MULTISPECTRAL User Manual 2020.03 v1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Using This Manual Legend Warning Important Hints and Tips Reference Before Flight The following documents have been produced to help you safely operate and make full use of your aircraft: 1. In the Box 2. User Manual 3. Quick Start Guide 4. Disclaimer and Safety Guidelines It is recommended to watch all tutorial videos on the official DJITM website and read the disclaimer and safety guidelines before first time use. Prepare for your first flight by reviewing the quick start guide.
Contents Using This Manual 2 Legend 2 Before Flight 2 Video Tutorials 2 Download DJI GS Pro App 2 Download DJI Terra 2 Product Profile 6 Introduction 6 Feature Highlights 6 Preparing the Aircraft 7 Activating the Aircraft 8 Aircraft Overview 9 Remote Controller Overview 10 Aircraft 12 Profile 12 Flight Modes 12 Aircraft Status Indicators 13 Return to Home (RTH) 14 Aerial Photography Missions 18 RTK Functions 19 Vision System and Infrared Sensing System 20 Flight Rec
Flight Flight Environment Requirements 41 GEO (Geospatial Environment Online) System 41 Flight Restrictions 42 GEO Unlocking 43 Preflight Checklist 44 Calibrating the Compass 44 Starting/Stopping the Motors 45 Stopping Motors Mid-flight 46 Flight Test 46 DJI Assistant 2 for Phantom 49 Installation and Launching 49 Using DJI Assistant 2 for Phantom 49 Appendix Specifications 4 41 © 2020 DJI All Rights Reserved.
Product Profile This section introduces the P4 Multispectral and lists the components of the aircraft and remote controller. © 2020 DJI All Rights Reserved.
Product Profile Introduction The P4 Multispectral is a high-precision drone capable of multispectral imaging functions. The imaging system contains six cameras with 1/2.9-inch CMOS sensors, capable of capturing both color and narrow band images. The OCUSYNCTM HD image transmission built into both the aircraft and remote controller ensures stable transmission.
P4 Multispectral User Manual Preparing the Aircraft 1. Remove the gimbal clamp from the camera as shown in the figure. 2. Attaching the Propellers Mount the propellers with black propeller rings to the motors with black dots. Mount the propellers with sliver propeller rings to the motors without black dots. Press the propeller down onto the mounting plate and rotate in the lock direction until it is secured. 3.
P4 Multispectral User Manual Preparing the Remote Controller 1. Tilt the mobile device holder or the display device on the remote controller to the desired position, then adjust the antennas so they are facing outward. 2. Connecting your mobile device 1 2 3 Press the button on the top right side of the mobile device holder to release the clamp, then adjust the clamp to fit the size of your mobile device. Secure your mobile device in the clamp by pressing down.
P4 Multispectral User Manual Aircraft Overview 10 9 14 8 13 7 6 5 4 11 3 a 12 b 2 c 1 f d e 18 15 1. Gimbal Cameras (with six cameras corresponding to the wave bands below) a. Red Edge (RE) b. Near-Infrared (NIR) c. Green (G) d. Visible Light (RGB) e. Red (R) f. Blue (B) 2. Downward Vision System 16 17 8. Front LEDs 9. Motors 10. Propellers 11. Aircraft Status Indicators 12. OcuSync Antennas 13. Onboard D-RTK Antenna 3. Micro USB Port 14. Spectral Sunlight Sensor 4.
P4 Multispectral User Manual Remote Controller Overview 7 8 9 3 1 17 17 19 4 2 10 5 6 1. Power Button Used to turn the remote controller on and off. 2. Return to Home (RTH) Button Press and hold this button to initiate RTH. 3. Control Sticks Controls aircraft movement. Can be set to Mode 1, Mode 2, or Mode 3. 4. Status LED Indicates whether the remote controller is linked to the aircraft. 5. Battery Level LEDs Displays the battery level of the remote controller. 6.
Aircraft This section introduces the aircraft components, features and functions. © 2020 DJI All Rights Reserved.
Aircraft Profile The P4 Multispectral aircraft includes a flight controller, a communication system, a positioning system, a propulsion system and an Intelligent Flight Battery. This section describes the functions of these components. Flight Modes The P4 Multispectral provides the following flight modes. Use the flight mode switch on the remote controller to switch between different flight modes. The P and S positions on the remote controller are for P-mode, and the A position is for A-mode.
