User's Manual

- USB Powered
- 27 MIDI Messages
- 8 Selectable MIDI Channels
- 3 x 45mm Channel Faders and Crossfader
- Adjustable Crossfader Curve
- 9 x Push buttons - 7 Illuminated
- 8 x Rotary Knobs
- 3 x Rotary Encoders with “Push to switch” function
- Included DJ Software for MAC/PC: DECKADANCE LE
1. Power Connector - Plug in power adaptor here. DC adaptor can be used when the USB port
cannot provide enough power to the unit. Please use
only a 6V DC adaptor.
2. Power Switch (Adaptor / OFF/ USB power) - Set the
switch to adaptor when using the exclusive adaptor, set
to USB bus power when using power provided from the
computer via USB.
3. USB Socket - Used to connect a computer.
4. C.F Cur
ve Control - Adjusts the shape of the crossfader curve from a quick cut for scratching or to a
longer fade for mixing.
5. MIDI Out: Rotate the MIDIOUT knob to select MIDI channel from 1 to 8. Every time MIDI channel is
changed, the LED from “CUE/VINYL” to “Deck A PFL” will show the MIDI channel number.
1. Install the DJ software from the software CD included. Follow the instruction to finish the installation.
You may need to enter the serial number for the software during installation. The serial number can
be found on the paper pocket of the software CD.
2. Connect the MIX-101 to Computer USB port. Driver will be installed automatically. No Driver is
needed.
You can use the MIX-101 alone or use with other 101 series controllers (including VTT-101,
DJM-101 and CDJ-101) at the same time. Sample connection as below:
Not
e: If you are using a USB Hub for connection, it is recommended to use a Powered USB hub to
ensure the stability of the setup.
VTT-101:
Deck A
MIDI CH1
DJM-101:
Deck A&B
MIDI CH1
CDJ-101:
Deck B
MIDI CH2
MIX-101:
Deck A&B
MIDI CH1
Computer
Powered USB Hub
MAIN FEATURES
CONNECTIONS
CONNECTIONS
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
DUTCH
ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
DUTCH
2
1 2 3 4 5
Downloaded from www.Manualslib.com manuals search engine