User manual
Table Of Contents
- Disclaimer
- About
- Contents
- Cautions
- Legend
- In The Box
- Mounting the Landing Gear
- Mounting Frame Arms
- Mounting Electronics and Wiring
- Connecting XT60 Ports on the Center Frame
- Installing Battery
- Setting Up the Landing Gear
- Mounting the Gimbal
- Appendix
- FAQ
- Part List
- The FCC Certification Requirements
- Disclaimer
- About
- Cautions
- Legend
- In The Box
- Mounting the Landing Gear
- Mounting Frame Arms
- Mounting Electronics and Wiring
- Connecting XT60 Ports on the Center Frame
- Installing Battery
- Setting Up the Landing Gear
- Mounting the Gimbal
- Appendix
- FAQ
- Part List
- FCC Statements
22
©
2014 DJI. All Rights Reserved.
Appendix
ESC Sound
ESC State Sound
Ready
1234567--B--B
Throttle stick is not at bottom BBBBBB…
Input signal abnormal B
--------
B
--------
B…
Input voltage abnormal BB
---
BB
---
BB
---
BB…
ESC LED
ESC State LED
Standby Off
Motor rotating Solid Red or Green On
Motor rotating at full throttle position Solid Yellow On
DJI ESCs are specifically designed for multi-rotors. When used with DJI autopilot systems
parameters and travel ranges do not have to be calibrated.
Specications
Frame
Diagonal Wheelbase 1045mm
Frame Arm Length 386mm
Frame Arm Weight
(with Motor, ESC, Propeller )
325g
Center Frame Diameter 337mm
Center Frame Weight (with Landing Gear
Mounting Base, Servos)
1520g
Landing Gear Size 460mm(Length)×511mm(Width)×305mm(Height)
Motor
Stator Size 41×14mm
KV 400rpm/V
Max Power 500W
Appendix