P4 Multispectral User Manual Aircraft Status Indicators The P4 Multispectral has Front LEDs and Aircraft Status Indicators. The positions of these LEDs are shown in the figure below: Front LEDs Aircraft Status Indicators The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft. The Aircraft Status Indicators communicate the system status of the flight controller.
P4 Multispectral User Manual Return to Home (RTH) Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GNSS Home Point If a strong GNSS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched.
P4 Multispectral User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. The user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds for these warnings are automatically determined based on the aircraft’s current altitude and distance from the Home Point. The Low Battery RTH will only be triggered once during the same flight.
P4 Multispectral User Manual When the Critical low battery level warning is triggered and the aircraft begins to land automatically, push the left stick upward to make the aircraft hover at its current altitude, giving you an opportunity to navigate to a more appropriate landing location. The colored zones and markers on the battery level indicator bar reflect the estimated remaining flight time. They are automatically adjusted according to the aircraft’s current location and status.
P4 Multispectral User Manual Aircraft cannot return to the Home Point when GNSS signal is weak ([ ] displays grey) or the module is unavailable. If you move the throttle stick after the aircraft rises above 65 feet (20 meters) but below the pre-set Failsafe RTH altitude, the aircraft will stop ascending and immediately return to the Home Point.
P4 Multispectral User Manual decreases to 0% will the aircraft land. Users retain control of aircraft flight orientation. 3. If Landing Protection is inactive, DJI GS Pro will display a landing prompt when the aircraft descends below 0.3 meters. Tap to confirm or pull down the control stick for 2 seconds to land when the environment is appropriate for landing.
P4 Multispectral User Manual In , set the capture mode, bands to be stored, display mode, and colormap.. Capture mode: Select between single shot and timed shot. The minimum time interval of timed shot can be set to 1 s. When the time interval is set to 1 s, a microSD card with a write speed of at least 50 MB/s is required, such as the microSD card that comes with the aircraft.
P4 Multispectral User Manual Using with the DJI D-RTK 2 Mobile Station 1. Go to Mission Page in DJI GS Pro, tap the icon or RTK on top of the screen to go to the RTK settings menu, and then select D-RTK 2 as the RTK data source. Enable the aircraft RTK at the bottom of the menu to ensure the aircraft has access to RTK data. 2. Tap Link. The remote controller will start beeping. Then press the link button on the mobile station. 3. Tap Connect to establish connection with the server.
P4 Multispectral User Manual Detection Range The detection range of the Vision System and Infrared Sensing System are depicted as follow. Note that the aircraft cannot sense and avoid the obstacles that are not within the detection range. 0.7m 13.1cm 6.8m 7m 6.8m 7m 0.7m In P-mode, both the forward and the rear Vision Systems work if the speed is within 13mph (22kph). At higher speeds, only the vision system facing the direction of travel is active.
P4 Multispectral User Manual Follow the steps below to use Vision Positioning: 1. Turn on the aircraft. The aircraft status indicator will flash green two times, which indicates the Vision Positioning is ready. 2. Gently push the left stick up to lift off and the aircraft will hover in place. Assisted Braking from Obstacle Sensing Powered by the Obstacle Sensing, the aircraft will now be able to actively brake when obstacles are detected around the aircraft.
P4 Multispectral User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. To access this data, connect the aircraft to the PC through the Micro USB port and launch the DJI Assistant 2. Attaching and Detaching the Propellers Use only DJI approved propellers with your aircraft. The grey and black ring on the propeller indicate where they should be attached and in which direction whey should spin.
P4 Multispectral User Manual DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 5870 mAh, a voltage of 15.2 V, and a smart charge/discharge functionality. It should only be charged using an appropriate DJI approved power adapter and charging hub. Intelligent Flight Battery AC Power Adapter Charging Hub The Intelligent Flight Battery must be fully charged before using it for the first time. Never insert or remove the battery when it is turned on.
P4 Multispectral User Manual Using the Battery LED1 LED2 LED3 LED4 Power Button (Built-in LED) Battery Level Indicators Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn green and the Battery Level Indicators will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off.
