Owner's Manual

ȤTroubleshoot

ȤProduct notes

7. Reset

Press the pinhole on the back of the controller quickly with the paperclip,

to force the entire controller to power off once, and reboot.

8. Firmware upgrading(OTA)

Connect the controller through the mobile phone APP Bluetooth, to

process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App

download address: www.gamesirhk/t1d

1) After entering the upgrade mode, the LED keeps on Lantern Dance,

and waits for the upgrade.

2) After the upgrade is completed, turn off the machine and restart it

automatically.

1. When you can't start the machine, Maybe the built-in battery is out of

power. Please recharge the controller with the USB line and start up

again.

2. If the controller crashed or dropped please don't keep it far away from

the device, or reconnect.

3. Factory setting (reset): There is a small hole on the back of the

controller, press it down with a toothpick or other hard bar object, press

RESET key to restore the factory setting.

1. Avoid strong vibration, don't disassemble, refit, repair by yourself.

2. Avoid storing in humid, high temperature, fumes and other places

3. Avoid the water or other liquids entering the inside of the controller, it

may affect the controller function.

4. There are batteries inside, do not drop the controller into the fire, there

is a danger of explosion.

5. The charging voltage of this product is USB 3.7-5.5V DC power

supply (ordinary Android mobile phone charging power can be used

directly), otherwise it may not be able to charge or cause damage.

6. Children need to use this product in the custody of an adult.

7. If there is a quality problem or suggestion, please contact the seller or

after sales personnel, and see the contact information on the outer

packing.