Avata - User Manual v1.0

DJI Avata
User Manual
29
© 2022 DJI All Rights Reserved.
LED1 LED2 LED3 LED4 Battery Level
89%-100%
76%-88%
64%-75%
51%-63%
39%-50%
26%-38%
14%-25%
1%-13%
Powering On/O
Press the power button once and then press again and hold for two seconds to power the aircraft on or o. The
battery level LEDs display the battery level when the aircraft is powered on. The battery level LEDs turn o when
the aircraft is powered o.
Low Temperature Notice
1. Battery capacity is signicantly reduced when ying at low temperatures from -10° to 5° C (14° to 41° F). Make
sure to fully charge the battery before takeo.
2. Batteries cannot be used in extremely low-temperature environments lower than -10° C (14° F).
3. When in low-temperature environments, end the ight as soon as the goggles display the low battery voltage
warning.
4. To ensure optimal performance, keep the battery temperature above 20° C (68° F).
5. The reduced battery capacity in low-temperature environments reduces the wind speed resistance
performance of the aircraft. Fly with caution.
6. Fly with extra caution at high altitudes.
In cold environments, insert the battery into the battery compartment and power on the aircraft to
warm up before taking o.
Charging the Battery
Fully charge the battery before each use.
1. Charge with a USB charger and connect it to an AC outlet (100-240V, 50/60 Hz). Use a power adapter if
necessary.
2. Connect the Intelligent Flight Battery to the USB charger using DJI Avata Adapter with the battery powered o.
3. The battery level LEDs display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when all the battery level LEDs are o. Detach the adapter when
the battery is fully charged.
The battery level LEDs display the power level of the battery during charging and discharging. The
statuses of the LEDs are dened below:
LED is on. LED is o. LED is blinking.