P4 Multispectral User Manual Checking the Battery Level The Battery Level Indicators display how much power remains. When the battery is turned off, press the Power Button once. The Battery Level Indicators will light up to display the current battery level. See below for details. The Battery Level Indicators will also show the current battery level during charging and discharging. The indicators are defined below. : LED is on. : LED is flashing. : LED is off.
P4 Multispectral User Manual Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Using the Power Adapter and Charging Hub for Charging 1. Connecting to a Power Source Connect the power adapter to a power outlet (100-240V, 50/60Hz), then connect the charging bub to the power adapter. AC Power Adapter Power Outle Charging Hub 2.
P4 Multispectral User Manual Be sure to align the grooves on the Intelligent Flight Battery with the battery slot tracks. The Status LED Indicator will turn solid yellow if the battery is properly inserted. In storage mode, you can power on the Intelligent Flight Batteries to discharge them without having to connect to a power source if all batteries have more than 50% power. Status LED Indicator Description Status LED Indicator Description Charging Mode — Solid Yellow Queuing to charge ......
P4 Multispectral User Manual DJI does not take any responsibility for damage caused by third-party chargers. If the battery level is above 95%, turn on the battery before charging. How to discharge your Intelligent Flight Battery: Place the Intelligent Flight Battery into the battery compartment and turn it on. Fly the aircraft out doors until the battery level is low (such as 20% of power left). © 2020 DJI All Rights Reserved.
Gimbal Cameras This section provides the technical specifications of the cameras and explains the gimbal operation. 30 © 2020 DJI All Rights Reserved.
Gimbal Cameras Cameras Profile The P4 Multispectral imaging system contains six cameras with 1/2.9-inch CMOS sensors, including an RGB camera that produces images in the JPEG format and a multispectral camera array containing five cameras that produce multispectral images in the TIFF format. It uses a global shutter to ensure performance.
P4 Multispectral User Manual Camera Operation Use the shutter and video recording buttons on the remote controller or in DJI GS Pro to shoot the photos or videos. Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. Turn the dial to adjust the gimbal pitch angle. The controllable range of the pitch angle is -90° to +30°.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and cameras. © 2020 DJI All Rights Reserved.
Remote Controller Profile The remote controller features DJI’s long-range transmission technology OcuSync that is capable of controlling the aircraft and the gimbal cameras at a maximum transmission range of 4.3 mi (7 km). Connect an iPad to the remote controller via the USB port to use DJI GS Pro app to plan and perform missions. Export the captured images for analysis and create multispectral maps. Compliance Version: The remote controller is compliant with local compliance and regulations.
P4 Multispectral User Manual Charging the Remote Controller Charge the remote controller using the included charger. Refer to the figure below for more details. Power Outlet Charger Controlling the Camera Shoot videos/photos, and adjust gimbal pitch angle via the Shutter Button, Video Recording Button, and Gimbal Dial on the remote controller. 1 2 3 1. Gimbal Dial Control the tilt of the gimbal. Turn left to tilt the gimbal upward and right to tilt the gimbal downward. 2.
P4 Multispectral User Manual Controlling the Aircraft This section explains how to control the orientation of the aircraft through the remote controller. Control can be set to Mode 1 , Mode 2 or Mode 3, or to a custom mode.
P4 Multispectral User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the P4 Multispectral will hover in place. The more the stick is pushed away from the center position, the faster the P4 Multispectral will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
P4 Multispectral User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between P-mode and A-mode. Position Figure Position 1 Flight Mode Position 1 P-mode Position 2 P-mode Position 3 A-mode Position 2 Position 3 RTH Button Press and hold the RTH button to start the Return to Home (RTH) procedure. The LED ring around the RTH Button will blink white to indicate that the aircraft is entering RTH mode.
P4 Multispectral User Manual Remote Controller Status LED The Status LED reflects the strength of the connection between the remote controller and the aircraft. The RTH LED indicates the RTH status of the aircraft. The table below contains more information about these indicators. RTH LED Status LED Status LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft.
Flight This section describes safe flight practices and flight restrictions. 40 © 2020 DJI All Rights Reserved.
Flight Once the pre-flight preparation is complete, it is recommended to hone your flight skills through training and practice flying safely. The altitude limit is 1, 640 feet (500 meters). Avoid flying at any altitudes higher. It is important to understand basic flight guidelines for the safety of both you and those around you. Refer to the disclaimer and safety guidelines for more information. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions.
