, Canada M1K-1E3 E-mail: helpdesk@dixonsystems.com URL: http://www.dixonsystems.
