User Manual

Scenario 7 – Phantom 2 with 2.4GHz Remote Control

1. Connect HDMI IN port to HDMI out port on camera with HDMI cable.

2. Connect Gimbal Port to EXP port (6-pin port) on DJI Phantom 2 central board with Gimbal cable. To

access the EXP port, you will need to remove the top of the DJI Phantom 2 case. See below example

for details.

3. Connect DBUS port on air system with X2 port on the flight controller.

Note：

1. Linking is required when using with PPM 2.4GHz receiver.

Scenario 8 – Phantom 2 with 5.8GHz Remote Control

1. Connect HDMI IN port to HDMI out port on camera with HDMI cable.

2. Connect Gimbal Port to EXP port (6-pin port) on DJI Phantom 2 central board with Gimbal cable. To

access the EXP port, you will need to remove the top of the DJI Phantom 2 case. See below example

for details.

Note：

1. Aircraft will need to be modified to accommodate 5.8GHz receiver.

HDMI

EXP