P4 Multispectral User Manual Warning Zones, Enhanced Warning Zones, Authorization Zones, Altitude Zones, and Restricted Zones. By default, GEO limits flights into or taking off within zones that may result in safety or security concerns. There is a GEO Zone Map, which contains comprehensive global GEO Zone information on the official DJI website: https://www.dji.com/flysafe. The GEO System is for advisory purposes only.
P4 Multispectral User Manual GEO Zone Flight Restrictions GEO Zone Description Takeoff: The aircraft’s motors cannot be started. Restricted Zone In-flight: When GNSS signal changes from weak to strong, DJI GS RTK starts a 20-second countdown. Once the countdown is over, the aircraft immediately lands in semi-automatic descent mode and turns off its motors after landing. In-flight: When the aircraft approaches the boundary of the Restricted Zone, it automatically decelerates and hovers.
P4 Multispectral User Manual Zone and other requirements. It is available in all countries and can be applied for on the website: https://www.dji.com/flysafe. For more information about unlocking, please visit https://www.dji.com/flysafe or contact flysafe@ dji.com. Preflight Checklist 1. Remote controller, Intelligent Flight Battery are fully charged. 2. Propellers are mounted correctly and firmly. 3. MicroSD card has been inserted. 4. Gimbal and camera are functioning normally. 5.
P4 Multispectral User Manual 4. Re-calibrate the aircraft if the aircraft status indicators glows blinking red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
P4 Multispectral User Manual OR Method 1 Method 2 Stopping Motors Mid-flight Perform the CSC to stop the motors. It can be enabled in the app. Go to Camera View, tap , Aircraft Settings, , then tap Advanced Settings to enable Stop Motors in Urgency. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. OR Flight Test Takeoff/Landing Procedures 1. Place the aircraft in an open, flat area with the battery level indicators facing towards you. 2.
P4 Multispectral User Manual Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Only shoot photos or record videos when flying in P-mode. 3. Always fly in good weather conditions and avoid flying in rain or heavy wind. 4. Choose the camera settings that suit your needs. Settings include ISO, exposure values, etc. 5. Perform flight tests to establish flight routes and preview scenes. 6.
DJI Assistant 2 for Phantom This section introduces the usage of the DJI Assistant 2 for Phantom software. 48 © 2020 DJI All Rights Reserved.
DJI Assistant 2 for Phantom Update firmware, copy flight records and calibrate the Vision System in the DJI Assistant 2 for Phantom software. For users that own DJI Agras aircraft, the DJI Assistant 2 for MG can also be used for the functions above. Installation and Launching 1. Download the software installation file from the P4 Multispectral download page: https://www.dji.com/p4-multispectral/downloads 2. Install the software. 3. Launch DJI Assistant 2 for Phantom.
Appendix 50 © 2020 DJI All Rights Reserved.
Appendix Specifications Aircraft Takeoff Weight 1487 g Diagonal Distance (Propellers Excluded) 350 mm Max Service Ceiling Above Sea Level 19685 ft (6000 m) Max Ascent Speed 6 m/s (automatic flight); 5 m/s (manual control) Max Descent Speed 3 m/s Max Speed 31 mph (50 kph) (P-mode); 36 mph (58 kph) (A-mode) Max Flight Time Approx. 27 minutes Operating Temperature 0° to 40° C (32° to 104° F) Operating Frequency 2.4000 GHz to 2.4835 GHz (Europe, Japan, Korea) 5.725 GHz to 5.
P4 Multispectral User Manual Rate of Data Collection Gimbal Controllable Range Vision System Max operating area of approx. 0.63 km2 for a single flight at an altitude of 180 m, i.e., GSD is approx. 9.52 cm/pixel, with a forward overlap rate of 80% and a side overlap ratio of 60%, during a flight that drains the battery from 100% to 30%. Pitch: -90° to +30° Velocity Range ≤ 31 mph (50 kph) at 6.
