User manual

©
2021 DJI All Rights Reserved.
9
AGRAS T10
User Manual
Make sure that the battery is rmly inserted into the aircraft. Only insert or remove the battery
when the aircraft is powered off.
To remove the battery, press and hold the clamp and lift the battery up.
Fold the M3 and M4 arms followed by the M1 and M2 arms and make sure that the arms are
inserted into the storage clamps on both sides of the aircraft. Otherwise, the arms may be
damaged.
Preparing the Remote Controller
Mounting the External Battery
To remove the Intelligent Battery, press and hold the battery release button and push the
battery downward.
Mounting the 4G Dongle and SIM Card
Only use a DJI-approved dongle. The dongle supports various network standards. Use a SIM
card that is compatible with the chosen mobile network provider and select a mobile data plan
according to the planned level of usage.
The dongle and SIM card enable the remote controller to access specific networks and
platforms such as the DJI Agras Management Platform. Make sure to insert them correctly.
Otherwise, network access will not be available.
1
Press the battery cover release button on the
back of the remote controller down to open the
cover.
2
Insert the Intelligent Battery into the compartment
and push it to the top.
3
Close the cover.
2
3
Battery Release Button
Remove the dongle compartment cover.
Make sure the SIM card is inserted into the dongle. Insert
the dongle into the USB port and test the dongle.*
Reattach the cover rmly.
Dongle