User manual
Table Of Contents
- Disclaimer
- About
- Contents
- Cautions
- Legend
- In The Box
- Mounting the Landing Gear
- Mounting Frame Arms
- Mounting Electronics and Wiring
- Connecting XT60 Ports on the Center Frame
- Installing Battery
- Setting Up the Landing Gear
- Mounting the Gimbal
- Appendix
- FAQ
- Part List
- The FCC Certification Requirements
- Disclaimer
- About
- Cautions
- Legend
- In The Box
- Mounting the Landing Gear
- Mounting Frame Arms
- Mounting Electronics and Wiring
- Connecting XT60 Ports on the Center Frame
- Installing Battery
- Setting Up the Landing Gear
- Mounting the Gimbal
- Appendix
- FAQ
- Part List
- FCC Statements
©
2014 DJI. All Rights Reserved.
11
Mounting Electronics and Wiring
Eight positions are reserved for mounting a flight control system, wireless video transmission module,
receiver, and other accessories. The DJI A2 ight control system has been used here as an example. If using
an A2, follow mounting and wiring instructions found in the A2 ight control system user manual. If using
the DJI WK-M ight control system, please refer to the WK-M user manual for connections. Also be sure the
rmware on your DJI ight controller has been updated to the latest version.
Instructions
1. Attach IMU module to the IMU area of the center frame. Ensure that it points toward the nose.
2. Attach the PMU module to the center frame.
Only mount the IMU in the IMU position of the center frame.
3. Mount the ight controller in the reserved position near the PMU module.
Mounting Electronics and Wiring
IMU
I
A2 Flight Controller
Reserved Position