P4 Multispectral User Manual Remote Controller Operating Frequency 2.4000 GHz to 2.4835 GHz (Europe, Japan, Korea) 5.725 GHz to 5.850 GHz (Other countries/regions)[1] Built-in Battery 2.4 GHz: < 20 dBm (CE / MIC / KCC) 5.8 GHz: < 26 dBm (FCC / SRRC / NCC) FCC / NCC: 4.3 mi (7 km); CE / MIC / KCC / SRRC: 3.1 mi (5 km) (Unobstructed, free of interference) 6000 mAh LiPo 2S Operating Current / Voltage 1.2 A @ 7.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from https://www.dji.com/p4-multispectral If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2020 DJI All Rights Reserved.
MULTISPECTRAL In the Box 物品清单 物品清單 同梱物 구성품 설명서 Lieferumfang Contenido del embalaje Contenu de l'emballage Contenuto della confezione In de doos Incluído na embalagem Incluído na embalagem Комплект поставки
×1 ×1 Remote Controller 遥控器 遙控器 Aircraft Body 飞行器 航拍機 送信機 조종기 Fernsteuerung Control remoto Radiocommande Dispositivo di controllo remoto Afstandsbediening Telecomando Controle remoto Пульт дистанционного управления 機体 기체 본체 Fluggerät Fuselaje de la aeronave Corps de l'appareil Corpo del velivolo Dronechassis Corpo da aeronave Estrutura da aeronave Корпус дрона ×1 AC Power Adapter 电源适配器 電源適配器 AC 電源アダプター AC 전원 어댑터 Netzteil Adaptador de alimentación de CA Adaptateur d'alimentation CA Adattatore di ali
Accessories ×1 以下为赠品 ×1 ×1 隨附品項 アクセサリー 액세서리 Zubehör Accesorios Accessoires Accessori Accessoires Acessórios Acessórios Аксессуары Gimbal Clamp 云台锁扣 雲台鎖扣 microSD Card microSD 卡 microSD 卡 Micro USB Cable Micro USB 线 Micro USB 纜線 Manuals Guides Accessories are not covered by warranty.
MULTISPECTRAL Quick Start Guide 快速入门指南 快速入門指南 クイックスタートガイド 퀵 스타트 가이드 Kurzanleitung Guía de inicio rápido Guide de démarrage rapide Guida di avvio rapido Snelstartgids Guia de início rápido Guia de Início Rápido Краткое руководство пользователя v1.
P4 Multispectral EN The P4 Multispectral is a high-precision drone capable of multispectral imaging functions. The imaging system contains six cameras with 1/2.9-inch CMOS sensors, including an RGB camera and a multispectral camera array containing five cameras, all at 2MP with global shutter, on a 3-axis stabilized gimbal. The spectral sunlight sensor on top of the aircraft detects the solar irradiance in real-time for image compensation, maximizing the accuracy of collected multispectral data.
Remote Controller 1. Power Button 11. Gimbal Dial 2. Return to Home (RTH) Button 12. Reserved Dial 13. Video Recording Button 3. Control Sticks 4. Status LED 14. Flight Mode Switch 7 5. Battery Level LEDs 15. Shutter Button* 8 6. Power Port 16. Reserved Blank Button 9 17. C1 and C2 Buttons (customizable) 7. Mobile Device Holder 8. Small Device Positioning Tabs (for mobile phones) 18. USB Port (for mobile device connection) 3 9. Antennas 19. Micro USB Port 1 10.
Using the P4 Multispectral 1. Downloading the DJI GS Pro App EN The latest version of DJI GS Pro is required when using with the P4 Multispectral. Search for DJI GS Pro* in App Store or scan the QR code to download the app on your iPad. DJI GS Pro Internet When using your P4 Multispectral for the first time, activate it using DJI GS Pro. Ensure that your iPad has access to the internet. * Visit the official DJI website for more information about DJI GS Pro. https://www.dji.com/ground-station-pro 2.
4. Preparing the Remote Controller 2 1 EN Strong Weak 3 Unfolding the Remote Controller Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the antennas or fly the aircraft closer. Optimal Transmission Zone 5. Preparing for Takeoff Press the propeller down onto the mounting plate and rotate in the lock direction until secure. Black propeller rings go on motors with black dots. ● Silver propeller rings go on motors without black dots.
6. Flight For a safe take-off, make sure that the Aircraft Status Indicators blink green slowly (using RTK* or GNSS for positioning). Takeoff Landing EN Left stick down slowly until you touch the ground Hold for three seconds to stop the motors OR Combination Stick Command to start/stop the motors ● ● ● Left stick (in Mode 2) up slowly to take off Spinning propellers can be dangerous. Stay away from spinning propellers and motors.
