User manual

©
2021 DJI All Rights Reserved.
27
AGRAS T10
User Manual
If the radar module frequently detects obstacles incorrectly, check to make sure the mounting
bracket and the aircraft landing gear are properly secured. If the radar module still does not
work, contact DJI Support or a DJI authorized dealer.
Keep the protective cover of the radar module clean. Clean the surface with a soft damp cloth
and air dry before using again.
Empty Tank
Prole
A prompt appears in the app and the aircraft hovers in place when the spray tank is empty. In Route,
A-B Route, and Manual Plus operation modes the aircraft can also be set to ascend or RTH instead of
hovering.
Usage
1. When an empty tank warning appears in the app, the sprinklers automatically turn off.
2. Make sure that the aircraft is in Manual operation mode. Land the aircraft and stop the motors. Rell
the spray tank and tightly secure the cover.
3. Take off in Manual operation mode and y the aircraft to a safe position. Enter the desired mode to
continue the operation.
Return to Home (RTH)
Home Point: The default home point is the first location where your aircraft received strong
GNSS signals . Note that the white GNSS icon requires at least four bars before the signal is
strong.
RTH: RTH brings the aircraft back to the last recorded home point.
There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH.
Smart RTH
Press and hold the RTH button on the remote controller when GNSS is available to enable Smart RTH.
Both Smart and Failsafe RTH use the same procedure. With Smart RTH, you may control the altitude of
the aircraft to avoid collisions when returning to the home point. Press the RTH button once or push the
pitch stick to exit Smart RTH and regain control of the aircraft.
Low Battery RTH
Low Battery RTH is only available in Route and A-B Route operations. If the Low Battery Action is set
to RTH in the Aircraft Battery settings in the app, the aircraft will pause the operation and enter RTH
automatically when the aircraft battery level reaches the low battery threshold. During RTH, users can
control the altitude of the aircraft to avoid collisions when returning to the home point. Press the RTH
button once or push the pitch stick to exit RTH and regain control of the aircraft.
The aircraft will not enter RTH if the Low Battery Action is set to Warning in the Aircraft Battery settings in
the app.