Avata - User Manual v1.0
Table Of Contents
48
© 2022 DJI All Rights Reserved.
USB Power Delivery chargers are not supported.
Remote Control Devices
DJI Motion Controller
When used with the goggles, the DJI Motion Controller provides an immersive and intuitive ying experience that
allows users to easily control the aircraft using hand movements. Built into the DJI Motion Controller is DJI's O3+
transmission technology, oering a maximum transmission range of 6 mi (10 km). The motion controller works at
both 2.4 and 5.8 GHz and is capable of selecting the best transmission channel automatically.
Operation
Powering On/O
Press the power button once to check the current battery level. Charge before using if the battery level is too low.
Press once then press again and hold for two seconds to power the motion controller on or o.
Charging the Battery
Use a USB-C cable to connect a charger to the USB-C port of the motion controller.
5V, 1A/2A
Controlling the Camera
1. Shutter/Record Button: Press once to take a photo or to start or stop recording. Press and hold to switch
between photo and video mode.
2. Gimbal Tilt Slider: Push up or down to adjust the tilt of the gimbal (only available before takeo, during RTH or
landing).
Gimbal Tilt Slider
Shutter/Record Button