Multi-Frequency Multi-System HighPrecision RTK GNSS Frequency Used GPS: L1/L2; GLONASS: L1/L2; BeiDou: B1/B2; Galileo[2]: E1/E5 First-Fixed Time: < 50 s Positioning Accuracy: Vertical 1.5 cm + 1 ppm (RMS); Horizontal 1 cm + 1 ppm (RMS). 1 ppm indicates error with a 1 mm increase over 1 km of movement. Velocity Accuracy: 0.03 m/s ● Mapping Functions (H/18.9) cm/pixel, H indicates the aircraft altitude relative to the area mapped (unit: m) Rate of Data Collection Max operating area of approx. 0.
DJI is a trademark of DJI. Copyright © 2020 DJI All Rights Reserved. DJI 是大疆创新的商标 Copyright © 2020 大疆创新 版权所有 YC.BZ.SS001081.
MULTISPECTRAL 行业应用 For online support, please scan this code with Facebook Messenger 微信扫一扫关注 大疆农业服务公众号 微信扫一扫关注 大疆行业应用公众号 Printed in China.
MULTISPECTRAL DISCLAIMER AND SAFETY GUIDELINES 免责声明和安全操作指引 免責聲明與安全指導方針 免責事項と安全に関するガイドライン 고지 사항 및 안전 가이드 HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE D'EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN DECLARAÇÃO DE EXONERAÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA ISENÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA ЗАЯВЛЕНИЕ ОБ ОТКАЗЕ ОТ О
Safety at a Glance EN The DJITM P4 Multispectral is NOT a toy and is NOT suitable for children under the age of 18. Note that ‘Safety at a Glance’ only provides a quick overview of the safety tips. Make sure you read and understand the remaining sections of the Disclaimer and Safety Guidelines. 1. Environmental Consideration • Always fly at locations that are clear of building and other obstacles. • DO NOT fly above or near large crowds. • Avoid flying at altitudes above 400 feet (120 m).
OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT ANY OF THOSE ISSUES WILL BE CORRECTED. SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF WARRANTIES AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in these Safety Guidelines.
Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
設備名稱：P4 Multispectral 型號（型式）：WM336 限用物質及其化學符號 單元 Unit 鉛 Lead (Pb) 汞 Mercury (Hg) 鎘 Cadmium (Cd) 六價鉻 Hexavalent chromium (Cr+6) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 線路板 － ○ ○ ○ ○ ○ 外殼 － ○ ○ ○ ○ ○ 內部線材 ○ ○ ○ ○ ○ ○ 金屬部件 ○ ○ ○ ○ ○ ○ 其他配件 ○ ○ ○ ○ ○ ○ 備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。 備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 備考 3.
DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 고객지원 DJI Support Servicio de asistencia de DJI Service client DJI Assistenza DJI DJI-ondersteuning Suporte DJI Assistência da DJI Техническая поддержка DJI http://www.dji.com/support DJI is a trademark of DJI. Copyright © 2019 DJI All Rights Reserved. DJI 是大疆创新的商标。 Copyright © 2019 大疆创新 版权所有 YC.BZ.SS001082.01 Printed in China.
DJI/Customer service 1 (818) 235-0789 https://www.dji.
Additional charges may apply outside DJI’s normal service areas. Please contact DJI for information specific to your location What to do Before Obtaining After-sales Service Before obtaining after-sales service, the following steps must be taken: √ Follow the procedures specified by DJI. √ Backup all data contained on your product’s SD card. √ Except for flight logs, remove all data, including confidential information, proprietary information and personal information, from the product.
If you obtain service under this policy, you authorize DJI to store, use, and process your flight log information and your contact information, including name, phone numbers, address, and email address. DJI may use this information to perform service under this policy. We may contact you to inquire about your satisfaction with our service or to notify you about any product recalls or safety issues.
When receiving service, DJI is responsible for loss or damage to your product only while it is in DJI's possession or in transit, if DJI is responsible for transportation. DJI is NOT responsible for loss or disclosure of any data, including confidential information, proprietary information, or personal information, contained in a product.
